Message ID | 20250218034859.40397-1-feng.tang@linux.alibaba.com (mailing list archive) |
---|---|
State | Changes Requested |
Delegated to: | Bjorn Helgaas |
Headers | show |
Series | [v2,1/2] PCI/portdrv: Add necessary wait for disabling hotplug events | expand |
> There was problem reported by firmware developers that they received > 2 pcie link control commands in very short intervals on an ARM server, > which doesn't comply with pcie spec, and broke their state machine and > work flow. According to PCIe 6.1 spec, section 6.7.3.2, software needs Would you like to use key words in consistent ways also in such a change description? > to wait at least 1 second for the command-complete event, before > resending the cmd or … command? … > --- > Changlog: > > since v1: … Are cover letters generally desirable for patch series? Regards, Markus
On 2/17/25 7:48 PM, Feng Tang wrote: > There was problem reported by firmware developers that they received > 2 pcie link control commands in very short intervals on an ARM server, > which doesn't comply with pcie spec, and broke their state machine and > work flow. According to PCIe 6.1 spec, section 6.7.3.2, software needs > to wait at least 1 second for the command-complete event, before > resending the cmd or sending a new cmd. > > And the first link control command firmware received is from > get_port_device_capability(), which sends cmd to disable pcie hotplug > interrupts without waiting for its completion. Were you able to narrow down the source of the second command? The reason I am asking is, the commit you are trying to fix seems to have existed for 10+ years and no one had faced any issues with it. So I am wondering whether this needs to fixed at this place or before executing the second command. > > Fix it by adding the necessary wait to comply with PCIe spec, referring > pcie_poll_cmd(). > > Also make the interrupt disabling not dependent on whether pciehp > service driver will be loaded as suggested by Lukas. May be this needs a new patch? > > Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization") > Originally-by: Liguang Zhang <zhangliguang@linux.alibaba.com> > Suggested-by: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com> > Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> > --- Code wise it looks fine to me. > Changlog: > > since v1: > * Add the Originally-by for Liguang. The issue was found on a 5.10 kernel, > then 6.6. I was initially given a 5.10 kernel tar bar without git info to > debug the issue, and made the patch. Thanks to Guanghui who recently pointed > me to tree https://gitee.com/anolis/cloud-kernel which show the wait logic > in 5.10 was originally from Liguang, and never hit mainline. > * Make the irq disabling not dependent on wthether pciehp service driver > will be loaded (Lukas Wunner) > * Use read_poll_timeout() API to simply the waiting logic (Sathyanarayanan > Kuppuswamy) > * Add logic to skip irq disabling if it is already disabled. > > drivers/pci/pci.h | 2 ++ > drivers/pci/pcie/portdrv.c | 44 +++++++++++++++++++++++++++++++++----- > 2 files changed, 41 insertions(+), 5 deletions(-) > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > index 01e51db8d285..c1e234d1b81d 100644 > --- a/drivers/pci/pci.h > +++ b/drivers/pci/pci.h > @@ -759,12 +759,14 @@ static inline void pcie_ecrc_get_policy(char *str) { } > #ifdef CONFIG_PCIEPORTBUS > void pcie_reset_lbms_count(struct pci_dev *port); > int pcie_lbms_count(struct pci_dev *port, unsigned long *val); > +void pcie_disable_hp_interrupts_early(struct pci_dev *dev); > #else > static inline void pcie_reset_lbms_count(struct pci_dev *port) {} > static inline int pcie_lbms_count(struct pci_dev *port, unsigned long *val) > { > return -EOPNOTSUPP; > } > +static inline void pcie_disable_hp_interrupts_early(struct pci_dev *dev) {} > #endif > > struct pci_dev_reset_methods { > diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c > index 02e73099bad0..2470333bba2f 100644 > --- a/drivers/pci/pcie/portdrv.c > +++ b/drivers/pci/pcie/portdrv.c > @@ -18,6 +18,7 @@ > #include <linux/string.h> > #include <linux/slab.h> > #include <linux/aer.h> > +#include <linux/iopoll.h> > > #include "../pci.h" > #include "portdrv.h" > @@ -205,6 +206,40 @@ static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask) > return 0; > } > > +static int pcie_wait_sltctl_cmd_raw(struct pci_dev *dev) > +{ > + u16 slot_status = 0; > + int ret, ret1, timeout_us; > + > + /* 1 second, according to PCIe spec 6.1, section 6.7.3.2 */ > + timeout_us = 1000000; > + ret = read_poll_timeout(pcie_capability_read_word, ret1, > + (slot_status & PCI_EXP_SLTSTA_CC), 10000, > + timeout_us, true, dev, PCI_EXP_SLTSTA, > + &slot_status); > + if (!ret) > + pcie_capability_write_word(dev, PCI_EXP_SLTSTA, > + PCI_EXP_SLTSTA_CC); > + > + return ret; > +} > + > +void pcie_disable_hp_interrupts_early(struct pci_dev *dev) > +{ > + u16 slot_ctrl = 0; > + > + pcie_capability_read_word(dev, PCI_EXP_SLTCTL, &slot_ctrl); > + /* Bail out early if it is already disabled */ > + if (!(slot_ctrl & (PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE))) > + return; > + > + pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, > + PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); > + > + if (pcie_wait_sltctl_cmd_raw(dev)) > + pci_info(dev, "Timeout on disabling PCIE hot-plug interrupt\n"); > +} > + > /** > * get_port_device_capability - discover capabilities of a PCI Express port > * @dev: PCI Express port to examine > @@ -222,16 +257,15 @@ static int get_port_device_capability(struct pci_dev *dev) > > if (dev->is_hotplug_bridge && > (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT || > - pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) && > - (pcie_ports_native || host->native_pcie_hotplug)) { > - services |= PCIE_PORT_SERVICE_HP; > + pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)) { > + if (pcie_ports_native || host->native_pcie_hotplug) > + services |= PCIE_PORT_SERVICE_HP; > > /* > * Disable hot-plug interrupts in case they have been enabled > * by the BIOS and the hot-plug service driver is not loaded. > */ > - pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, > - PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); > + pcie_disable_hp_interrupts_early(dev); > } > > #ifdef CONFIG_PCIEAER
On Tue, Feb 18, 2025 at 11:48:58AM +0800, Feng Tang wrote: > There was problem reported by firmware developers that they received > 2 pcie link control commands in very short intervals on an ARM server, > which doesn't comply with pcie spec, and broke their state machine and > work flow. According to PCIe 6.1 spec, section 6.7.3.2, software needs > to wait at least 1 second for the command-complete event, before > resending the cmd or sending a new cmd. s/link control/hotplug/ (also below) s/2/two/ s/pcie/PCIe/ (also below) > And the first link control command firmware received is from > get_port_device_capability(), which sends cmd to disable pcie hotplug > interrupts without waiting for its completion. > > Fix it by adding the necessary wait to comply with PCIe spec, referring > pcie_poll_cmd(). > > Also make the interrupt disabling not dependent on whether pciehp > service driver will be loaded as suggested by Lukas. This sounds like maybe it should be two separate patches. > Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization") > Originally-by: Liguang Zhang <zhangliguang@linux.alibaba.com> > Suggested-by: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com> > Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> > --- > Changlog: > > since v1: > * Add the Originally-by for Liguang. The issue was found on a 5.10 kernel, > then 6.6. I was initially given a 5.10 kernel tar bar without git info to > debug the issue, and made the patch. Thanks to Guanghui who recently pointed > me to tree https://gitee.com/anolis/cloud-kernel which show the wait logic > in 5.10 was originally from Liguang, and never hit mainline. > * Make the irq disabling not dependent on wthether pciehp service driver > will be loaded (Lukas Wunner) > * Use read_poll_timeout() API to simply the waiting logic (Sathyanarayanan > Kuppuswamy) > * Add logic to skip irq disabling if it is already disabled. > > drivers/pci/pci.h | 2 ++ > drivers/pci/pcie/portdrv.c | 44 +++++++++++++++++++++++++++++++++----- > 2 files changed, 41 insertions(+), 5 deletions(-) > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > index 01e51db8d285..c1e234d1b81d 100644 > --- a/drivers/pci/pci.h > +++ b/drivers/pci/pci.h > @@ -759,12 +759,14 @@ static inline void pcie_ecrc_get_policy(char *str) { } > #ifdef CONFIG_PCIEPORTBUS > void pcie_reset_lbms_count(struct pci_dev *port); > int pcie_lbms_count(struct pci_dev *port, unsigned long *val); > +void pcie_disable_hp_interrupts_early(struct pci_dev *dev); > #else > static inline void pcie_reset_lbms_count(struct pci_dev *port) {} > static inline int pcie_lbms_count(struct pci_dev *port, unsigned long *val) > { > return -EOPNOTSUPP; > } > +static inline void pcie_disable_hp_interrupts_early(struct pci_dev *dev) {} > #endif > > struct pci_dev_reset_methods { > diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c > index 02e73099bad0..2470333bba2f 100644 > --- a/drivers/pci/pcie/portdrv.c > +++ b/drivers/pci/pcie/portdrv.c > @@ -18,6 +18,7 @@ > #include <linux/string.h> > #include <linux/slab.h> > #include <linux/aer.h> > +#include <linux/iopoll.h> > > #include "../pci.h" > #include "portdrv.h" > @@ -205,6 +206,40 @@ static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask) > return 0; > } > > +static int pcie_wait_sltctl_cmd_raw(struct pci_dev *dev) > +{ > + u16 slot_status = 0; > + int ret, ret1, timeout_us; > + > + /* 1 second, according to PCIe spec 6.1, section 6.7.3.2 */ > + timeout_us = 1000000; > + ret = read_poll_timeout(pcie_capability_read_word, ret1, > + (slot_status & PCI_EXP_SLTSTA_CC), 10000, > + timeout_us, true, dev, PCI_EXP_SLTSTA, > + &slot_status); > + if (!ret) > + pcie_capability_write_word(dev, PCI_EXP_SLTSTA, > + PCI_EXP_SLTSTA_CC); > + > + return ret; Ugh. I really don't like the way this basically duplicates pcie_poll_cmd(). I don't have a great suggestion to fix it; maybe we need a way to build part of pciehp unconditionally. At the very least we need a comment here pointing to pcie_poll_cmd(). And IIUC this will add a one second delay for ports that don't need command completed events. I don't think that's fair to those ports. > +} > + > +void pcie_disable_hp_interrupts_early(struct pci_dev *dev) > +{ > + u16 slot_ctrl = 0; > + > + pcie_capability_read_word(dev, PCI_EXP_SLTCTL, &slot_ctrl); > + /* Bail out early if it is already disabled */ > + if (!(slot_ctrl & (PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE))) > + return; > + > + pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, > + PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); > + > + if (pcie_wait_sltctl_cmd_raw(dev)) > + pci_info(dev, "Timeout on disabling PCIE hot-plug interrupt\n"); s/PCIE/PCIe/ > +} > + > /** > * get_port_device_capability - discover capabilities of a PCI Express port > * @dev: PCI Express port to examine > @@ -222,16 +257,15 @@ static int get_port_device_capability(struct pci_dev *dev) > > if (dev->is_hotplug_bridge && > (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT || > - pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) && > - (pcie_ports_native || host->native_pcie_hotplug)) { > - services |= PCIE_PORT_SERVICE_HP; > + pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)) { > + if (pcie_ports_native || host->native_pcie_hotplug) > + services |= PCIE_PORT_SERVICE_HP; > > /* > * Disable hot-plug interrupts in case they have been enabled > * by the BIOS and the hot-plug service driver is not loaded. > */ > - pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, > - PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); > + pcie_disable_hp_interrupts_early(dev); > } > > #ifdef CONFIG_PCIEAER > -- > 2.43.5 >
Hi Markus, On Tue, Feb 18, 2025 at 10:00:33AM +0100, Markus Elfring wrote: > > There was problem reported by firmware developers that they received > > 2 pcie link control commands in very short intervals on an ARM server, > > which doesn't comply with pcie spec, and broke their state machine and > > work flow. According to PCIe 6.1 spec, section 6.7.3.2, software needs > > Would you like to use key words in consistent ways also in such a change description? Will do. thanks > > > to wait at least 1 second for the command-complete event, before > > resending the cmd or … > > command? Yes. > … > > --- > > Changlog: > > > > since v1: > … > > Are cover letters generally desirable for patch series? The 2 patches solve different issue, and not logically relevant. But I'll try in next version. Thanks, Feng > Regards, > Markus
