diff mbox series

[v3,1/1] dt-bindings: PCI: mobiveil: convert mobiveil-pcie.txt to yaml format

Message ID 20241211171318.4129818-1-Frank.Li@nxp.com (mailing list archive)
State New
Delegated to: Krzysztof Wilczyński
Headers show
Series [v3,1/1] dt-bindings: PCI: mobiveil: convert mobiveil-pcie.txt to yaml format | expand

Commit Message

Frank Li Dec. 11, 2024, 5:13 p.m. UTC 
Convert device tree binding doc mobiveil-pcie.txt to yaml format. Merge
layerscape-pcie-gen4.txt into this file.

Additional change:
- interrupt-names: "aer", "pme", "intr", which align order in examples.
- reg-names: reorder as csr_axi_slave, config_axi_slave to match
layerscape-pcie-gen4 and existed Layerscape DTS users.

Fix below CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dtb: /soc/pcie@3400000: failed to match any schema with compatible: ['fsl,lx2160a-pcie']

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
Change from v2 to v3
- add discription in commit message bout reoder csr_axi_slave
and config_axi_slave
- sort compatible string
- move range after reg-names
- Add restriction for reg\interrupts\interrupt-names for mbvl,gpex40-pcie
- Add interrupts minItems for layerscape-pcie-gen4

Change from v1 to v2
- update MAINTEAINER file to fix below
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202412070127.BkBJhnZ4-lkp@intel.com/

>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt

lx2160a r2 already don't use this IP. But someone still complain when I
try to remove old r1 support.

So convert to yaml file to avoid annoised CHECK_DTBS warnings.
---
 .../bindings/pci/layerscape-pcie-gen4.txt     |  52 ------
 .../bindings/pci/mbvl,gpex40-pcie.yaml        | 173 ++++++++++++++++++
 .../devicetree/bindings/pci/mobiveil-pcie.txt |  72 --------
 MAINTAINERS                                   |   3 +-
 4 files changed, 174 insertions(+), 126 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
 create mode 100644 Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml
 delete mode 100644 Documentation/devicetree/bindings/pci/mobiveil-pcie.txt

Comments

Krzysztof Kozlowski Dec. 12, 2024, 8:22 a.m. UTC | #1 
On Wed, Dec 11, 2024 at 12:13:16PM -0500, Frank Li wrote:
> Convert device tree binding doc mobiveil-pcie.txt to yaml format. Merge
> layerscape-pcie-gen4.txt into this file.
> 
> Additional change:
> - interrupt-names: "aer", "pme", "intr", which align order in examples.
> - reg-names: reorder as csr_axi_slave, config_axi_slave to match
> layerscape-pcie-gen4 and existed Layerscape DTS users.
> 
> Fix below CHECK_DTBS warning:
> arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dtb: /soc/pcie@3400000: failed to match any schema with compatible: ['fsl,lx2160a-pcie']
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt b/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
deleted file mode 100644
index b40fb5d15d3d9..0000000000000
--- a/Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
+++ /dev/null
@@ -1,52 +0,0 @@ 
-NXP Layerscape PCIe Gen4 controller
-
-This PCIe controller is based on the Mobiveil PCIe IP and thus inherits all
-the common properties defined in mobiveil-pcie.txt.
-
-Required properties:
-- compatible: should contain the platform identifier such as:
-  "fsl,lx2160a-pcie"
-- reg: base addresses and lengths of the PCIe controller register blocks.
-  "csr_axi_slave": Bridge config registers
-  "config_axi_slave": PCIe controller registers
-- interrupts: A list of interrupt outputs of the controller. Must contain an
-  entry for each entry in the interrupt-names property.
-- interrupt-names: It could include the following entries:
-  "intr": The interrupt that is asserted for controller interrupts
-  "aer": Asserted for aer interrupt when chip support the aer interrupt with
-	 none MSI/MSI-X/INTx mode,but there is interrupt line for aer.
-  "pme": Asserted for pme interrupt when chip support the pme interrupt with
-	 none MSI/MSI-X/INTx mode,but there is interrupt line for pme.
-- dma-coherent: Indicates that the hardware IP block can ensure the coherency
-  of the data transferred from/to the IP block. This can avoid the software
-  cache flush/invalid actions, and improve the performance significantly.
-- msi-parent : See the generic MSI binding described in
-  Documentation/devicetree/bindings/interrupt-controller/msi.txt.
-
-Example:
-
-	pcie@3400000 {
-		compatible = "fsl,lx2160a-pcie";
-		reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
-		       0x80 0x00000000 0x0 0x00001000>; /* configuration space */
-		reg-names = "csr_axi_slave", "config_axi_slave";
-		interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
-			     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
-		interrupt-names = "aer", "pme", "intr";
-		#address-cells = <3>;
-		#size-cells = <2>;
-		device_type = "pci";
-		apio-wins = <8>;
-		ppio-wins = <8>;
-		dma-coherent;
-		bus-range = <0x0 0xff>;
-		msi-parent = <&its>;
-		ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
-		#interrupt-cells = <1>;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				<0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
-	};
diff --git a/Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml b/Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml
new file mode 100644
index 0000000000000..667b955bf25d4
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml
@@ -0,0 +1,173 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mbvl,gpex40-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mobiveil AXI PCIe Root Port Bridge
+
+maintainers:
+  - Frank Li <Frank Li@nxp.com>
+
+description:
+  Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
+  has up to 8 outbound and inbound windows for the address translation.
+
+  NXP Layerscape PCIe Gen4 controller (Deprecated) base on Mobiveil's GPEX 4.0.
+
+properties:
+  compatible:
+    enum:
+      - fsl,lx2160a-pcie
+      - mbvl,gpex40-pcie
+
+  reg:
+    items:
+      - description: PCIe controller registers
+      - description: Bridge config registers
+      - description: GPIO registers to control slot power
+      - description: MSI registers
+    minItems: 2
+
+  reg-names:
+    items:
+      - const: csr_axi_slave
+      - const: config_axi_slave
+      - const: gpio_slave
+      - const: apb_csr
+    minItems: 2
+
+  apio-wins:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      numbers of requested apio outbound windows
+        1. Config window
+        2. Memory window
+    default: 2
+    maximum: 256
+
+  ppio-wins:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: number of requested ppio inbound windows
+    default: 1
+    maximum: 256
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 3
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 3
+
+  dma-coherent: true
+
+  msi-parent: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+allOf:
+  - $ref: /schemas/pci/pci-host-bridge.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - fsl,lx2160a-pcie
+    then:
+      properties:
+        reg:
+          maxItems: 2
+
+        reg-names:
+          maxItems: 2
+
+        interrupts:
+          minItems: 3
+
+        interrupt-names:
+          items:
+            - const: aer
+            - const: pme
+            - const: intr
+    else:
+      properties:
+        dma-coherent: false
+        msi-parent: false
+        interrupts:
+          maxItems: 1
+        interrupt-names: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pcie@b0000000 {
+        compatible = "mbvl,gpex40-pcie";
+        reg = <0xb0000000 0x00010000>,
+              <0xa0000000 0x00001000>,
+              <0xff000000 0x00200000>,
+              <0xb0010000 0x00001000>;
