@@ -13379,6 +13379,13 @@ S: Maintained
F: Documentation/devicetree/bindings/hwinfo/loongson,ls2k-chipid.yaml
F: drivers/soc/loongson/loongson2_guts.c
+LOONGSON SECURITY MODULE DRIVER
+M: Qunqin Zhao <zhaoqunqin@loongson.cn>
+L: loongarch@lists.linux.dev
+S: Maintained
+F: drivers/soc/loongson/loongson_se.c
+F: include/soc/loongson/se.h
+
LOONGSON-2 SOC SERIES PM DRIVER
M: Yinbo Zhu <zhuyinbo@loongson.cn>
L: linux-pm@vger.kernel.org
@@ -27,3 +27,12 @@ config LOONGSON2_PM
Disk), ACPI S5 (Soft Shutdown) and supports multiple wake-up methods
(USB, GMAC, PWRBTN, etc.). This driver was to add power management
controller support that base on dts for Loongson-2 series SoCs.
+
+config LOONGSON_SE
+ tristate "LOONGSON SECURITY MODULE Interface"
+ depends on LOONGARCH && ACPI
+ help
+ The Loongson security module provides the control for hardware
+ encryption acceleration devices. Each device uses at least one
+ channel to interacts with security module, and each channel may
+ has its own buffer provided by security module.
@@ -5,3 +5,4 @@
obj-$(CONFIG_LOONGSON2_GUTS) += loongson2_guts.o
obj-$(CONFIG_LOONGSON2_PM) += loongson2_pm.o
+obj-$(CONFIG_LOONGSON_SE) += loongson_se.o
new file mode 100644
@@ -0,0 +1,542 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2024 Loongson Technology Corporation Limited
+ */
+
+#include <linux/acpi.h>
+#include <linux/cdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <soc/loongson/se.h>
+
+/*
+ * The Loongson Security Module provides the control for hardware
+ * encryption acceleration child devices. The SE framework is
+ * shown as follows:
+ *
+ * +------------+
+ * | CPU |
+ * +------------+
+ * ^ ^
+ * DMA | | IRQ
+ * v v
+ * +-----------------------------------+
+ * | Loongson Security Module |
+ * +-----------------------------------+
+ * ^ ^
+ * chnnel0 | channel1 |
+ * v v
+ * +-----------+ +----------+
+ * | sub-dev0 | | sub-dev1 | ..... Max sub-dev31
+ * +-----------+ +----------+
+ *
+ * The CPU cannot directly communicate with SE's sub devices,
+ * but sends commands to SE, which processes the commands and
+ * sends them to the corresponding sub devices.
+ */
+
+static inline u32 se_readl(struct loongson_se *se, u32 off)
+{
+ return readl(se->base + off);
+}
+
+static inline void se_writel(struct loongson_se *se, u32 val, u32 off)
+{
+ writel(val, se->base + off);
+}
+
+static inline bool se_ch_status(struct loongson_se *se, u32 int_bit)
+{
+ return !!(se->ch_status & int_bit);
+}
+
+static void se_enable_int(struct loongson_se *se, u32 int_bit)
+{
+ unsigned long flag;
+ u32 tmp;
+
+ if (!int_bit)
+ return;
+
+ spin_lock_irqsave(&se->dev_lock, flag);
+
+ tmp = se_readl(se, SE_S2LINT_EN);
+ tmp |= int_bit;
+ se_writel(se, tmp, SE_S2LINT_EN);
+
+ spin_unlock_irqrestore(&se->dev_lock, flag);
+}
+
+static void se_disable_int(struct loongson_se *se, u32 int_bit)
+{
+ unsigned long flag;
+ u32 tmp;
+
+ if (!int_bit)
+ return;
+
+ spin_lock_irqsave(&se->dev_lock, flag);
+