Hi Bjorn Helgaas, Thanks for the review! On Tue, Feb 18, 2025 at 04:33:54PM -0600, Bjorn Helgaas wrote: > On Tue, Feb 18, 2025 at 11:48:58AM +0800, Feng Tang wrote: > > There was problem reported by firmware developers that they received > > 2 pcie link control commands in very short intervals on an ARM server, > > which doesn't comply with pcie spec, and broke their state machine and > > work flow. According to PCIe 6.1 spec, section 6.7.3.2, software needs > > to wait at least 1 second for the command-complete event, before > > resending the cmd or sending a new cmd. > > s/link control/hotplug/ (also below) > s/2/two/ > s/pcie/PCIe/ (also below) Will follow. > > And the first link control command firmware received is from > > get_port_device_capability(), which sends cmd to disable pcie hotplug > > interrupts without waiting for its completion. > > > > Fix it by adding the necessary wait to comply with PCIe spec, referring > > pcie_poll_cmd(). > > > > Also make the interrupt disabling not dependent on whether pciehp > > service driver will be loaded as suggested by Lukas. > > This sounds like maybe it should be two separate patches. OK. [...] > > > > +static int pcie_wait_sltctl_cmd_raw(struct pci_dev *dev) > > +{ > > + u16 slot_status = 0; > > + int ret, ret1, timeout_us; > > + > > + /* 1 second, according to PCIe spec 6.1, section 6.7.3.2 */ > > + timeout_us = 1000000; > > + ret = read_poll_timeout(pcie_capability_read_word, ret1, > > + (slot_status & PCI_EXP_SLTSTA_CC), 10000, > > + timeout_us, true, dev, PCI_EXP_SLTSTA, > > + &slot_status); > > + if (!ret) > > + pcie_capability_write_word(dev, PCI_EXP_SLTSTA, > > + PCI_EXP_SLTSTA_CC); > > + > > + return ret; > > Ugh. I really don't like the way this basically duplicates > pcie_poll_cmd(). I don't have a great suggestion to fix it; maybe we > need a way to build part of pciehp unconditionally. Yes, I also thought about this. One idea is to unify the two functions, and let pcie_poll_cmd() reuse this pcie_wait_sltctl_cmd_raw() here in portdrv.c. As CONFIG_HOTPLUG_PCI_PCIE depends on CONFIG_PCIEPORTBUS, there should be no dependency issue. How do you think? > At the very least > we need a comment here pointing to pcie_poll_cmd(). Aha, I mentioned 'referring pcie_poll_cmd()' in commit log, but forgot to add it here. > > And IIUC this will add a one second delay for ports that don't need > command completed events. I don't think that's fair to those ports. Good catch! So we should add a read of PCI_EXP_SLTCAP register and check if PCI_EXP_SLTCAP_HPC bit is set. > > +} > > + > > +void pcie_disable_hp_interrupts_early(struct pci_dev *dev) > > +{ > > + u16 slot_ctrl = 0; > > + > > + pcie_capability_read_word(dev, PCI_EXP_SLTCTL, &slot_ctrl); > > + /* Bail out early if it is already disabled */ > > + if (!(slot_ctrl & (PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE))) > > + return; > > + > > + pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, > > + PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); > > + > > + if (pcie_wait_sltctl_cmd_raw(dev)) > > + pci_info(dev, "Timeout on disabling PCIE hot-plug interrupt\n"); > > s/PCIE/PCIe/ Will change. Thanks, Feng
Hi Feng, kernel test robot noticed the following build warnings: [auto build test WARNING on pci/next] [also build test WARNING on pci/for-linus linus/master v6.14-rc3 next-20250218] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Feng-Tang/PCI-Disable-PCIE-hotplug-interrupts-early-when-msi-is-disabled/20250218-115134 base: https://git.kernel.org/pub/scm/linux/kernel/git/pci/pci.git next patch link: https://lore.kernel.org/r/20250218034859.40397-1-feng.tang%40linux.alibaba.com patch subject: [PATCH v2 1/2] PCI/portdrv: Add necessary wait for disabling hotplug events config: csky-randconfig-002-20250219 (https://download.01.org/0day-ci/archive/20250219/202502191308.uQbXkZna-lkp@intel.com/config) compiler: csky-linux-gcc (GCC) 14.2.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20250219/202502191308.uQbXkZna-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202502191308.uQbXkZna-lkp@intel.com/ All warnings (new ones prefixed by >>): drivers/pci/pcie/portdrv.c: In function 'pcie_wait_sltctl_cmd_raw': >> drivers/pci/pcie/portdrv.c:212:18: warning: variable 'ret1' set but not used [-Wunused-but-set-variable] 212 | int ret, ret1, timeout_us; | ^~~~ vim +/ret1 +212 drivers/pci/pcie/portdrv.c 208 209 static int pcie_wait_sltctl_cmd_raw(struct pci_dev *dev) 210 { 211 u16 slot_status = 0; > 212 int ret, ret1, timeout_us; 213 214 /* 1 second, according to PCIe spec 6.1, section 6.7.3.2 */ 215 timeout_us = 1000000; 216 ret = read_poll_timeout(pcie_capability_read_word, ret1, 217 (slot_status & PCI_EXP_SLTSTA_CC), 10000, 218 timeout_us, true, dev, PCI_EXP_SLTSTA, 219 &slot_status); 220 if (!ret) 221 pcie_capability_write_word(dev, PCI_EXP_SLTSTA, 222 PCI_EXP_SLTSTA_CC); 223 224 return ret; 225 } 226
Hi Sathyanarayanan, On Tue, Feb 18, 2025 at 10:58:19AM -0800, Sathyanarayanan Kuppuswamy wrote: > > On 2/17/25 7:48 PM, Feng Tang wrote: > > There was problem reported by firmware developers that they received > > 2 pcie link control commands in very short intervals on an ARM server, > > which doesn't comply with pcie spec, and broke their state machine and > > work flow. According to PCIe 6.1 spec, section 6.7.3.2, software needs > > to wait at least 1 second for the command-complete event, before > > resending the cmd or sending a new cmd. > > > > And the first link control command firmware received is from > > get_port_device_capability(), which sends cmd to disable pcie hotplug > > interrupts without waiting for its completion. > > Were you able to narrow down the source of the second command? The > reason I am asking is, the commit you are trying to fix seems to have > existed for 10+ years and no one had faced any issues with it. So > I am wondering whether this needs to fixed at this place or before > executing the second command. The second command comes from pcie_enable_notification(), which in our case will send command to enable hotplug interrupt again. The firmware developer found the problem when handling some device hotplug case, kind of stress case. I think maybe it's better to add the wait after this first command, which follows the PCIe spec naturally. Also v2 patch adds the logic of skipping the interrupt-disabling command, if it has been disabled earlier, either by kernel or BIOS. > > > > > Fix it by adding the necessary wait to comply with PCIe spec, referring > > pcie_poll_cmd(). > > > > Also make the interrupt disabling not dependent on whether pciehp > > service driver will be loaded as suggested by Lukas. > > May be this needs a new patch? Yes, will do. > > > > Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization") > > Originally-by: Liguang Zhang <zhangliguang@linux.alibaba.com> > > Suggested-by: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com> > > Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> > > --- > > Code wise it looks fine to me. Thanks for the review! - Feng > > Changlog: > > > > since v1: > > * Add the Originally-by for Liguang. The issue was found on a 5.10 kernel, > > then 6.6. I was initially given a 5.10 kernel tar bar without git info to > > debug the issue, and made the patch. Thanks to Guanghui who recently pointed > > me to tree https://gitee.com/anolis/cloud-kernel which show the wait logic > > in 5.10 was originally from Liguang, and never hit mainline. > > * Make the irq disabling not dependent on wthether pciehp service driver > > will be loaded (Lukas Wunner) > > * Use read_poll_timeout() API to simply the waiting logic (Sathyanarayanan > > Kuppuswamy) > > * Add logic to skip irq disabling if it is already disabled. > > > > drivers/pci/pci.h | 2 ++ > > drivers/pci/pcie/portdrv.c | 44 +++++++++++++++++++++++++++++++++----- > > 2 files changed, 41 insertions(+), 5 deletions(-) > > > > diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h > > index 01e51db8d285..c1e234d1b81d 100644 > > --- a/drivers/pci/pci.h > > +++ b/drivers/pci/pci.h > > @@ -759,12 +759,14 @@ static inline void pcie_ecrc_get_policy(char *str) { } > > #ifdef CONFIG_PCIEPORTBUS > > void pcie_reset_lbms_count(struct