+        reg-names = "csr_axi_slave",
+                    "config_axi_slave",
+                    "gpio_slave",
+                    "apb_csr";
+        ranges = <0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        apio-wins = <2>;
+        ppio-wins = <1>;
+        bus-range = <0x00000000 0x000000ff>;
+        interrupt-controller;
+        #interrupt-cells = <1>;
+        interrupt-parent = <&gic>;
+        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-map-mask = <0 0 0 7>;
+        interrupt-map = <0 0 0 0 &pci_express 0>,
+                        <0 0 0 1 &pci_express 1>,
+                        <0 0 0 2 &pci_express 2>,
+                        <0 0 0 3 &pci_express 3>;
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+        pcie@3400000 {
+            compatible = "fsl,lx2160a-pcie";
+            reg = <0x00 0x03400000 0x0 0x00100000   /* controller registers */
+                   0x80 0x00000000 0x0 0x00001000>; /* configuration space */
+            reg-names = "csr_axi_slave", "config_axi_slave";
+            ranges = <0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>;
+            interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* AER interrupt */
+                         <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, /* PME interrupt */
+                        <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */
+            interrupt-names = "aer", "pme", "intr";
+            #address-cells = <3>;
+            #size-cells = <2>;
+            device_type = "pci";
+            apio-wins = <8>;
+            ppio-wins = <8>;
+            dma-coherent;
+            bus-range = <0x0 0xff>;
+            msi-parent = <&its>;
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 7>;
+            interrupt-map = <0000 0 0 1 &gic 0 0 GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                            <0000 0 0 2 &gic 0 0 GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+                            <0000 0 0 3 &gic 0 0 GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                            <0000 0 0 4 &gic 0 0 GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
deleted file mode 100644
index 64156993e052d..0000000000000
--- a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+++ /dev/null
@@ -1,72 +0,0 @@ 
-* Mobiveil AXI PCIe Root Port Bridge DT description
-
-Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
-has up to 8 outbound and inbound windows for the address translation.
-
-Required properties:
-- #address-cells: Address representation for root ports, set to <3>
-- #size-cells: Size representation for root ports, set to <2>
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- compatible: Should contain "mbvl,gpex40-pcie"
-- reg: Should contain PCIe registers location and length
-	Mandatory:
-	"config_axi_slave": PCIe controller registers
-	"csr_axi_slave"	  : Bridge config registers
-	Optional:
-	"gpio_slave"	  : GPIO registers to control slot power
-	"apb_csr"	  : MSI registers
-
-- device_type: must be "pci"
-- apio-wins : number of requested apio outbound windows
-		default 2 outbound windows are configured -
-		1. Config window
-		2. Memory window
-- ppio-wins : number of requested ppio inbound windows
-		default 1 inbound memory window is configured.
-- bus-range: PCI bus numbers covered
-- interrupt-controller: identifies the node as an interrupt controller
-- #interrupt-cells: specifies the number of cells needed to encode an
-	interrupt source. The value must be 1.
-- interrupts: The interrupt line of the PCIe controller
-		last cell of this field is set to 4 to
-		denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
-- interrupt-map-mask,
-	interrupt-map: standard PCI properties to define the mapping of the
-	PCI interface to interrupt numbers.
-- ranges: ranges for the PCI memory regions (I/O space region is not
-	supported by hardware)
-	Please refer to the standard PCI bus binding document for a more
-	detailed explanation
-
-
-Example:
-++++++++
-	pcie0: pcie@a0000000 {
-		#address-cells = <3>;
-		#size-cells = <2>;
-		compatible = "mbvl,gpex40-pcie";
-		reg =	<0xa0000000 0x00001000>,
-			<0xb0000000 0x00010000>,
-			<0xff000000 0x00200000>,
-			<0xb0010000 0x00001000>;
-		reg-names =	"config_axi_slave",
-				"csr_axi_slave",
-				"gpio_slave",
-				"apb_csr";
-		device_type = "pci";
-		apio-wins = <2>;
-		ppio-wins = <1>;
-		bus-range = <0x00000000 0x000000ff>;
-		interrupt-controller;
-		interrupt-parent = <&gic>;
-		#interrupt-cells = <1>;
-		interrupts = < 0 89 4 >;
-		interrupt-map-mask = <0 0 0 7>;
-		interrupt-map = <0 0 0 0 &pci_express 0>,
-				<0 0 0 1 &pci_express 1>,
-				<0 0 0 2 &pci_express 2>,
-				<0 0 0 3 &pci_express 3>;
-		ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
-
-	};
diff --git a/MAINTAINERS b/MAINTAINERS
index 1e930c7a58b13..e0fcdd8b6434c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -17901,7 +17901,7 @@  M:	Karthikeyan Mitran <m.karthikeyan@mobiveil.co.in>
 M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
-F:	Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
+F:	Documentation/devicetree/bindings/pci/mbvl,gpex40-pcie.yaml
 F:	drivers/pci/controller/mobiveil/pcie-mobiveil*
 
 PCI DRIVER FOR MVEBU (Marvell Armada 370 and Armada XP SOC support)
@@ -17925,7 +17925,6 @@  M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
 L:	linux-pci@vger.kernel.org
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
-F:	Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
 F:	drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
 
 PCI DRIVER FOR PLDA PCIE IP