Message ID | 20240828104202.3683491-1-ruanjinjie@huawei.com (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Krzysztof Wilczyński |
Headers | show |
Series | [-next] PCI: altera: Replace TLP_REQ_ID() with macro PCI_DEVID() | expand |
On Wed, Aug 28, 2024 at 06:42:02PM +0800, Jinjie Ruan wrote: > The TLP_REQ_ID's function is same as current PCI_DEVID() > macro, replace it. > > Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> - Mani > --- > drivers/pci/controller/pcie-altera.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c > index ef73baefaeb9..650b2dd81c48 100644 > --- a/drivers/pci/controller/pcie-altera.c > +++ b/drivers/pci/controller/pcie-altera.c > @@ -55,12 +55,11 @@ > #define TLP_READ_TAG 0x1d > #define TLP_WRITE_TAG 0x10 > #define RP_DEVFN 0 > -#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn)) > #define TLP_CFG_DW0(pcie, cfg) \ > (((cfg) << 24) | \ > TLP_PAYLOAD_SIZE) > #define TLP_CFG_DW1(pcie, tag, be) \ > - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) > + (((PCI_DEVID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) > #define TLP_CFG_DW2(bus, devfn, offset) \ > (((bus) << 24) | ((devfn) << 16) | (offset)) > #define TLP_COMP_STATUS(s) (((s) >> 13) & 7) > -- > 2.34.1 >
Hello, > The TLP_REQ_ID's function is same as current PCI_DEVID() > macro, replace it. Applied to controller/altera, thank you! [1/1] PCI: altera: Replace TLP_REQ_ID() with macro PCI_DEVID()" https://git.kernel.org/pci/pci/c/8745aaab60a6 Krzysztof
On Wed, Aug 28, 2024 at 06:42:02PM +0800, Jinjie Ruan wrote: > The TLP_REQ_ID's function is same as current PCI_DEVID() > macro, replace it. > > Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> > --- > drivers/pci/controller/pcie-altera.c | 3 +-- > 1 file changed, 1 insertion(+), 2 deletions(-) > > diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c > index ef73baefaeb9..650b2dd81c48 100644 > --- a/drivers/pci/controller/pcie-altera.c > +++ b/drivers/pci/controller/pcie-altera.c > @@ -55,12 +55,11 @@ > #define TLP_READ_TAG 0x1d > #define TLP_WRITE_TAG 0x10 > #define RP_DEVFN 0 > -#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn)) > #define TLP_CFG_DW0(pcie, cfg) \ > (((cfg) << 24) | \ > TLP_PAYLOAD_SIZE) > #define TLP_CFG_DW1(pcie, tag, be) \ > - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) > + (((PCI_DEVID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) This doesn't cause a problem per se, but PCI_DEVID() is defined basically as a PCI core convenience without any particular connection to the PCIe Requester ID format, so I don't think this is an improvement. I think it *would* be an improvement to move TLP_REQ_ID() to drivers/pci/pci.h, where other drivers could share it. It's obvious how the Requester ID must be laid out, but I took a quick look through the PCIe spec and was surprised that I couldn't find a clear definition of it, unlike the *Completer ID*, which is specified in PCIe r6.0, sec 2.2.9.1. Bjorn
Hello, [...] > > #define TLP_READ_TAG 0x1d > > #define TLP_WRITE_TAG 0x10 > > #define RP_DEVFN 0 > > -#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn)) > > #define TLP_CFG_DW0(pcie, cfg) \ > > (((cfg) << 24) | \ > > TLP_PAYLOAD_SIZE) > > #define TLP_CFG_DW1(pcie, tag, be) \ > > - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) > > + (((PCI_DEVID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) > > This doesn't cause a problem per se, but PCI_DEVID() is defined > basically as a PCI core convenience without any particular connection > to the PCIe Requester ID format, so I don't think this is an > improvement. I will drop this patch based on feedback from Bjorn. Krzysztof
diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c index ef73baefaeb9..650b2dd81c48 100644 --- a/drivers/pci/controller/pcie-altera.c +++ b/drivers/pci/controller/pcie-altera.c @@ -55,12 +55,11 @@ #define TLP_READ_TAG 0x1d #define TLP_WRITE_TAG 0x10 #define RP_DEVFN 0 -#define TLP_REQ_ID(bus, devfn) (((bus) << 8) | (devfn)) #define TLP_CFG_DW0(pcie, cfg) \ (((cfg) << 24) | \ TLP_PAYLOAD_SIZE) #define TLP_CFG_DW1(pcie, tag, be) \ - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) + (((PCI_DEVID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag << 8) | (be)) #define TLP_CFG_DW2(bus, devfn, offset) \ (((bus) << 24) | ((devfn) << 16) | (offset)) #define TLP_COMP_STATUS(s) (((s) >> 13) & 7)
The TLP_REQ_ID's function is same as current PCI_DEVID() macro, replace it. Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> --- drivers/pci/controller/pcie-altera.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)