pci_dev *port); > > int pcie_lbms_count(struct pci_dev *port, unsigned long *val); > > +void pcie_disable_hp_interrupts_early(struct pci_dev *dev); > > #else > > static inline void pcie_reset_lbms_count(struct pci_dev *port) {} > > static inline int pcie_lbms_count(struct pci_dev *port, unsigned long *val) > > { > > return -EOPNOTSUPP; > > } > > +static inline void pcie_disable_hp_interrupts_early(struct pci_dev *dev) {} > > #endif > > struct pci_dev_reset_methods { > > diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c > > index 02e73099bad0..2470333bba2f 100644 > > --- a/drivers/pci/pcie/portdrv.c > > +++ b/drivers/pci/pcie/portdrv.c > > @@ -18,6 +18,7 @@ > > #include <linux/string.h> > > #include <linux/slab.h> > > #include <linux/aer.h> > > +#include <linux/iopoll.h> > > #include "../pci.h" > > #include "portdrv.h" > > @@ -205,6 +206,40 @@ static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask) > > return 0; > > } > > +static int pcie_wait_sltctl_cmd_raw(struct pci_dev *dev) > > +{ > > + u16 slot_status = 0; > > + int ret, ret1, timeout_us; > > + > > + /* 1 second, according to PCIe spec 6.1, section 6.7.3.2 */ > > + timeout_us = 1000000; > > + ret = read_poll_timeout(pcie_capability_read_word, ret1, > > + (slot_status & PCI_EXP_SLTSTA_CC), 10000, > > + timeout_us, true, dev, PCI_EXP_SLTSTA, > > + &slot_status); > > + if (!ret) > > + pcie_capability_write_word(dev, PCI_EXP_SLTSTA, > > + PCI_EXP_SLTSTA_CC); > > + > > + return ret; > > +} > > + > > +void pcie_disable_hp_interrupts_early(struct pci_dev *dev) > > +{ > > + u16 slot_ctrl = 0; > > + > > + pcie_capability_read_word(dev, PCI_EXP_SLTCTL, &slot_ctrl); > > + /* Bail out early if it is already disabled */ > > + if (!(slot_ctrl & (PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE))) > > + return; > > + > > + pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, > > + PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); > > + > > + if (pcie_wait_sltctl_cmd_raw(dev)) > > + pci_info(dev, "Timeout on disabling PCIE hot-plug interrupt\n"); > > +} > > + > > /** > > * get_port_device_capability - discover capabilities of a PCI Express port > > * @dev: PCI Express port to examine > > @@ -222,16 +257,15 @@ static int get_port_device_capability(struct pci_dev *dev) > > if (dev->is_hotplug_bridge && > > (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT || > > - pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) && > > - (pcie_ports_native || host->native_pcie_hotplug)) { > > - services |= PCIE_PORT_SERVICE_HP; > > + pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)) { > > + if (pcie_ports_native || host->native_pcie_hotplug) > > + services |= PCIE_PORT_SERVICE_HP; > > /* > > * Disable hot-plug interrupts in case they have been enabled > > * by the BIOS and the hot-plug service driver is not loaded. > > */ > > - pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, > > - PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); > > + pcie_disable_hp_interrupts_early(dev); > > } > > #ifdef CONFIG_PCIEAER > > -- > Sathyanarayanan Kuppuswamy > Linux Kernel Developer
On Wed, Feb 19, 2025 at 10:53:44AM +0800, Feng Tang wrote: [...] > > > > And IIUC this will add a one second delay for ports that don't need > > command completed events. I don't think that's fair to those ports. > > Good catch! So we should add a read of PCI_EXP_SLTCAP register and > check if PCI_EXP_SLTCAP_HPC bit is set. Maybe something like this? if (slot_cap & PCI_EXP_SLTCAP_HPC && !(slot_cap & PCI_EXP_SLTCAP_NCCS) && !pdev->broken_cmd_compl) do_the_wait(); Thanks, Feng
