diff mbox series

[-next] PCI: altera: Replace TLP_REQ_ID() with macro PCI_DEVID()

Message ID 20240828104202.3683491-1-ruanjinjie@huawei.com (mailing list archive)
State Accepted
Delegated to: Krzysztof Wilczyński
Headers show
Series [-next] PCI: altera: Replace TLP_REQ_ID() with macro PCI_DEVID() | expand

Commit Message

Jinjie Ruan Aug. 28, 2024, 10:42 a.m. UTC
The TLP_REQ_ID's function is same as current PCI_DEVID()
macro, replace it.

Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
---
 drivers/pci/controller/pcie-altera.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

Comments

Manivannan Sadhasivam Aug. 28, 2024, 3:56 p.m. UTC | #1
On Wed, Aug 28, 2024 at 06:42:02PM +0800, Jinjie Ruan wrote:
> The TLP_REQ_ID's function is same as current PCI_DEVID()
> macro, replace it.
> 
> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/pci/controller/pcie-altera.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
> index ef73baefaeb9..650b2dd81c48 100644
> --- a/drivers/pci/controller/pcie-altera.c
> +++ b/drivers/pci/controller/pcie-altera.c
> @@ -55,12 +55,11 @@
>  #define TLP_READ_TAG			0x1d
>  #define TLP_WRITE_TAG			0x10
>  #define RP_DEVFN			0
> -#define TLP_REQ_ID(bus, devfn)		(((bus) << 8) | (devfn))
>  #define TLP_CFG_DW0(pcie, cfg)		\
>  		(((cfg) << 24) |	\
>  		  TLP_PAYLOAD_SIZE)
>  #define TLP_CFG_DW1(pcie, tag, be)	\
> -	(((TLP_REQ_ID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))
> +	(((PCI_DEVID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))
>  #define TLP_CFG_DW2(bus, devfn, offset)	\
>  				(((bus) << 24) | ((devfn) << 16) | (offset))
>  #define TLP_COMP_STATUS(s)		(((s) >> 13) & 7)
> -- 
> 2.34.1
>
Krzysztof Wilczyński Sept. 6, 2024, 6:34 a.m. UTC | #2
Hello,

> The TLP_REQ_ID's function is same as current PCI_DEVID()
> macro, replace it.

Applied to controller/altera, thank you!

[1/1] PCI: altera: Replace TLP_REQ_ID() with macro PCI_DEVID()"
      https://git.kernel.org/pci/pci/c/8745aaab60a6

	Krzysztof
Bjorn Helgaas Sept. 10, 2024, 12:30 a.m. UTC | #3
On Wed, Aug 28, 2024 at 06:42:02PM +0800, Jinjie Ruan wrote:
> The TLP_REQ_ID's function is same as current PCI_DEVID()
> macro, replace it.
> 
> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
> ---
>  drivers/pci/controller/pcie-altera.c | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
> index ef73baefaeb9..650b2dd81c48 100644
> --- a/drivers/pci/controller/pcie-altera.c
> +++ b/drivers/pci/controller/pcie-altera.c
> @@ -55,12 +55,11 @@
>  #define TLP_READ_TAG			0x1d
>  #define TLP_WRITE_TAG			0x10
>  #define RP_DEVFN			0
> -#define TLP_REQ_ID(bus, devfn)		(((bus) << 8) | (devfn))
>  #define TLP_CFG_DW0(pcie, cfg)		\
>  		(((cfg) << 24) |	\
>  		  TLP_PAYLOAD_SIZE)
>  #define TLP_CFG_DW1(pcie, tag, be)	\
> -	(((TLP_REQ_ID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))
> +	(((PCI_DEVID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))

This doesn't cause a problem per se, but PCI_DEVID() is defined
basically as a PCI core convenience without any particular connection
to the PCIe Requester ID format, so I don't think this is an
improvement.

I think it *would* be an improvement to move TLP_REQ_ID() to
drivers/pci/pci.h, where other drivers could share it.  

It's obvious how the Requester ID must be laid out, but I took a quick
look through the PCIe spec and was surprised that I couldn't find a
clear definition of it, unlike the *Completer ID*, which is specified
in PCIe r6.0, sec 2.2.9.1.

Bjorn
Krzysztof Wilczyński Sept. 10, 2024, 7:12 p.m. UTC | #4
Hello,

[...]
> >  #define TLP_READ_TAG			0x1d
> >  #define TLP_WRITE_TAG			0x10
> >  #define RP_DEVFN			0
> > -#define TLP_REQ_ID(bus, devfn)		(((bus) << 8) | (devfn))
> >  #define TLP_CFG_DW0(pcie, cfg)		\
> >  		(((cfg) << 24) |	\
> >  		  TLP_PAYLOAD_SIZE)
> >  #define TLP_CFG_DW1(pcie, tag, be)	\
> > -	(((TLP_REQ_ID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))
> > +	(((PCI_DEVID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))
> 
> This doesn't cause a problem per se, but PCI_DEVID() is defined
> basically as a PCI core convenience without any particular connection
> to the PCIe Requester ID format, so I don't think this is an
> improvement.

I will drop this patch based on feedback from Bjorn.

	Krzysztof
diff mbox series

Patch

diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index ef73baefaeb9..650b2dd81c48 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -55,12 +55,11 @@ 
 #define TLP_READ_TAG			0x1d
 #define TLP_WRITE_TAG			0x10
 #define RP_DEVFN			0
-#define TLP_REQ_ID(bus, devfn)		(((bus) << 8) | (devfn))
 #define TLP_CFG_DW0(pcie, cfg)		\
 		(((cfg) << 24) |	\
 		  TLP_PAYLOAD_SIZE)
 #define TLP_CFG_DW1(pcie, tag, be)	\
-	(((TLP_REQ_ID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))
+	(((PCI_DEVID(pcie->root_bus_nr,  RP_DEVFN)) << 16) | (tag << 8) | (be))
 #define TLP_CFG_DW2(bus, devfn, offset)	\
 				(((bus) << 24) | ((devfn) << 16) | (offset))
 #define TLP_COMP_STATUS(s)		(((s) >> 13) & 7)