diff mbox series

[v4,2/3] dt-bindings: PCI: amd-mdb: Add AMD Versal2 MDB PCIe Root Port Bridge

Message ID 20241207171134.3253027-3-thippeswamy.havalige@amd.com (mailing list archive)
State Superseded
Headers show
Series Add support for AMD MDB IP as Root Port | expand

Commit Message

Havalige, Thippeswamy Dec. 7, 2024, 5:11 p.m. UTC 
Add AMD Versal2 MDB (Multimedia DMA Bridge) PCIe Root Port Bridge.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
---
Changes in v2:
-------------
- Modify patch subject.
- Add pcie host bridge reference.
- Modify filename as per compatible string.
- Remove standard PCI properties.
- Modify interrupt controller description.
- Indentation

Changes in v3:
-------------
- Modified SLCR to lower case.
- Add dwc schemas.
- Remove common properties.
- Move additionalProperties below properties.
- Remove ranges property from required properties.
- Drop blank line.
- Modify pci@ to pcie@

Changes in v4:
--------------
- None.
---
 .../bindings/pci/amd,versal2-mdb-host.yaml    | 121 ++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml

Comments

Rob Herring Dec. 7, 2024, 6:30 p.m. UTC | #1 
On Sat, 07 Dec 2024 22:41:33 +0530, Thippeswamy Havalige wrote:
> Add AMD Versal2 MDB (Multimedia DMA Bridge) PCIe Root Port Bridge.
> 
> Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
> ---
> Changes in v2:
> -------------
> - Modify patch subject.
> - Add pcie host bridge reference.
> - Modify filename as per compatible string.
> - Remove standard PCI properties.
> - Modify interrupt controller description.
> - Indentation
> 
> Changes in v3:
> -------------
> - Modified SLCR to lower case.
> - Add dwc schemas.
> - Remove common properties.
> - Move additionalProperties below properties.
> - Remove ranges property from required properties.
> - Drop blank line.
> - Modify pci@ to pcie@
> 
> Changes in v4:
> --------------
> - None.
> ---
>  .../bindings/pci/amd,versal2-mdb-host.yaml    | 121 ++++++++++++++++++
>  1 file changed, 121 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.example.dtb: pcie@ed931000: reg-names:0: 'oneOf' conditional failed, one must be fixed:
	'dbi' was expected
	'dbi2' was expected
	'mdb_pcie_slcr' is not one of ['elbi', 'app']
	'atu' was expected
	'dma' was expected
	'phy' was expected
	'config' was expected
	/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.example.dtb: pcie@ed931000: reg-names:0: 'oneOf' conditional failed, one must be fixed:
		'mdb_pcie_slcr' is not one of ['apb', 'mgmt', 'link', 'ulreg', 'appl']
		'mdb_pcie_slcr' is not one of ['atu_dma']
		'mdb_pcie_slcr' is not one of ['smu', 'mpu']
		'mdb_pcie_slcr' is not one of ['ecam']
		['mdb_pcie_slcr'] was expected
	from schema $id: http://devicetree.org/schemas/pci/amd,versal2-mdb-host.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241207171134.3253027-3-thippeswamy.havalige@amd.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
new file mode 100644
index 000000000000..c319adeeee66
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/amd,versal2-mdb-host.yaml
@@ -0,0 +1,121 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/amd,versal2-mdb-host.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD Versal2 MDB(Multimedia DMA Bridge) Host Controller
+
+maintainers:
+  - Thippeswamy Havalige <thippeswamy.havalige@amd.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+  - $ref: /schemas/pci/snps,dw-pcie.yaml#
+
+properties:
+  compatible:
+    const: amd,versal2-mdb-host
+
+  reg:
+    items:
+      - description: MDB PCIe controller 0 slcr
+      - description: configuration region
+      - description: data bus interface
+      - description: address translation unit register
+
+  reg-names:
+    items:
+      - const: mdb_pcie_slcr
+      - const: config
+      - const: dbi
+      - const: atu
+
+  ranges:
+    maxItems: 2
+
+  msi-map:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-map-mask:
+    items:
+      - const: 0
+      - const: 0
+      - const: 0
+      - const: 7
+
+  interrupt-map:
+    maxItems: 4
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-controller:
+    description: identifies the node as an interrupt controller
+    type: object
+    additionalProperties: false
+    properties:
+      interrupt-controller: true
+
+      "#address-cells":
+        const: 0
+
+      "#interrupt-cells":
+        const: 1
+
+    required:
+      - interrupt-controller
+      - "#address-cells"
+      - "#interrupt-cells"
+
+required:
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-map
+  - interrupt-map-mask
+  - msi-map
+  - "#interrupt-cells"
+  - interrupt-controller
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@ed931000 {
+            compatible = "amd,versal2-mdb-host";
+            reg = <0x0 0xed931000 0x0 0x2000>,
+                  <0x1000 0x100000 0x0 0xff00000>,
+                  <0x1000 0x0 0x0 0x100000>,
+                  <0x0 0xed860000 0x0 0x2000>;
+            reg-names = "mdb_pcie_slcr", "config", "dbi", "atu";
+            ranges = <0x2000000 0x00 0xa8000000 0x00 0xa8000000 0x00 0x10000000>,
+                     <0x43000000 0x1100 0x00 0x1100 0x00 0x00 0x1000000>;
+            interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-parent = <&gic>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0 0 0 1 &pcie_intc_0 0>,
+                            <0 0 0 2 &pcie_intc_0 1>,
+                            <0 0 0 3 &pcie_intc_0 2>,
+                            <0 0 0 4 &pcie_intc_0 3>;
+            msi-map = <0x0 &gic_its 0x00 0x10000>;
+            #address-cells = <3>;
+            #size-cells = <2>;
+            #interrupt-cells = <1>;
+            device_type = "pci";
+            pcie_intc_0: interrupt-controller {
+                #address-cells = <0>;
+                #interrupt-cells = <1>;
+                interrupt-controller;
+           };
+        };
+    };