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 01e51db8d285..c1e234d1b81d 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -759,12 +759,14 @@ static inline void pcie_ecrc_get_policy(char *str) { } #ifdef CONFIG_PCIEPORTBUS void pcie_reset_lbms_count(struct pci_dev *port); int pcie_lbms_count(struct pci_dev *port, unsigned long *val); +void pcie_disable_hp_interrupts_early(struct pci_dev *dev); #else static inline void pcie_reset_lbms_count(struct pci_dev *port) {} static inline int pcie_lbms_count(struct pci_dev *port, unsigned long *val) { return -EOPNOTSUPP; } +static inline void pcie_disable_hp_interrupts_early(struct pci_dev *dev) {} #endif struct pci_dev_reset_methods { diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c index 02e73099bad0..2470333bba2f 100644 --- a/drivers/pci/pcie/portdrv.c +++ b/drivers/pci/pcie/portdrv.c @@ -18,6 +18,7 @@ #include <linux/string.h> #include <linux/slab.h> #include <linux/aer.h> +#include <linux/iopoll.h> #include "../pci.h" #include "portdrv.h" @@ -205,6 +206,40 @@ static int pcie_init_service_irqs(struct pci_dev *dev, int *irqs, int mask) return 0; } +static int pcie_wait_sltctl_cmd_raw(struct pci_dev *dev) +{ + u16 slot_status = 0; + int ret, ret1, timeout_us; + + /* 1 second, according to PCIe spec 6.1, section 6.7.3.2 */ + timeout_us = 1000000; + ret = read_poll_timeout(pcie_capability_read_word, ret1, + (slot_status & PCI_EXP_SLTSTA_CC), 10000, + timeout_us, true, dev, PCI_EXP_SLTSTA, + &slot_status); + if (!ret) + pcie_capability_write_word(dev, PCI_EXP_SLTSTA, + PCI_EXP_SLTSTA_CC); + + return ret; +} + +void pcie_disable_hp_interrupts_early(struct pci_dev *dev) +{ + u16 slot_ctrl = 0; + + pcie_capability_read_word(dev, PCI_EXP_SLTCTL, &slot_ctrl); + /* Bail out early if it is already disabled */ + if (!(slot_ctrl & (PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE))) + return; + + pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, + PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); + + if (pcie_wait_sltctl_cmd_raw(dev)) + pci_info(dev, "Timeout on disabling PCIE hot-plug interrupt\n"); +} + /** * get_port_device_capability - discover capabilities of a PCI Express port * @dev: PCI Express port to examine @@ -222,16 +257,15 @@ static int get_port_device_capability(struct pci_dev *dev) if (dev->is_hotplug_bridge && (pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT || - pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM) && - (pcie_ports_native || host->native_pcie_hotplug)) { - services |= PCIE_PORT_SERVICE_HP; + pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM)) { + if (pcie_ports_native || host->native_pcie_hotplug) + services |= PCIE_PORT_SERVICE_HP; /* * Disable hot-plug interrupts in case they have been enabled * by the BIOS and the hot-plug service driver is not loaded. */ - pcie_capability_clear_word(dev, PCI_EXP_SLTCTL, - PCI_EXP_SLTCTL_CCIE | PCI_EXP_SLTCTL_HPIE); + pcie_disable_hp_interrupts_early(dev); } #ifdef CONFIG_PCIEAER
There was problem reported by firmware developers that they received 2 pcie link control commands in very short intervals on an ARM server, which doesn't comply with pcie spec, and broke their state machine and work flow. According to PCIe 6.1 spec, section 6.7.3.2, software needs to wait at least 1 second for the command-complete event, before resending the cmd or sending a new cmd. And the first link control command firmware received is from get_port_device_capability(), which sends cmd to disable pcie hotplug interrupts without waiting for its completion. Fix it by adding the necessary wait to comply with PCIe spec, referring pcie_poll_cmd(). Also make the interrupt disabling not dependent on whether pciehp service driver will be loaded as suggested by Lukas. Fixes: 2bd50dd800b5 ("PCI: PCIe: Disable PCIe port services during port initialization") Originally-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Suggested-by: Sathyanarayanan Kuppuswamy <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Feng Tang <feng.tang@linux.alibaba.com> --- Changlog: since v1: * Add the Originally-by for Liguang. The issue was found on a 5.10 kernel, then 6.6. I was initially given a 5.10 kernel tar bar without git info to debug the issue, and made the patch. Thanks to Guanghui who recently pointed me to tree https://gitee.com/anolis/cloud-kernel which show the wait logic in 5.10 was originally from Liguang, and never hit mainline. * Make the irq disabling not dependent on wthether pciehp service driver will be loaded (Lukas Wunner) * Use read_poll_timeout() API to simply the waiting logic (Sathyanarayanan Kuppuswamy) * Add logic to skip irq disabling if it is already disabled. drivers/pci/pci.h | 2 ++ drivers/pci/pcie/portdrv.c | 44 +++++++++++++++++++++++++++++++++----- 2 files changed, 41 insertions(+), 5 deletions(-)