+ tmp = se_readl(se, SE_S2LINT_EN);
+ tmp &= ~(int_bit);
+ se_writel(se, tmp, SE_S2LINT_EN);
+
+ spin_unlock_irqrestore(&se->dev_lock, flag);
+}
+
+static int se_send_requeset(struct loongson_se *se, struct se_data *req)
+{
+ unsigned long flag;
+ u32 status;
+ int err = 0;
+ int i;
+
+ if (!se || !req)
+ return -EINVAL;
+
+ if (se_readl(se, SE_L2SINT_STAT) ||
+ !(se_readl(se, SE_L2SINT_EN) & req->int_bit))
+ return -EBUSY;
+
+ spin_lock_irqsave(&se->cmd_lock, flag);
+
+ for (i = 0; i < ARRAY_SIZE(req->u.data); i++)
+ se_writel(se, req->u.data[i], SE_MAILBOX_S + i * 4);
+ se_writel(se, req->int_bit, SE_L2SINT_SET);
+ err = readl_relaxed_poll_timeout_atomic(se->base + SE_L2SINT_STAT, status,
+ !(status & req->int_bit), 10, 10000);
+
+ spin_unlock_irqrestore(&se->cmd_lock, flag);
+
+ return err;
+}
+
+static int se_get_response(struct loongson_se *se, struct se_data *res)
+{
+ unsigned long flag;
+ int i;
+
+ if (!se || !res)
+ return -EINVAL;
+
+ if ((se_readl(se, SE_S2LINT_STAT) & res->int_bit) == 0)
+ return -EBUSY;
+
+ spin_lock_irqsave(&se->cmd_lock, flag);
+
+ for (i = 0; i < ARRAY_SIZE(res->u.data); i++)
+ res->u.data[i] = se_readl(se, SE_MAILBOX_L + i * 4);
+ se_writel(se, res->int_bit, SE_S2LINT_CL);
+
+ spin_unlock_irqrestore(&se->cmd_lock, flag);
+
+ return 0;
+}
+
+static int loongson_se_get_res(struct loongson_se *se, u32 int_bit, u32 cmd,
+ struct se_data *res)
+{
+ int err = 0;
+
+ res->int_bit = int_bit;
+
+ if (se_get_response(se, res)) {
+ dev_err(se->dev, "Int 0x%x get response fail.\n", int_bit);
+ return -EFAULT;
+ }
+
+ /* Check response */
+ if (res->u.res.cmd == cmd)
+ err = 0;
+ else {
+ dev_err(se->dev, "Response cmd is 0x%x, not expect cmd 0x%x.\n",
+ res->u.res.cmd, cmd);
+ err = -EFAULT;
+ }
+
+ return err;
+}
+
+static int se_send_genl_cmd(struct loongson_se *se, struct se_data *req,
+ struct se_data *res, int retry)
+{
+ int err = 0, cnt = 0;
+
+try_again:
+ if (cnt++ >= retry) {
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ dev_dbg(se->dev, "%d time send cmd 0x%x\n", cnt, req->u.gcmd.cmd);
+
+ err = se_send_requeset(se, req);
+ if (err)
+ goto try_again;
+
+ if (!wait_for_completion_timeout(&se->cmd_completion, HZ)) {
+ se_enable_int(se, req->int_bit);
+ goto try_again;
+ }
+ err = loongson_se_get_res(se, req->int_bit, req->u.gcmd.cmd, res);
+ if (err || res->u.res.cmd_ret) {
+ se_enable_int(se, req->int_bit);
+ goto try_again;
+ }
+
+out:
+ se_enable_int(se, req->int_bit);
+
+ return err;
+}
+
+static int loongson_se_set_msg(struct lsse_ch *ch)
+{
+ struct loongson_se *se = ch->se;
+ struct se_data req = {0};
+ struct se_data res = {0};
+ int err;
+
+ req.int_bit = SE_INT_SETUP;
+ req.u.gcmd.cmd = SE_CMD_SETMSG;
+ /* MSG off */
+ req.u.gcmd.info[0] = ch->id;
+ req.u.gcmd.info[1] = ch->smsg - se->mem_base;
+ req.u.gcmd.info[2] = ch->msg_size;
+
+ dev_dbg(se->dev, "Set Channel %d msg off 0x%x, msg size %d\n",
+ ch->id, req.u.gcmd.info[1], req.u.gcmd.info[2]);
+
+ err = se_send_genl_cmd(se, &req, &res, 5);
