diff mbox series

[v3,06/15] PCI/AER: Change AER driver to read UCE fatal status for all CXL PCIe port devices

Message ID 20241113215429.3177981-7-terry.bowman@amd.com (mailing list archive)
State New
Headers show
Series Enable CXL PCIe port protocol error handling and logging | expand

Commit Message

Bowman, Terry Nov. 13, 2024, 9:54 p.m. UTC
The AER service driver's aer_get_device_error_info() function doesn't read
uncorrectable (UCE) fatal error status from PCIe upstream port devices,
including CXL upstream switch ports. As a result, fatal errors are not
logged or handled as needed for CXL PCIe upstream switch port devices.

Update the aer_get_device_error_info() function to read the UCE fatal
status for all CXL PCIe port devices. Make the change to not affect
non-CXL PCIe devices.

The fatal error status will be used in future patches implementing
CXL PCIe port uncorrectable error handling and logging.

Signed-off-by: Terry Bowman <terry.bowman@amd.com>
---
 drivers/pci/pcie/aer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Lukas Wunner Nov. 15, 2024, 9:35 a.m. UTC | #1
On Wed, Nov 13, 2024 at 03:54:20PM -0600, Terry Bowman wrote:
> The AER service driver's aer_get_device_error_info() function doesn't read
> uncorrectable (UCE) fatal error status from PCIe upstream port devices,
> including CXL upstream switch ports. As a result, fatal errors are not
> logged or handled as needed for CXL PCIe upstream switch port devices.
> 
> Update the aer_get_device_error_info() function to read the UCE fatal
> status for all CXL PCIe port devices. Make the change to not affect
> non-CXL PCIe devices.
> 
> The fatal error status will be used in future patches implementing
> CXL PCIe port uncorrectable error handling and logging.
[...]
> --- a/drivers/pci/pcie/aer.c
> +++ b/drivers/pci/pcie/aer.c
> @@ -1250,7 +1250,8 @@ int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
>  	} else if (type == PCI_EXP_TYPE_ROOT_PORT ||
>  		   type == PCI_EXP_TYPE_RC_EC ||
>  		   type == PCI_EXP_TYPE_DOWNSTREAM ||
> -		   info->severity == AER_NONFATAL) {
> +		   info->severity == AER_NONFATAL ||
> +		   (pcie_is_cxl(dev) && type == PCI_EXP_TYPE_UPSTREAM)) {
>  
>  		/* Link is still healthy for IO reads */
>  		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS,

Just a heads-up, there's another patch pending by Shuai Xue (+cc)
which touches the same code lines.  It re-enables error reporting
for PCIe Upstream Ports (as well as Endpoints) under certain
conditions:

https://lore.kernel.org/all/20241112135419.59491-3-xueshuai@linux.alibaba.com/

That was originally disabled by Keith Busch (+cc) with commit
9d938ea53b26 ("PCI/AER: Don't read upstream ports below fatal errors").

There's some merge conflict potential here if your series goes into
the cxl tree and Shuai's patch into the pci tree in the next cycle.

Thanks,

Lukas
diff mbox series

Patch

diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index 1d3e5b929661..bb34e205e082 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1250,7 +1250,8 @@  int aer_get_device_error_info(struct pci_dev *dev, struct aer_err_info *info)
 	} else if (type == PCI_EXP_TYPE_ROOT_PORT ||
 		   type == PCI_EXP_TYPE_RC_EC ||
 		   type == PCI_EXP_TYPE_DOWNSTREAM ||
-		   info->severity == AER_NONFATAL) {
+		   info->severity == AER_NONFATAL ||
+		   (pcie_is_cxl(dev) && type == PCI_EXP_TYPE_UPSTREAM)) {
 
 		/* Link is still healthy for IO reads */
 		pci_read_config_dword(dev, aer + PCI_ERR_UNCOR_STATUS,