| Message ID | 20240912170025.455167-1-valentina.fernandezalanis@microchip.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add Microchip IPC mailbox and remoteproc support | expand |
Hi Valentina, On Thu, 12 Sept 2024 at 10:48, Valentina Fernandez <valentina.fernandezalanis@microchip.com> wrote: > > Hello all, > > This series adds support for the Microchip Inter-Processor Communication > (IPC) mailbox controller, as well as an IPC remoteproc platform driver. > > Microchip's family of RISC-V SoCs typically has one or more clusters > that can be configured to run in Asymmetric Multi-Processing (AMP) mode. > > The Microchip IPC is used to send messages between processors using > an interrupt signaling mechanism. The driver uses the RISC-V Supervisor > Binary Interface (SBI) to communicate with software running in machine > mode (M-mode) to access the IPC hardware block. > > Additional details on the Microchip vendor extension and the IPC > function IDs described in the driver can be found in the following > documentation: > > https://github.com/linux4microchip/microchip-sbi-ecall-extension > > The IPC remoteproc platform driver allows for starting and stopping > firmware on the remote cluster(s) and facilitates RPMsg communication. > The remoteproc attach/detach operations are also supported for use cases > where the firmware is loaded by the Hart Software Services > (zero-stage bootloader) before Linux boots. > > Error Recovery and Power Management features are not currently > supported in the remoteproc platform driver. > > The PIC64GX MPU has a Mi-V IHC block, this will be added to the PIC64GX > dts after the initial upstreaming: > > https://patchwork.kernel.org/project/linux-riscv/patch/20240725121609.13101-18-pierre-henry.moussay@microchip.com/ > > Thanks, > Valentina > > Valentina Fernandez (5): > riscv: asm: vendorid_list: Add Microchip Technology to the vendor list > dt-bindings: mailbox: add binding for Microchip IPC mailbox driver > mailbox: add Microchip IPC support > dt-bindings: remoteproc: add binding for Microchip IPC remoteproc > remoteproc: add support for Microchip IPC remoteproc platform driver > > .../bindings/mailbox/microchip,sbi-ipc.yaml | 115 ++++ > .../remoteproc/microchip,ipc-remoteproc.yaml | 84 +++ > arch/riscv/include/asm/vendorid_list.h | 1 + > drivers/mailbox/Kconfig | 12 + > drivers/mailbox/Makefile | 2 + > drivers/mailbox/mailbox-mchp-ipc-sbi.c | 539 ++++++++++++++++++ > drivers/remoteproc/Kconfig | 12 + > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/mchp_ipc_remoteproc.c | 461 +++++++++++++++ > include/linux/mailbox/mchp-ipc.h | 23 + > 10 files changed, 1250 insertions(+) It might be easier to split this patchset in two and proceed incrementally, i.e upstream the mailbox driver first and then the remoteproc part. Regards, Mathieu > create mode 100644 Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml > create mode 100644 Documentation/devicetree/bindings/remoteproc/microchip,ipc-remoteproc.yaml > create mode 100644 drivers/mailbox/mailbox-mchp-ipc-sbi.c > create mode 100644 drivers/remoteproc/mchp_ipc_remoteproc.c > create mode 100644 include/linux/mailbox/mchp-ipc.h > > -- > 2.34.1 >
Hi Valentina, On Thu, 12 Sept 2024 at 10:48, Valentina Fernandez <valentina.fernandezalanis@microchip.com> wrote: > > Hello all, > > This series adds support for the Microchip Inter-Processor Communication > (IPC) mailbox controller, as well as an IPC remoteproc platform driver. > > Microchip's family of RISC-V SoCs typically has one or more clusters > that can be configured to run in Asymmetric Multi-Processing (AMP) mode. > > The Microchip IPC is used to send messages between processors using > an interrupt signaling mechanism. The driver uses the RISC-V Supervisor > Binary Interface (SBI) to communicate with software running in machine > mode (M-mode) to access the IPC hardware block. > > Additional details on the Microchip vendor extension and the IPC > function IDs described in the driver can be found in the following > documentation: > > https://github.com/linux4microchip/microchip-sbi-ecall-extension > > The IPC remoteproc platform driver allows for starting and stopping > firmware on the remote cluster(s) and facilitates RPMsg communication. > The remoteproc attach/detach operations are also supported for use cases > where the firmware is loaded by the Hart Software Services > (zero-stage bootloader) before Linux boots. > > Error Recovery and Power Management features are not currently > supported in the remoteproc platform driver. > > The PIC64GX MPU has a Mi-V IHC block, this will be added to the PIC64GX > dts after the initial upstreaming: > > https://patchwork.kernel.org/project/linux-riscv/patch/20240725121609.13101-18-pierre-henry.moussay@microchip.com/ > > Thanks, > Valentina > > Valentina Fernandez (5): > riscv: asm: vendorid_list: Add Microchip Technology to the vendor list > dt-bindings: mailbox: add binding for Microchip IPC mailbox driver > mailbox: add Microchip IPC support > dt-bindings: remoteproc: add binding for Microchip IPC remoteproc > remoteproc: add support for Microchip IPC remoteproc platform driver > > .../bindings/mailbox/microchip,sbi-ipc.yaml | 115 ++++ > .../remoteproc/microchip,ipc-remoteproc.yaml | 84 +++ > arch/riscv/include/asm/vendorid_list.h | 1 + > drivers/mailbox/Kconfig | 12 + > drivers/mailbox/Makefile | 2 + > drivers/mailbox/mailbox-mchp-ipc-sbi.c | 539 ++++++++++++++++++ > drivers/remoteproc/Kconfig | 12 + > drivers/remoteproc/Makefile | 1 + > drivers/remoteproc/mchp_ipc_remoteproc.c | 461 +++++++++++++++ > include/linux/mailbox/mchp-ipc.h | 23 + I would advise splitting the two patchsets, i.e one for the mailbox driver and another one for the remoteproc. I would also start with the mailbox and then go with the remoteproc. Thanks, Mathieu > 10 files changed, 1250 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mailbox/microchip,sbi-ipc.yaml > create mode 100644 Documentation/devicetree/bindings/remoteproc/microchip,ipc-remoteproc.yaml > create mode 100644 drivers/mailbox/mailbox-mchp-ipc-sbi.c > create mode 100644 drivers/remoteproc/mchp_ipc_remoteproc.c > create mode 100644 include/linux/mailbox/mchp-ipc.h > > -- > 2.34.1 >
Hi Valentina, On 9/12/24 10:00, Valentina Fernandez wrote: > Additional details on the Microchip vendor extension and the IPC > function IDs described in the driver can be found in the following > documentation: > > https://github.com/linux4microchip/microchip-sbi-ecall-extension > > The IPC remoteproc platform driver allows for starting and stopping > firmware on the remote cluster(s) and facilitates RPMsg communication. > The remoteproc attach/detach operations are also supported for use cases > where the firmware is loaded by the Hart Software Services > (zero-stage bootloader) before Linux boots. Would you mind help clarifying the need for SBI_EXT_RPROC_STATE/STOP/...? If I'm not mistaken, the HW you are targeting is described in https://ww1.microchip.com/downloads/aemDocuments/documents/MPU64/ProductDocuments/SupportingCollateral/Asymmetric_Multi-Processing_on_PIC64GX_White_Paper.pdf (typo in the page 4, U51 -> E51) In SBI, do you put hart1-3 and hart4 into 2 separate domains? If not, I don't see why you can't just use HSM extension from SBI to kick rproc. Also, how stable is this microchip-sbi-ecall-extension? Is it subject to changes down the road? I don't see a probe() like SBI function, so the kernel kind of assume it can call those microchip extensions without causing unintended effects. This means those extension FIDs must be stable and can no longer change once this code is in. Perhaps checking-in the microchip SBI extensions to major SBI implementations such as openSBI first would be better? Bo
On Tue, Sep 17, 2024 at 10:45:02AM +0000, Valentina.FernandezAlanis@microchip.com wrote: > On 16/09/2024 23:28, Bo Gan wrote: > > Perhaps checking-in > > the microchip SBI extensions to major SBI implementations such as openSBI > > first would be better? It's worth pointing out that the "major SBI implementations" do not support the platform this is currently being used on.