+ if (res.u.res.cmd_ret)
+ return res.u.res.cmd_ret;
+
+ return err;
+}
+
+static irqreturn_t se_irq(int irq, void *dev_id)
+{
+ struct loongson_se *se = (struct loongson_se *)dev_id;
+ struct lsse_ch *ch;
+ u32 int_status;
+
+ int_status = se_readl(se, SE_S2LINT_STAT);
+
+ dev_dbg(se->dev, "%s int status is 0x%x\n", __func__, int_status);
+
+ se_disable_int(se, int_status);
+
+ if (int_status & SE_INT_SETUP) {
+ complete(&se->cmd_completion);
+ int_status &= ~SE_INT_SETUP;
+ }
+
+ while (int_status) {
+ int id = __ffs(int_status);
+
+ ch = &se->chs[id];
+ if (ch->complete)
+ ch->complete(ch);
+ int_status &= ~BIT(id);
+ se_writel(se, BIT(id), SE_S2LINT_CL);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int se_init_hw(struct loongson_se *se, dma_addr_t addr, int size)
+{
+ struct se_data req;
+ struct se_data res;
+ int err, retry = 5;
+
+ se_enable_int(se, SE_INT_SETUP);
+
+ /* Start engine */
+ memset(&req, 0, sizeof(struct se_data));
+ memset(&res, 0, sizeof(struct se_data));
+ req.int_bit = SE_INT_SETUP;
+ req.u.gcmd.cmd = SE_CMD_START;
+ err = se_send_genl_cmd(se, &req, &res, retry);
+ if (err)
+ return err;
+
+ /* Get Version */
+ memset(&req, 0, sizeof(struct se_data));
+ memset(&res, 0, sizeof(struct se_data));
+ req.int_bit = SE_INT_SETUP;
+ req.u.gcmd.cmd = SE_CMD_GETVER;
+ err = se_send_genl_cmd(se, &req, &res, retry);
+ if (err)
+ return err;
+ se->version = res.u.res.info[0];
+
+ /* Set shared mem */
+ memset(&req, 0, sizeof(struct se_data));
+ memset(&res, 0, sizeof(struct se_data));
+ req.int_bit = SE_INT_SETUP;
+ req.u.gcmd.cmd = SE_CMD_SETBUF;
+ /* MMAP */
+ req.u.gcmd.info[0] = addr & 0xffffffff;
+ req.u.gcmd.info[1] = addr >> 32;
+ /* MASK */
+ req.u.gcmd.info[2] = ~(size - 1);
+ req.u.gcmd.info[3] = 0xffffffff;
+ err = se_send_genl_cmd(se, &req, &res, retry);
+ if (err)
+ return err;
+ pr_debug("Set win mmap 0x%llx, mask 0x%llx\n",
+ ((u64)req.u.gcmd.info[1] << 32) | req.u.gcmd.info[0],
+ ((u64)req.u.gcmd.info[3] << 32) | req.u.gcmd.info[2]);
+
+ return err;
+}
+
+static void se_disable_hw(struct loongson_se *se)
+{
+ struct se_data req = {0};
+ struct se_data res = {0};
+
+ /* Stop engine */
+ req.int_bit = SE_INT_SETUP;
+ req.u.gcmd.cmd = SE_CMD_STOP;
+ se_send_genl_cmd(se, &req, &res, 5);
+ se_disable_int(se, SE_INT_ALL);
+}
+
+/*
+ * Called by SE's child device driver.
+ */
+int se_send_ch_requeset(struct lsse_ch *ch)
+{
+ struct loongson_se *se;
+ u32 status, int_bit;
+ int err = 0;
+
+ if (!ch)
+ return -EINVAL;
+
+ se = ch->se;
+ int_bit = ch->int_bit;
+
+ if ((se_readl(se, SE_L2SINT_STAT) & int_bit) ||
+ !(se_readl(se, SE_L2SINT_EN) & int_bit))
+ return -EBUSY;
+
+ se_enable_int(se, int_bit);
+ se_writel(se, int_bit, SE_L2SINT_SET);
+
+ err = readl_relaxed_poll_timeout_atomic(se->base + SE_L2SINT_STAT, status,
+ !(status & int_bit), 10, 10000);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(se_send_ch_requeset);
+
+/*
+ * se_init_ch() - Init the channel used by child device.
+ *
+ * Allocate the shared memory agreed upon with SE on SE probe,
+ * and register the callback function when the data processing
+ * in this channel is completed.
+ */
+struct lsse_ch *se_init_ch(struct device *dev, int id, int data_size, int msg_size,
+ void *priv, void (*complete)(struct lsse_ch *se_ch))
+{
+ struct loongson_se *se = dev_get_drvdata(dev);
+ struct lsse_ch *ch;
+ unsigned long flag;
+ int data_first, data_nr;
+ int msg_first, msg_nr;
+
+ if (!se) {
+ pr_err("SE has bot been initialized\n");
+ return NULL;
+ }
+
+ if (id == 0 || id > SE_CH_MAX) {
+ dev_err(se->dev, "Channel number %d is invalid\n", id);
+ return NULL;
+ }
+
+ if (se_ch_status(se, BIT(id))) {
+ dev_err(se->dev, "Channel number %d has been initialized\n", id);
+ return NULL;
+ }
+
+ spin_lock_irqsave(&se->dev_lock, flag);
+
+ ch = &se->chs[id];
+ ch->se = se;
+ ch->id = id;
+ ch->int_bit = BIT(id);
+ se->ch_status |= BIT(id);
+
+ data_nr = round_up(data_size, PAGE_SIZE) / PAGE_SIZE;
+ data_first = bitmap_find_next_zero_area(se->mem_map, se->mem_map_pages,
+ 0, data_nr, 0);
+ if (data_first >= se->mem_map_pages) {
+ dev_err(se->dev, "Insufficient memory space\n");
+ spin_unlock_irqrestore(&se->dev_lock, flag);
+ return NULL;
+ }
+
+ bitmap_set(se->mem_map, data_first, data_nr);
+ ch->data_buffer = se->mem_base + data_first * PAGE_SIZE;
+ ch->data_addr = se->mem_addr + data_first * PAGE_SIZE;
+ ch->data_size = data_size;
+
+ msg_nr = round_up(msg_size, PAGE_SIZE) / PAGE_SIZE;
+ msg_first = bitmap_find_next_zero_area(se->mem_map, se->mem_map_pages,
+ 0, msg_nr, 0);
+ if (msg_first >= se->mem_map_pages) {
+ dev_err(se->dev, "Insufficient memory space\n");
+ bitmap_clear(se->mem_map, data_first, data_nr);
+ spin_unlock_irqrestore(&se->dev_lock, flag);
+ return NULL;
+ }
+
+ bitmap_set(se->mem_map, msg_first, msg_nr);
+ ch->smsg = se->mem_base + msg_first * PAGE_SIZE;
+ ch->rmsg = ch->smsg + msg_size / 2;
+ ch->msg_size = msg_size;
+ ch->complete = complete;
+ ch->priv = priv;
+ spin_lock_init(&ch->ch_lock);
+
+ spin_unlock_irqrestore(&se->dev_lock, flag);
+
+ if (loongson_se_set_msg(ch)) {
+ dev_err(se->dev, "Channel %d setup message address failed\n", id);
+ return NULL;
+ }
+
+ se_enable_int(se, ch->int_bit);
+
+ return ch;
+}
+EXPORT_SYMBOL_GPL(se_init_ch);
+
+void se_deinit_ch(struct lsse_ch *ch)
+{
+ struct loongson_se *se = ch->se;
+ unsigned long flag;
+ int first, nr;
+ int id = ch->id;
+
+ if (!se) {
+ pr_err("SE has bot been initialized\n");
+ return;
+ }
+
+ if (id == 0 || id > SE_CH_MAX) {
+ dev_err(se->dev, "Channel number %d is invalid\n", id);
+ return;
+ }
+
+ if (!se_ch_status(se, BIT(id))) {
+ dev_err(se->dev, "Channel number %d has not been initialized\n", id);
+ return;
+ }
+
+ spin_lock_irqsave(&se->dev_lock, flag);
+
+ se->ch_status &= ~BIT(ch->id);
+
+ first = (ch->data_buffer - se->mem_base) / PAGE_SIZE;
+ nr = round_up(ch->data_size, PAGE_SIZE) / PAGE_SIZE;
+ bitmap_clear(se->mem_map, first, nr);
+
+ first = (ch->smsg - se->mem_base) / PAGE_SIZE;
+ nr = round_up(ch->msg_size, PAGE_SIZE) / PAGE_SIZE;
+ bitmap_clear(se->mem_map, first, nr);
+
+ se_disable_int(se, ch->int_bit);
+
+ spin_unlock_irqrestore(&se->dev_lock, flag);
+
+}
+EXPORT_SYMBOL_GPL(se_deinit_ch);
+
+static int loongson_se_probe(struct platform_device *pdev)
+{
+ struct loongson_se *se;
+ struct device *dev = &pdev->dev;
+ int nr_irq, irq, err, size;
+
+ se = devm_kmalloc(dev, sizeof(*se), GFP_KERNEL);
+ if (!se)
+ return -ENOMEM;
+ se->dev = dev;
+ dev_set_drvdata(dev, se);
+ init_completion(&se->cmd_completion);
+ spin_lock_init(&se->cmd_lock);
+ spin_lock_init(&se->dev_lock);
+ /* Setup DMA buffer */
+ dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (device_property_read_u32(dev, "dmam_size", &size))
+ return -ENODEV;
+ size = roundup_pow_of_two(size);
+ se->mem_base = dmam_alloc_coherent(dev, size, &se->mem_addr, GFP_KERNEL);
+ if (!se->mem_base)
+ return -ENOMEM;
+ memset(se->mem_base, 0, size);
+ se->mem_map_pages = size / PAGE_SIZE;
+ se->mem_map = devm_bitmap_zalloc(dev, se->mem_map_pages, GFP_KERNEL);
+ if (!se->mem_map)
+ return -ENOMEM;
+
+ se->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(se->base))
+ return PTR_ERR(se->base);
+
+ nr_irq = platform_irq_count(pdev);
+ if (nr_irq <= 0)
+ return -ENODEV;
+ while (nr_irq) {
+ irq = platform_get_irq(pdev, --nr_irq);
+ if (irq < 0)
+ return -ENODEV;
+ /* Use the same interrupt handler address.
+ * Determine which irq it is accroding
+ * SE_S2LINT_STAT register.
+ */
+ err = devm_request_irq(dev, irq, se_irq, 0,
+ "loongson-se", se);
+ if (err)
+ dev_err(dev, "failed to request irq: %d\n", err);
+ }
+
+ err = se_init_hw(se, se->mem_addr, size);
+ if (err)
+ se_disable_hw(se);
+
+ return err;
+}
+
+static struct acpi_device_id loongson_se_acpi_match[] = {
+ {"LOON0011", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(acpi, loongson_se_acpi_match);
+
+static struct platform_driver loongson_se_driver = {
+ .probe = loongson_se_probe,
+ .driver = {
+ .name = "loongson-se",
+ .acpi_match_table = loongson_se_acpi_match,
+ },
+};
+module_platform_driver(loongson_se_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Loongson Technology Corporation");
+MODULE_DESCRIPTION("Loongson Security Module driver");
new file mode 100644
@@ -0,0 +1,135 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Copyright (C) 2024 Loongson Technology Corporation Limited */
+
+#ifndef __LOONGSON_SE_H__
+#define __LOONGSON_SE_H__
+
+#define SE_MAILBOX_S 0x0
+#define SE_MAILBOX_L 0x20
+#define SE_S2LINT_STAT 0x88
+#define SE_S2LINT_EN 0x8c
+#define SE_S2LINT_SET 0x90
+#define SE_S2LINT_CL 0x94
+#define SE_L2SINT_STAT 0x98
+#define SE_L2SINT_EN 0x9c
+#define SE_L2SINT_SET 0xa0
+#define SE_L2SINT_CL 0xa4
