diff mbox series

[5/8] dt-bindings: dma: fsl-edma: add nxp,s32g2-edma compatible string

Message ID 20241216075819.2066772-6-larisa.grigore@oss.nxp.com (mailing list archive)
State Superseded
Headers show
Series Add eDMAv3 support for S32G2/S32G3 SoCs | expand

Commit Message

Larisa Ileana Grigore Dec. 16, 2024, 7:58 a.m. UTC
Introduce the compatible strings 'nxp,s32g2-edma' and 'nxp,s32g3-edma' to
enable the support for the eDMAv3 present on S32G2/S32G3 platforms.

The S32G2/S32G3 eDMA architecture features 32 DMA channels. Each of the
two eDMA instances is integrated with two DMAMUX blocks.
Another particularity of these SoCs is that the interrupts are shared
between channels in the following way:
- DMA Channels 0-15 share the 'tx-0-15' interrupt
- DMA Channels 16-31 share the 'tx-16-31' interrupt
- all channels share the 'err' interrupt

Signed-off-by: Larisa Grigore <larisa.grigore@oss.nxp.com>
---
 .../devicetree/bindings/dma/fsl,edma.yaml     | 34 +++++++++++++++++++
 1 file changed, 34 insertions(+)

Comments

Frank Li Dec. 16, 2024, 4:18 p.m. UTC | #1
On Mon, Dec 16, 2024 at 09:58:15AM +0200, Larisa Grigore wrote:
> Introduce the compatible strings 'nxp,s32g2-edma' and 'nxp,s32g3-edma' to
> enable the support for the eDMAv3 present on S32G2/S32G3 platforms.
>
> The S32G2/S32G3 eDMA architecture features 32 DMA channels. Each of the
> two eDMA instances is integrated with two DMAMUX blocks.
> Another particularity of these SoCs is that the interrupts are shared
> between channels in the following way:
> - DMA Channels 0-15 share the 'tx-0-15' interrupt
> - DMA Channels 16-31 share the 'tx-16-31' interrupt
> - all channels share the 'err' interrupt
>
> Signed-off-by: Larisa Grigore <larisa.grigore@oss.nxp.com>
> ---

Reviewed-by: Frank Li <Frank.Li@nxp.com>

>  .../devicetree/bindings/dma/fsl,edma.yaml     | 34 +++++++++++++++++++
>  1 file changed, 34 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> index d54140f18d34..4f925469533e 100644
> --- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> @@ -26,9 +26,13 @@ properties:
>            - fsl,imx93-edma3
>            - fsl,imx93-edma4
>            - fsl,imx95-edma5
> +          - nxp,s32g2-edma
>        - items:
>            - const: fsl,ls1028a-edma
>            - const: fsl,vf610-edma
> +      - items:
> +          - const: nxp,s32g3-edma
> +          - const: nxp,s32g2-edma
>
>    reg:
>      minItems: 1
> @@ -221,6 +225,36 @@ allOf:
>        properties:
>          power-domains: false
>
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: nxp,s32g2-edma
> +    then:
> +      properties:
> +        clocks:
> +          minItems: 2
> +          maxItems: 2
> +        clock-names:
> +          items:
> +            - const: dmamux0
> +            - const: dmamux1
> +        interrupts:
> +          minItems: 3
> +          maxItems: 3
> +        interrupt-names:
> +          items:
> +            - const: tx-0-15
> +            - const: tx-16-31
> +            - const: err
> +        reg:
> +          minItems: 3
> +          maxItems: 3
> +        "#dma-cells":
> +          const: 2
> +        dma-channels:
> +          const: 32
> +
>  unevaluatedProperties: false
>
>  examples:
> --
> 2.47.0
>
Krzysztof Kozlowski Dec. 17, 2024, 5:26 a.m. UTC | #2
On 16/12/2024 08:58, Larisa Grigore wrote:
> Introduce the compatible strings 'nxp,s32g2-edma' and 'nxp,s32g3-edma' to
> enable the support for the eDMAv3 present on S32G2/S32G3 platforms.
> 
Not tested.

<form letter>
Please use scripts/get_maintainers.pl to get a list of necessary people
and lists to CC. It might happen, that command when run on an older
kernel, gives you outdated entries. Therefore please be sure you base
your patches on recent Linux kernel.

Tools like b4 or scripts/get_maintainer.pl provide you proper list of
people, so fix your workflow. Tools might also fail if you work on some
ancient tree (don't, instead use mainline) or work on fork of kernel
(don't, instead use mainline). Just use b4 and everything should be
fine, although remember about `b4 prep --auto-to-cc` if you added new
patches to the patchset.

You missed at least devicetree list (maybe more), so this won't be
tested by automated tooling. Performing review on untested code might be
a waste of time.

Please kindly resend and include all necessary To/Cc entries.
</form letter>

Best regards,
Krzysztof
Larisa Ileana Grigore Dec. 17, 2024, 2:26 p.m. UTC | #3
On 12/17/2024 7:26 AM, Krzysztof Kozlowski wrote:
> [You don't often get email from krzk@kernel.org. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> On 16/12/2024 08:58, Larisa Grigore wrote:
>> Introduce the compatible strings 'nxp,s32g2-edma' and 'nxp,s32g3-edma' to
>> enable the support for the eDMAv3 present on S32G2/S32G3 platforms.
>>
> Not tested.
> 
> <form letter>
> Please use scripts/get_maintainers.pl to get a list of necessary people
> and lists to CC. It might happen, that command when run on an older
> kernel, gives you outdated entries. Therefore please be sure you base
> your patches on recent Linux kernel.
> 
> Tools like b4 or scripts/get_maintainer.pl provide you proper list of
> people, so fix your workflow. Tools might also fail if you work on some
> ancient tree (don't, instead use mainline) or work on fork of kernel
> (don't, instead use mainline). Just use b4 and everything should be
> fine, although remember about `b4 prep --auto-to-cc` if you added new
> patches to the patchset.
> 
> You missed at least devicetree list (maybe more), so this won't be
> tested by automated tooling. Performing review on untested code might be
> a waste of time.
> 
> Please kindly resend and include all necessary To/Cc entries.
> </form letter>

Thank you Krzysztof! I will fix it in V2.

> 
> Best regards,
> Krzysztof

Best regards,
Larisa
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
index d54140f18d34..4f925469533e 100644
--- a/Documentation/devicetree/bindings/dma/fsl,edma.yaml
+++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
@@ -26,9 +26,13 @@  properties:
           - fsl,imx93-edma3
           - fsl,imx93-edma4
           - fsl,imx95-edma5
+          - nxp,s32g2-edma
       - items:
           - const: fsl,ls1028a-edma
           - const: fsl,vf610-edma
+      - items:
+          - const: nxp,s32g3-edma
+          - const: nxp,s32g2-edma
 
   reg:
     minItems: 1
@@ -221,6 +225,36 @@  allOf:
       properties:
         power-domains: false
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: nxp,s32g2-edma
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: dmamux0
+            - const: dmamux1
+        interrupts:
+          minItems: 3
+          maxItems: 3
+        interrupt-names:
+          items:
+            - const: tx-0-15
+            - const: tx-16-31
+            - const: err
+        reg:
+          minItems: 3
+          maxItems: 3
+        "#dma-cells":
+          const: 2
+        dma-channels:
+          const: 32
+
 unevaluatedProperties: false
 
 examples: