diff mbox series

[v2,2/3] net: stmmac: Add glue layer for T-HEAD TH1520 SoC

Message ID 20240926-th1520-dwmac-v2-2-f34f28ad1dc9@tenstorrent.com (mailing list archive)
State Superseded
Headers show
Series Add the dwmac driver support for T-HEAD TH1520 SoC | expand

Checks

Context Check Description
conchuod/vmtest-fixes-PR fail merge-conflict

Commit Message

Drew Fustini Sept. 26, 2024, 6:15 p.m. UTC
From: Jisheng Zhang <jszhang@kernel.org>

Add dwmac glue driver to support the dwmac on the T-HEAD TH1520 SoC.

Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
[esmil: rename plat->interface -> plat->mac_interface,
        use devm_stmmac_probe_config_dt()]
Signed-off-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
[drew: change apb registers from syscon to second reg of gmac node]
[drew: convert from stmmac_dvr_probe() to devm_stmmac_pltfr_probe()]
Signed-off-by: Drew Fustini <dfustini@tenstorrent.com>
---
 MAINTAINERS                                       |   1 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig       |  11 +
 drivers/net/ethernet/stmicro/stmmac/Makefile      |   1 +
 drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c | 319 ++++++++++++++++++++++
 4 files changed, 332 insertions(+)

Comments

Andrew Lunn Sept. 26, 2024, 6:32 p.m. UTC | #1
> +static int thead_dwmac_init(struct platform_device *pdev, void *priv)
> +{
> +	struct thead_dwmac *dwmac = priv;
> +	int ret;
> +
> +	ret = thead_dwmac_set_phy_if(dwmac->plat);
> +	if (ret)
> +		return ret;
> +
> +	ret = thead_dwmac_set_txclk_dir(dwmac->plat);
> +	if (ret)
> +		return ret;
> +
> +	ret = regmap_write(dwmac->apb_regmap, GMAC_RXCLK_DELAY_CTRL,
> +			   GMAC_RXCLK_DELAY_VAL(dwmac->rx_delay));
> +	if (ret)
> +		return dev_err_probe(dwmac->dev, ret,
> +				     "failed to set GMAC RX clock delay\n");
> +
> +	ret = regmap_write(dwmac->apb_regmap, GMAC_TXCLK_DELAY_CTRL,
> +			   GMAC_TXCLK_DELAY_VAL(dwmac->tx_delay));
> +	if (ret)
> +		return dev_err_probe(dwmac->dev, ret,
> +				     "failed to set GMAC TX clock delay\n");
> +
> +	thead_dwmac_fix_speed(dwmac, SPEED_1000, 0);

Is this needed? I would expect this to be called when the PHY has link
and you know the link speed. So why set it here?

> +
> +	return thead_dwmac_enable_clk(dwmac->plat);
> +}
> +
> +static int thead_dwmac_probe(struct platform_device *pdev)
> +{
> +	struct device_node *np = pdev->dev.of_node;
> +	struct stmmac_resources stmmac_res;
> +	struct plat_stmmacenet_data *plat;
> +	struct thead_dwmac *dwmac;
> +	void __iomem *apb;
> +	u32 delay;
> +	int ret;
> +
> +	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret,
> +				     "failed to get resources\n");
> +
> +	plat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
> +	if (IS_ERR(plat))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(plat),
> +				     "dt configuration failed\n");
> +
> +	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
> +	if (!dwmac)
> +		return -ENOMEM;
> +
> +	/* hardware default is 0 for the rx and tx internal clock delay */
> +	dwmac->rx_delay = 0;
> +	dwmac->tx_delay = 0;
> +
> +	/* rx and tx internal delay properties are optional */
> +	if (!of_property_read_u32(np, "thead,rx-internal-delay", &delay)) {
> +		if (delay > GMAC_RXCLK_DELAY_MASK)
> +			dev_warn(&pdev->dev,
> +				 "thead,rx-internal-delay (%u) exceeds max (%lu)\n",
> +				 delay, GMAC_RXCLK_DELAY_MASK);
> +		else
> +			dwmac->rx_delay = delay;
> +	}
> +

So you keep going, with an invalid value? It is better to use
dev_err() and return -EINVAL. The DT write will then correct their
error when the device fails to probe.

If you decide to keep this... I'm not sure these properties are
needed.

> +MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");

Please add a second author, if you have taken over this driver.

       Andrew
Drew Fustini Sept. 26, 2024, 6:47 p.m. UTC | #2
On Thu, Sep 26, 2024 at 08:32:00PM +0200, Andrew Lunn wrote:
> > +static int thead_dwmac_init(struct platform_device *pdev, void *priv)
> > +{
> > +	struct thead_dwmac *dwmac = priv;
> > +	int ret;
> > +
> > +	ret = thead_dwmac_set_phy_if(dwmac->plat);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = thead_dwmac_set_txclk_dir(dwmac->plat);
> > +	if (ret)
> > +		return ret;
> > +
> > +	ret = regmap_write(dwmac->apb_regmap, GMAC_RXCLK_DELAY_CTRL,
> > +			   GMAC_RXCLK_DELAY_VAL(dwmac->rx_delay));
> > +	if (ret)
> > +		return dev_err_probe(dwmac->dev, ret,
> > +				     "failed to set GMAC RX clock delay\n");
> > +
> > +	ret = regmap_write(dwmac->apb_regmap, GMAC_TXCLK_DELAY_CTRL,
> > +			   GMAC_TXCLK_DELAY_VAL(dwmac->tx_delay));
> > +	if (ret)
> > +		return dev_err_probe(dwmac->dev, ret,
> > +				     "failed to set GMAC TX clock delay\n");
> > +
> > +	thead_dwmac_fix_speed(dwmac, SPEED_1000, 0);
> 
> Is this needed? I would expect this to be called when the PHY has link
> and you know the link speed. So why set it here?

Good point.  I've removed this line and the probe still completes okay
and the Ethernet connection is working okay.

> > +
> > +	return thead_dwmac_enable_clk(dwmac->plat);
> > +}
> > +
> > +static int thead_dwmac_probe(struct platform_device *pdev)
> > +{
> > +	struct device_node *np = pdev->dev.of_node;
> > +	struct stmmac_resources stmmac_res;
> > +	struct plat_stmmacenet_data *plat;
> > +	struct thead_dwmac *dwmac;
> > +	void __iomem *apb;
> > +	u32 delay;
> > +	int ret;
> > +
> > +	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
> > +	if (ret)
> > +		return dev_err_probe(&pdev->dev, ret,
> > +				     "failed to get resources\n");
> > +
> > +	plat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
> > +	if (IS_ERR(plat))
> > +		return dev_err_probe(&pdev->dev, PTR_ERR(plat),
> > +				     "dt configuration failed\n");
> > +
> > +	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
> > +	if (!dwmac)
> > +		return -ENOMEM;
> > +
> > +	/* hardware default is 0 for the rx and tx internal clock delay */
> > +	dwmac->rx_delay = 0;
> > +	dwmac->tx_delay = 0;
> > +
> > +	/* rx and tx internal delay properties are optional */
> > +	if (!of_property_read_u32(np, "thead,rx-internal-delay", &delay)) {
> > +		if (delay > GMAC_RXCLK_DELAY_MASK)
> > +			dev_warn(&pdev->dev,
> > +				 "thead,rx-internal-delay (%u) exceeds max (%lu)\n",
> > +				 delay, GMAC_RXCLK_DELAY_MASK);
> > +		else
> > +			dwmac->rx_delay = delay;
> > +	}
> > +
> 
> So you keep going, with an invalid value? It is better to use
> dev_err() and return -EINVAL. The DT write will then correct their
> error when the device fails to probe.

My intention was to keep the default of 0 if the dt property exists and
exceeds the max value. I had considered failing the probe but I wasn't
sure that was too severe of a reaction to a bad value for the delay.

> 
> If you decide to keep this... I'm not sure these properties are
> needed.

Given your reply to the cover letter, I think it does make sense for me
to remove handling of these delay properties since the units of the
delay bit field are unknown and the hardware I have is okay with the
default delay.

> 
> > +MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
> 
> Please add a second author, if you have taken over this driver.

Yes, Jisheng is no longer working on it, so I will add myself.

Thanks,
Drew
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index aaa24189de43..54ac52695975 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19944,6 +19944,7 @@  F:	Documentation/devicetree/bindings/net/thead,dwmac.yaml
 F:	Documentation/devicetree/bindings/pinctrl/thead,th1520-pinctrl.yaml
 F:	arch/riscv/boot/dts/thead/
 F:	drivers/clk/thead/clk-th1520-ap.c
+F:	drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
 F:	drivers/pinctrl/pinctrl-th1520.c
 F:	include/dt-bindings/clock/thead,th1520-clk-ap.h
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index 05cc07b8f48c..82030adaf16e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -228,6 +228,17 @@  config DWMAC_SUN8I
 	  stmmac device driver. This driver is used for H3/A83T/A64
 	  EMAC ethernet controller.
 
+config DWMAC_THEAD
+	tristate "T-HEAD dwmac support"
+	depends on OF && (ARCH_THEAD || COMPILE_TEST)
+	select MFD_SYSCON
+	help
+	  Support for ethernet controllers on T-HEAD RISC-V SoCs
+
+	  This selects the T-HEAD platform specific glue layer support for
+	  the stmmac device driver. This driver is used for T-HEAD TH1520
+	  ethernet controller.
+
 config DWMAC_IMX8
 	tristate "NXP IMX8 DWMAC support"
 	default ARCH_MXC
diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile
index c2f0e91f6bf8..d065634c6223 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
@@ -28,6 +28,7 @@  obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
 obj-$(CONFIG_DWMAC_STM32)	+= dwmac-stm32.o
 obj-$(CONFIG_DWMAC_SUNXI)	+= dwmac-sunxi.o
 obj-$(CONFIG_DWMAC_SUN8I)	+= dwmac-sun8i.o
+obj-$(CONFIG_DWMAC_THEAD)	+= dwmac-thead.o
 obj-$(CONFIG_DWMAC_DWC_QOS_ETH)	+= dwmac-dwc-qos-eth.o
 obj-$(CONFIG_DWMAC_INTEL_PLAT)	+= dwmac-intel-plat.o
 obj-$(CONFIG_DWMAC_LOONGSON1)	+= dwmac-loongson1.o
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
new file mode 100644
index 000000000000..9abe8ba323bd
--- /dev/null
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-thead.c
@@ -0,0 +1,319 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * T-HEAD DWMAC platform driver
+ *
+ * Copyright (C) 2021 Alibaba Group Holding Limited.
+ * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org>
+ *
+ */
+
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_net.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "stmmac_platform.h"
+
+#define GMAC_CLK_EN			0x00
+#define  GMAC_TX_CLK_EN			BIT(1)
+#define  GMAC_TX_CLK_N_EN		BIT(2)
+#define  GMAC_TX_CLK_OUT_EN		BIT(3)
+#define  GMAC_RX_CLK_EN			BIT(4)
+#define  GMAC_RX_CLK_N_EN		BIT(5)
+#define  GMAC_EPHY_REF_CLK_EN		BIT(6)
+#define GMAC_RXCLK_DELAY_CTRL		0x04
+#define  GMAC_RXCLK_BYPASS		BIT(15)
+#define  GMAC_RXCLK_INVERT		BIT(14)
+#define  GMAC_RXCLK_DELAY_MASK		GENMASK(4, 0)
+#define  GMAC_RXCLK_DELAY_VAL(x)	FIELD_PREP(GMAC_RXCLK_DELAY_MASK, (x))
+#define GMAC_TXCLK_DELAY_CTRL		0x08
+#define  GMAC_TXCLK_BYPASS		BIT(15)
+#define  GMAC_TXCLK_INVERT		BIT(14)
+#define  GMAC_TXCLK_DELAY_MASK		GENMASK(4, 0)
+#define  GMAC_TXCLK_DELAY_VAL(x)	FIELD_PREP(GMAC_RXCLK_DELAY_MASK, (x))
+#define GMAC_PLLCLK_DIV			0x0c
+#define  GMAC_PLLCLK_DIV_EN		BIT(31)
+#define  GMAC_PLLCLK_DIV_MASK		GENMASK(7, 0)
+#define  GMAC_PLLCLK_DIV_NUM(x)		FIELD_PREP(GMAC_PLLCLK_DIV_MASK, (x))
+#define GMAC_GTXCLK_SEL			0x18
+#define  GMAC_GTXCLK_SEL_PLL		BIT(0)
+#define GMAC_INTF_CTRL			0x1c
+#define  PHY_INTF_MASK			BIT(0)
+#define  PHY_INTF_RGMII			FIELD_PREP(PHY_INTF_MASK, 1)
+#define  PHY_INTF_MII_GMII		FIELD_PREP(PHY_INTF_MASK, 0)
+#define GMAC_TXCLK_OEN			0x20
+#define  TXCLK_DIR_MASK			BIT(0)
+#define  TXCLK_DIR_OUTPUT		FIELD_PREP(TXCLK_DIR_MASK, 0)
+#define  TXCLK_DIR_INPUT		FIELD_PREP(TXCLK_DIR_MASK, 1)
+
+#define GMAC_GMII_RGMII_RATE	125000000
+#define GMAC_MII_RATE		25000000
+
+static const struct regmap_config regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+};
+
+struct thead_dwmac {
+	struct plat_stmmacenet_data *plat;
+	struct regmap *apb_regmap;
+	struct device *dev;
+	u32 rx_delay;
+	u32 tx_delay;
+};
+
+static int thead_dwmac_set_phy_if(struct plat_stmmacenet_data *plat)
+{
+	struct thead_dwmac *dwmac = plat->bsp_priv;
+	u32 phyif;
+
+	switch (plat->mac_interface) {
+	case PHY_INTERFACE_MODE_MII:
+		phyif = PHY_INTF_MII_GMII;
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		phyif = PHY_INTF_RGMII;
+		break;
+	default:
+		dev_err(dwmac->dev, "unsupported phy interface %d\n",
+			plat->mac_interface);
+		return -EINVAL;
+	};
+
+	return regmap_write(dwmac->apb_regmap, GMAC_INTF_CTRL, phyif);
+}
+
+static int thead_dwmac_set_txclk_dir(struct plat_stmmacenet_data *plat)
+{
+	struct thead_dwmac *dwmac = plat->bsp_priv;
+	u32 txclk_dir;
+
+	switch (plat->mac_interface) {
+	case PHY_INTERFACE_MODE_MII:
+		txclk_dir = TXCLK_DIR_INPUT;
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+		txclk_dir = TXCLK_DIR_OUTPUT;
+		break;
+	default:
+		dev_err(dwmac->dev, "unsupported phy interface %d\n",
+			plat->mac_interface);
+		return -EINVAL;
+	};
+
+	return regmap_write(dwmac->apb_regmap, GMAC_TXCLK_OEN, txclk_dir);
+}
+
+static void thead_dwmac_fix_speed(void *priv, unsigned int speed, unsigned int mode)
+{
+	struct plat_stmmacenet_data *plat;
+	struct thead_dwmac *dwmac = priv;
+	unsigned long rate;
+	u32 div;
+
+	plat = dwmac->plat;
+
+	switch (plat->mac_interface) {
+	/* For MII, rxc/txc is provided by phy */
+	case PHY_INTERFACE_MODE_MII:
+		return;
+
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		rate = clk_get_rate(plat->stmmac_clk);
+		if (!rate || rate % GMAC_GMII_RGMII_RATE != 0 ||
+		    rate % GMAC_MII_RATE != 0) {
+			dev_err(dwmac->dev, "invalid gmac rate %ld\n", rate);
+			return;
+		}
+
+		regmap_update_bits(dwmac->apb_regmap, GMAC_PLLCLK_DIV, GMAC_PLLCLK_DIV_EN, 0);
+
+		switch (speed) {
+		case SPEED_1000:
+			div = rate / GMAC_GMII_RGMII_RATE;
+			break;
+		case SPEED_100:
+			div = rate / GMAC_MII_RATE;
+			break;
+		case SPEED_10:
+			div = rate * 10 / GMAC_MII_RATE;
+			break;
+		default:
+			dev_err(dwmac->dev, "invalid speed %u\n", speed);
+			return;
+		}
+		regmap_update_bits(dwmac->apb_regmap, GMAC_PLLCLK_DIV,
+				   GMAC_PLLCLK_DIV_MASK, GMAC_PLLCLK_DIV_NUM(div));
+
+		regmap_update_bits(dwmac->apb_regmap, GMAC_PLLCLK_DIV,
+				   GMAC_PLLCLK_DIV_EN, GMAC_PLLCLK_DIV_EN);
+		break;
+	default:
+		dev_err(dwmac->dev, "unsupported phy interface %d\n",
+			plat->mac_interface);
+		return;
+	}
+}
+
+static int thead_dwmac_enable_clk(struct plat_stmmacenet_data *plat)
+{
+	struct thead_dwmac *dwmac = plat->bsp_priv;
+	int err;
+	u32 reg;
+
+	switch (plat->mac_interface) {
+	case PHY_INTERFACE_MODE_MII:
+		reg = GMAC_RX_CLK_EN | GMAC_TX_CLK_EN;
+		break;
+
+	case PHY_INTERFACE_MODE_RGMII:
+	case PHY_INTERFACE_MODE_RGMII_ID:
+	case PHY_INTERFACE_MODE_RGMII_RXID:
+	case PHY_INTERFACE_MODE_RGMII_TXID:
+		/* use pll */
+		err = regmap_write(dwmac->apb_regmap, GMAC_GTXCLK_SEL, GMAC_GTXCLK_SEL_PLL);
+		if (err)
+			return dev_err_probe(dwmac->dev, err,
+					     "failed to set phy interface\n");
+
+		reg = GMAC_TX_CLK_EN | GMAC_TX_CLK_N_EN | GMAC_TX_CLK_OUT_EN |
+		      GMAC_RX_CLK_EN | GMAC_RX_CLK_N_EN;
+		break;
+
+	default:
+		dev_err(dwmac->dev, "unsupported phy interface %d\n",
+			plat->mac_interface);
+		return -EINVAL;
+	}
+
+	return regmap_write(dwmac->apb_regmap, GMAC_CLK_EN, reg);
+}
+
+static int thead_dwmac_init(struct platform_device *pdev, void *priv)
+{
+	struct thead_dwmac *dwmac = priv;
+	int ret;
+
+	ret = thead_dwmac_set_phy_if(dwmac->plat);
+	if (ret)
+		return ret;
+
+	ret = thead_dwmac_set_txclk_dir(dwmac->plat);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(dwmac->apb_regmap, GMAC_RXCLK_DELAY_CTRL,
+			   GMAC_RXCLK_DELAY_VAL(dwmac->rx_delay));
+	if (ret)
+		return dev_err_probe(dwmac->dev, ret,
+				     "failed to set GMAC RX clock delay\n");
+
+	ret = regmap_write(dwmac->apb_regmap, GMAC_TXCLK_DELAY_CTRL,
+			   GMAC_TXCLK_DELAY_VAL(dwmac->tx_delay));
+	if (ret)
+		return dev_err_probe(dwmac->dev, ret,
+				     "failed to set GMAC TX clock delay\n");
+
+	thead_dwmac_fix_speed(dwmac, SPEED_1000, 0);
+
+	return thead_dwmac_enable_clk(dwmac->plat);
+}
+
+static int thead_dwmac_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct stmmac_resources stmmac_res;
+	struct plat_stmmacenet_data *plat;
+	struct thead_dwmac *dwmac;
+	void __iomem *apb;
+	u32 delay;
+	int ret;
+
+	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret,
+				     "failed to get resources\n");
+
+	plat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
+	if (IS_ERR(plat))
+		return dev_err_probe(&pdev->dev, PTR_ERR(plat),
+				     "dt configuration failed\n");
+
+	dwmac = devm_kzalloc(&pdev->dev, sizeof(*dwmac), GFP_KERNEL);
+	if (!dwmac)
+		return -ENOMEM;
+
+	/* hardware default is 0 for the rx and tx internal clock delay */
+	dwmac->rx_delay = 0;
+	dwmac->tx_delay = 0;
+
+	/* rx and tx internal delay properties are optional */
+	if (!of_property_read_u32(np, "thead,rx-internal-delay", &delay)) {
+		if (delay > GMAC_RXCLK_DELAY_MASK)
+			dev_warn(&pdev->dev,
+				 "thead,rx-internal-delay (%u) exceeds max (%lu)\n",
+				 delay, GMAC_RXCLK_DELAY_MASK);
+		else
+			dwmac->rx_delay = delay;
+	}
+
+	if (!of_property_read_u32(np, "thead,tx-internal-delay", &delay)) {
+		if (delay > GMAC_TXCLK_DELAY_MASK)
+			dev_warn(&pdev->dev,
+				 "thead,tx-internal-delay (%u) exceeds max (%lu)\n",
+				 delay, GMAC_TXCLK_DELAY_MASK);
+		else
+			dwmac->tx_delay = delay;
+	}
+
+	apb = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(apb))
+		return dev_err_probe(&pdev->dev, PTR_ERR(apb),
+				     "Failed to remap gmac apb registers\n");
+
+	dwmac->apb_regmap = devm_regmap_init_mmio(&pdev->dev, apb, &regmap_config);
+	if (IS_ERR(dwmac->apb_regmap))
+		return dev_err_probe(&pdev->dev, PTR_ERR(dwmac->apb_regmap),
+				     "Failed to access gmac apb registers\n");
+
+	dwmac->dev = &pdev->dev;
+	dwmac->plat = plat;
+	plat->bsp_priv = dwmac;
+	plat->fix_mac_speed = thead_dwmac_fix_speed;
+	plat->init = thead_dwmac_init;
+
+	return devm_stmmac_pltfr_probe(pdev, plat, &stmmac_res);
+}
+
+static const struct of_device_id thead_dwmac_match[] = {
+	{ .compatible = "thead,th1520-gmac" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, thead_dwmac_match);
+
+static struct platform_driver thead_dwmac_driver = {
+	.probe = thead_dwmac_probe,
+	.driver = {
+		.name = "thead-dwmac",
+		.pm = &stmmac_pltfr_pm_ops,
+		.of_match_table = thead_dwmac_match,
+	},
+};
+module_platform_driver(thead_dwmac_driver);
+
+MODULE_AUTHOR("Jisheng Zhang <jszhang@kernel.org>");
+MODULE_DESCRIPTION("T-HEAD DWMAC platform driver");
+MODULE_LICENSE("GPL");