+
+/* INT bit definition */
+#define SE_INT_SETUP BIT(0)
+#define SE_INT_SM2 BIT(0)
+#define SE_INT_SM3 BIT(0)
+#define SE_INT_SM4 BIT(0)
+#define SE_INT_RNG BIT(0)
+#define SE_INT_TPM BIT(5)
+#define SE_INT_ALL 0xffffffff
+
+#define SE_CMD_START 0x0
+#define SE_CMD_STOP 0x1
+#define SE_CMD_GETVER 0x2
+#define SE_CMD_SETBUF 0x3
+#define SE_CMD_SETMSG 0x4
+
+#define SE_CMD_RNG 0x100
+
+#define SE_CMD_SM2_SIGN 0x200
+#define SE_CMD_SM2_VSIGN 0x201
+
+#define SE_CMD_SM3_DIGEST 0x300
+#define SE_CMD_SM3_UPDATE 0x301
+#define SE_CMD_SM3_FINISH 0x302
+
+#define SE_CMD_SM4_ECB_ENCRY 0x400
+#define SE_CMD_SM4_ECB_DECRY 0x401
+#define SE_CMD_SM4_CBC_ENCRY 0x402
+#define SE_CMD_SM4_CBC_DECRY 0x403
+#define SE_CMD_SM4_CTR 0x404
+
+#define SE_CMD_TPM 0x500
+#define SE_CMD_ZUC_INIT_READ 0x600
+#define SE_CMD_ZUC_READ 0x601
+
+#define SE_CMD_SDF 0x700
+
+#define SE_CH_MAX 32
+
+#define SE_CH_RNG 1
+#define SE_CH_SM2 2
+#define SE_CH_SM3 3
+#define SE_CH_SM4 4
+#define SE_CH_TPM 5
+#define SE_CH_ZUC 6
+#define SE_CH_SDF 7
+
+struct se_msg {
+ u32 cmd;
+ u32 data_off;
+ u32 data_len;
+ u32 info[5];
+};
+
+struct se_cmd {
+ u32 cmd;
+ u32 info[7];
+};
+
+struct se_res {
+ u32 cmd;
+ u32 cmd_ret;
+ u32 info[6];
+};
+
+struct se_data {
+ u32 int_bit;
+ union {
+ u32 data[8];
+ struct se_cmd gcmd;
+ struct se_res res;
+ } u;
+};
+
+struct lsse_ch {
+ u32 id;
+ u32 int_bit;
+ struct loongson_se *se;
+ void *priv;
+ spinlock_t ch_lock;
+ void *smsg;
+ void *rmsg;
+ int msg_size;
+ void *data_buffer;
+ dma_addr_t data_addr;
+ int data_size;
+
+ void (*complete)(struct lsse_ch *se_ch);
+};
+
+struct loongson_se {
+ struct device *dev;
+ void __iomem *base;
+ u32 version;
+ u32 ch_status;
+ spinlock_t cmd_lock;
+ spinlock_t dev_lock;
+
+ /* Interaction memory */
+ void *mem_base;
+ dma_addr_t mem_addr;
+ unsigned long *mem_map;
+ int mem_map_pages;
+ void *smsg;
+ void *rmsg;
+
+ /* Synchronous CMD */
+ struct completion cmd_completion;
+
+ /* Channel */
+ struct lsse_ch chs[SE_CH_MAX];
+};
+
+struct lsse_ch *se_init_ch(struct device *dev, int id, int data_size, int msg_size,
+ void *priv, void (*complete)(struct lsse_ch *se_ch));
+void se_deinit_ch(struct lsse_ch *ch);
+int se_send_ch_requeset(struct lsse_ch *ch);
+
+#endif
This driver supports Loongson Security Module, which provides the control for it's hardware encryption acceleration child devices. Only ACPI firmware is supported. Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn> --- MAINTAINERS | 7 + drivers/soc/loongson/Kconfig | 9 + drivers/soc/loongson/Makefile | 1 + drivers/soc/loongson/loongson_se.c | 542 +++++++++++++++++++++++++++++ include/soc/loongson/se.h | 135 +++++++ 5 files changed, 694 insertions(+) create mode 100644 drivers/soc/loongson/loongson_se.c create mode 100644 include/soc/loongson/se.h base-commit: daa20223dee942ebea45bc72b517480af226c370