@@ -492,6 +492,7 @@ struct mt76_hw_cap {
#define MT_DRV_RX_DMA_HDR BIT(3)
#define MT_DRV_HW_MGMT_TXQ BIT(4)
#define MT_DRV_AMSDU_OFFLOAD BIT(5)
+#define MT_DRV_IGNORE_TXS_FAILED BIT(6)
struct mt76_driver_ops {
u32 drv_flags;
@@ -156,7 +156,8 @@ mt76x0e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
static const struct mt76_driver_ops drv_ops = {
.txwi_size = sizeof(struct mt76x02_txwi),
.drv_flags = MT_DRV_TX_ALIGNED4_SKBS |
- MT_DRV_SW_RX_AIRTIME,
+ MT_DRV_SW_RX_AIRTIME |
+ MT_DRV_IGNORE_TXS_FAILED,
.survey_flags = SURVEY_INFO_TIME_TX,
.update_survey = mt76x02_update_channel,
.set_channel = mt76x0_set_channel,
@@ -214,7 +214,8 @@ static int mt76x0u_probe(struct usb_interface *usb_intf,
const struct usb_device_id *id)
{
static const struct mt76_driver_ops drv_ops = {
- .drv_flags = MT_DRV_SW_RX_AIRTIME,
+ .drv_flags = MT_DRV_SW_RX_AIRTIME |
+ MT_DRV_IGNORE_TXS_FAILED,
.survey_flags = SURVEY_INFO_TIME_TX,
.update_survey = mt76x02_update_channel,
.set_channel = mt76x0_set_channel,
@@ -22,7 +22,8 @@ mt76x2e_probe(struct pci_dev *pdev, const struct pci_device_id *id)
static const struct mt76_driver_ops drv_ops = {
.txwi_size = sizeof(struct mt76x02_txwi),
.drv_flags = MT_DRV_TX_ALIGNED4_SKBS |
- MT_DRV_SW_RX_AIRTIME,
+ MT_DRV_SW_RX_AIRTIME |
+ MT_DRV_IGNORE_TXS_FAILED,
.survey_flags = SURVEY_INFO_TIME_TX,
.update_survey = mt76x02_update_channel,
.set_channel = mt76x2e_set_channel,
@@ -29,7 +29,8 @@ static int mt76x2u_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
static const struct mt76_driver_ops drv_ops = {
- .drv_flags = MT_DRV_SW_RX_AIRTIME,
+ .drv_flags = MT_DRV_SW_RX_AIRTIME |
+ MT_DRV_IGNORE_TXS_FAILED,
.survey_flags = SURVEY_INFO_TIME_TX,
.update_survey = mt76x02_update_channel,
.set_channel = mt76x2u_set_channel,
@@ -100,7 +100,8 @@ __mt76_tx_status_skb_done(struct mt76_dev *dev, struct sk_buff *skb, u8 flags,
return;
/* Tx status can be unreliable. if it fails, mark the frame as ACKed */
- if (flags & MT_TX_CB_TXS_FAILED) {
+ if (flags & MT_TX_CB_TXS_FAILED &&
+ (dev->drv->drv_flags & MT_DRV_IGNORE_TXS_FAILED)) {
info->status.rates[0].count = 0;
info->status.rates[0].idx = -1;
info->flags |= IEEE80211_TX_STAT_ACK;
The interrupt status polling is unreliable, which can cause status events to get lost. On all newer chips, txs-timeout is an indication that the packet was either never sent, or never acked. Fixes issues with inactivity polling. Signed-off-by: Felix Fietkau <nbd@nbd.name> --- drivers/net/wireless/mediatek/mt76/mt76.h | 1 + drivers/net/wireless/mediatek/mt76/mt76x0/pci.c | 3 ++- drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 3 ++- drivers/net/wireless/mediatek/mt76/mt76x2/pci.c | 3 ++- drivers/net/wireless/mediatek/mt76/mt76x2/usb.c | 3 ++- drivers/net/wireless/mediatek/mt76/tx.c | 3 ++- 6 files changed, 11 insertions(+), 5 deletions(-)