diff mbox series

[v1,2/7] net: dsa: realtek: rtl8365mb: Make use of irq_get_trigger_type()

Message ID 20240902225534.130383-3-vassilisamir@gmail.com (mailing list archive)
State Not Applicable
Delegated to: Johannes Berg
Headers show
Series Use functionality of irq_get_trigger_type() | expand

Commit Message

Vasileios Amoiridis Sept. 2, 2024, 10:55 p.m. UTC
Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
simple irq_get_trigger_type(irq).

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
---
 drivers/net/dsa/realtek/rtl8365mb.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Alvin Šipraga Sept. 2, 2024, 11:38 p.m. UTC | #1
On Tue, Sep 03, 2024 at 12:55:29AM GMT, Vasileios Amoiridis wrote:
> Convert irqd_get_trigger_type(irq_get_irq_data(irq)) cases to the more
> simple irq_get_trigger_type(irq).
> 
> Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
> ---
>  drivers/net/dsa/realtek/rtl8365mb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>

Btw, I think this is something for net-next (not a bugfix?), so you
would normally add the appropriate prefix, i.e. [PATCH net-next ...],
when sending to netdev.

> 
> diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
> index b9674f68b756..ad7044b295ec 100644
> --- a/drivers/net/dsa/realtek/rtl8365mb.c
> +++ b/drivers/net/dsa/realtek/rtl8365mb.c
> @@ -1740,7 +1740,7 @@ static int rtl8365mb_irq_setup(struct realtek_priv *priv)
>  	}
>  
>  	/* Configure chip interrupt signal polarity */
> -	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
> +	irq_trig = irq_get_trigger_type(irq);
>  	switch (irq_trig) {
>  	case IRQF_TRIGGER_RISING:
>  	case IRQF_TRIGGER_HIGH:
> -- 
> 2.25.1
>
diff mbox series

Patch

diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index b9674f68b756..ad7044b295ec 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -1740,7 +1740,7 @@  static int rtl8365mb_irq_setup(struct realtek_priv *priv)
 	}
 
 	/* Configure chip interrupt signal polarity */
-	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+	irq_trig = irq_get_trigger_type(irq);
 	switch (irq_trig) {
 	case IRQF_TRIGGER_RISING:
 	case IRQF_TRIGGER_HIGH: