| Message ID | 0589448fa41bf7f3e951a75b70226a9873db554f.1728300189.git.andrea.porta@suse.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Add support for RaspberryPi RP1 PCI device using a DT overlay | expand |
On Mon, Oct 07, 2024 at 02:39:45PM +0200, Andrea della Porta wrote: > Add device tree bindings for the gpio/pin/mux controller that is part of > the RP1 multi function device, and relative entries in MAINTAINERS file. > > Signed-off-by: Andrea della Porta <andrea.porta@suse.com> > --- > .../pinctrl/raspberrypi,rp1-gpio.yaml | 169 ++++++++++++++++++ > MAINTAINERS | 2 + > 2 files changed, 171 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml > > diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml > new file mode 100644 > index 000000000000..46e071ec6251 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml > @@ -0,0 +1,169 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule > + > +maintainers: > + - Andrea della Porta <andrea.porta@suse.com> > + > +description: > + The RP1 chipset is a Multi Function Device containing, among other sub-peripherals, > + a gpio/pinconf/mux controller whose 54 pins are grouped into 3 banks. It works also > + as an interrupt controller for those gpios. > + > + Each pin configuration node lists the pin(s) to which it applies, and one or > + more of the mux function to select on those pin(s), and their configuration. > + The pin configuration and multiplexing supports the generic bindings. > + For details on each properties (including the meaning of "pin configuration node"), > + you can refer to ./pinctrl-bindings.txt. Drop the sentence. pinctrl.yaml defines this already. > + > +properties: > + compatible: > + const: raspberrypi,rp1-gpio > + > + reg: > + maxItems: 3 > + description: One reg specifier for each one of the 3 pin banks. > + > + '#gpio-cells': > + description: The first cell is the pin number and the second cell is used > + to specify the flags (see include/dt-bindings/gpio/gpio.h). > + const: 2 > + > + gpio-controller: true > + > + gpio-ranges: > + maxItems: 1 > + > + gpio-line-names: > + maxItems: 54 > + > + interrupts: > + maxItems: 3 > + description: One interrupt specifier for each one of the 3 pin banks. > + > + '#interrupt-cells': > + description: > + Specifies the Bank number [0, 1, 2] and Flags as defined in > + include/dt-bindings/interrupt-controller/irq.h. > + const: 2 > + > + interrupt-controller: true > + > +additionalProperties: > + anyOf: Uh, no, I think you got comments on this. You should be specific which nodes you expect, e.g. pins or groups. See other recent bindings for example. > + - type: object > + additionalProperties: false > + allOf: > + - $ref: pincfg-node.yaml# > + - $ref: pinmux-node.yaml# > + > + description: > + Pin controller client devices use pin configuration subnodes (children > + and grandchildren) for desired pin configuration. > + Client device subnodes use below standard properties. > + > + properties: > + pins: > + description: > + A string (or list of strings) adhering to the pattern "gpio[0-5][0-9]" > + function: true > + bias-disable: true > + bias-pull-down: true > + bias-pull-up: true > + slew-rate: > + description: 0 is slow slew rate, 1 is fast slew rate > + enum: [ 0, 1 ] > + drive-strength: > + enum: [ 2, 4, 8, 12 ] > + > + - type: object > + additionalProperties: > + $ref: "#/additionalProperties/anyOf/0" I don't quite get what you wanted to achieve here. > + > +allOf: > + - $ref: pinctrl.yaml# > + > +required: > + - reg > + - compatible > + - "#gpio-cells" > + - gpio-controller > + - interrupts > + - "#interrupt-cells" > + - interrupt-controller > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + > + rp1 { > + #address-cells = <2>; > + #size-cells = <2>; > + > + rp1_gpio: pinctrl@c0400d0000 { > + reg = <0xc0 0x400d0000 0x0 0xc000>, > + <0xc0 0x400e0000 0x0 0xc000>, > + <0xc0 0x400f0000 0x0 0xc000>; > + compatible = "raspberrypi,rp1-gpio"; > + gpio-controller; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, > + <1 IRQ_TYPE_LEVEL_HIGH>, > + <2 IRQ_TYPE_LEVEL_HIGH>; > + gpio-line-names = > + "ID_SDA", // GPIO0 > + "ID_SCL", // GPIO1 > + "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", > + "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11", > + "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16", > + "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21", > + "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26", > + "GPIO27", > + "PCIE_RP1_WAKE", // GPIO28 > + "FAN_TACH", // GPIO29 > + "HOST_SDA", // GPIO30 > + "HOST_SCL", // GPIO31 > + "ETH_RST_N", // GPIO32 > + "", // GPIO33 > + "CD0_IO0_MICCLK", // GPIO34 > + "CD0_IO0_MICDAT0", // GPIO35 > + "RP1_PCIE_CLKREQ_N", // GPIO36 > + "", // GPIO37 > + "CD0_SDA", // GPIO38 > + "CD0_SCL", // GPIO39 > + "CD1_SDA", // GPIO40 > + "CD1_SCL", // GPIO41 > + "USB_VBUS_EN", // GPIO42 > + "USB_OC_N", // GPIO43 > + "RP1_STAT_LED", // GPIO44 > + "FAN_PWM", // GPIO45 > + "CD1_IO0_MICCLK", // GPIO46 > + "2712_WAKE", // GPIO47 > + "CD1_IO1_MICDAT1", // GPIO48 > + "EN_MAX_USB_CUR", // GPIO49 > + "", // GPIO50 > + "", // GPIO51 > + "", // GPIO52 > + ""; // GPIO53 > + > + rp1_uart0_14_15: rp1_uart0_14_15 { Underscores are not allowed in node names. Please read DTS coding style. Drop unused labels. > + pin_txd { > + function = "uart0"; > + pins = "gpio14"; > + bias-disable; > + }; Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml new file mode 100644 index 000000000000..46e071ec6251 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule + +maintainers: + - Andrea della Porta <andrea.porta@suse.com> + +description: + The RP1 chipset is a Multi Function Device containing, among other sub-peripherals, + a gpio/pinconf/mux controller whose 54 pins are grouped into 3 banks. It works also + as an interrupt controller for those gpios. + + Each pin configuration node lists the pin(s) to which it applies, and one or + more of the mux function to select on those pin(s), and their configuration. + The pin configuration and multiplexing supports the generic bindings. + For details on each properties (including the meaning of "pin configuration node"), + you can refer to ./pinctrl-bindings.txt. + +properties: + compatible: + const: raspberrypi,rp1-gpio + + reg: + maxItems: 3 + description: One reg specifier for each one of the 3 pin banks. + + '#gpio-cells': + description: The first cell is the pin number and the second cell is used + to specify the flags (see include/dt-bindings/gpio/gpio.h). + const: 2 + + gpio-controller: true + + gpio-ranges: + maxItems: 1 + + gpio-line-names: + maxItems: 54 + + interrupts: + maxItems: 3 + description: One interrupt specifier for each one of the 3 pin banks. + + '#interrupt-cells': + description: + Specifies the Bank number [0, 1, 2] and Flags as defined in + include/dt-bindings/interrupt-controller/irq.h. + const: 2 + + interrupt-controller: true + +additionalProperties: + anyOf: + - type: object + additionalProperties: false + allOf: + - $ref: pincfg-node.yaml# + - $ref: pinmux-node.yaml# + + description: + Pin controller client devices use pin configuration subnodes (children + and grandchildren) for desired pin configuration. + Client device subnodes use below standard properties. + + properties: + pins: + description: + A string (or list of strings) adhering to the pattern "gpio[0-5][0-9]" + function: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + slew-rate: + description: 0 is slow slew rate, 1 is fast slew rate + enum: [ 0, 1 ] + drive-strength: + enum: [ 2, 4, 8, 12 ] + + - type: object + additionalProperties: + $ref: "#/additionalProperties/anyOf/0" + +allOf: + - $ref: pinctrl.yaml# + +required: + - reg + - compatible + - "#gpio-cells" + - gpio-controller + - interrupts + - "#interrupt-cells" + - interrupt-controller + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + rp1 { + #address-cells = <2>; + #size-cells = <2>; + + rp1_gpio: pinctrl@c0400d0000 { + reg = <0xc0 0x400d0000 0x0 0xc000>, + <0xc0 0x400e0000 0x0 0xc000>, + <0xc0 0x400f0000 0x0 0xc000>; + compatible = "raspberrypi,rp1-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 IRQ_TYPE_LEVEL_HIGH>, + <1 IRQ_TYPE_LEVEL_HIGH>, + <2 IRQ_TYPE_LEVEL_HIGH>; + gpio-line-names = + "ID_SDA", // GPIO0 + "ID_SCL", // GPIO1 + "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", + "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11", + "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16", + "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21", + "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26", + "GPIO27", + "PCIE_RP1_WAKE", // GPIO28 + "FAN_TACH", // GPIO29 + "HOST_SDA", // GPIO30 + "HOST_SCL", // GPIO31 + "ETH_RST_N", // GPIO32 + "", // GPIO33 + "CD0_IO0_MICCLK", // GPIO34 + "CD0_IO0_MICDAT0", // GPIO35 + "RP1_PCIE_CLKREQ_N", // GPIO36 + "", // GPIO37 + "CD0_SDA", // GPIO38 + "CD0_SCL", // GPIO39 + "CD1_SDA", // GPIO40 + "CD1_SCL", // GPIO41 + "USB_VBUS_EN", // GPIO42 + "USB_OC_N", // GPIO43 + "RP1_STAT_LED", // GPIO44 + "FAN_PWM", // GPIO45 + "CD1_IO0_MICCLK", // GPIO46 + "2712_WAKE", // GPIO47 + "CD1_IO1_MICDAT1", // GPIO48 + "EN_MAX_USB_CUR", // GPIO49 + "", // GPIO50 + "", // GPIO51 + "", // GPIO52 + ""; // GPIO53 + + rp1_uart0_14_15: rp1_uart0_14_15 { + pin_txd { + function = "uart0"; + pins = "gpio14"; + bias-disable; + }; + + pin_rxd { + function = "uart0"; + pins = "gpio15"; + bias-pull-up; + }; + }; + }; + }; diff --git a/MAINTAINERS b/MAINTAINERS index 75a66e3e34c9..c55d12550246 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19384,7 +19384,9 @@ RASPBERRY PI RP1 PCI DRIVER M: Andrea della Porta <andrea.porta@suse.com> S: Maintained F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml +F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml F: include/dt-bindings/clock/rp1.h +F: include/dt-bindings/misc/rp1.h RC-CORE / LIRC FRAMEWORK M: Sean Young <sean@mess.org>
Add device tree bindings for the gpio/pin/mux controller that is part of the RP1 multi function device, and relative entries in MAINTAINERS file. Signed-off-by: Andrea della Porta <andrea.porta@suse.com> --- .../pinctrl/raspberrypi,rp1-gpio.yaml | 169 ++++++++++++++++++ MAINTAINERS | 2 + 2 files changed, 171 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml