diff mbox

[v6,7/7] ARM: davinci: add support for the am1808 based enbw_cmc board

Message ID 1341492608-20597-1-git-send-email-hs@denx.de (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Schocher July 5, 2012, 12:50 p.m. UTC
- AM1808 based board
- 64 MiB DDR ram
- 2 MiB Nor flash
- 128 MiB NAND flash
- use internal RTC
- I2C support
- hwmon lm75 support
- UBI/UBIFS support
- MMC support
- USB OTG support

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree-discuss@lists.ozlabs.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: linux-mtd@lists.infradead.org
Cc: linux-i2c@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Wolfram Sang <w.sang@pengutronix.de>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Scott Wood <scottwood@freescale.com>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>

---
- post this board support with USB support, even though
  USB is only working with the 10 ms "workaround", posted here:
  http://comments.gmane.org/gmane.linux.usb.general/54505
  I see this issue also on the AM1808 TMDXEXP1808L evalboard.
- MMC and USB are not using OF support yet, ideas how to port
  this are welcome. I need for USB and MMC boards board
  specific callbacks, how to solve this with OF support?

- changes for v2:
  - changes in the nand node due to comments from Scott Wood:
    - add "ti,davinci-" prefix
    - Dashes are preferred to underscores
    - rename "nandflash" to "nand"
    - introduce new "ti,davinci" specific properties for setting
      up ecc_mode, ecc_bits, options and bbt options, instead
      using linux defines
  - changes for i2c due to comments from Sylwester Nawrocki:
    - use "cell-index" instead "id"
    - OF_DEV_AUXDATA in the machine code, instead pre-define
      platform device name
  - add comment from Grant Likely for i2c:
    - removed "id" resp. "cell-index" completely
    - fixed documentation
    - use of_match_ptr()
    - use devm_kzalloc() for allocating plattform data mem
    - fixed a whitespace issue
  - add net comments from Grant Likely:
    - add prefix "ti,davinci-" to davinci specific property names
    - remove version property
    - use compatible name "ti,davinci-dm6460-emac"
  - add comment from Grant Likely:
    - rename compatible node
    - do not use cell-index
    - CONFIG_OF required for this board
    TODO:
    - create a generic board support file, as I got no
      answer to my ping to grant, maybe this could be done
      in a second step?
- changes for v3:
  - add comments from Sergei Shtylyov:
    - rename compatible" prop to "ti,cp_intc"
    - cp_intc_init now used for Interrupt controller init
- changes for v4:
  add comment from Nori Sekhar:
  - rename davinci emac compatible property to "ti,davinci-dm6467-emac"
  - remove "pinmux-handle" property as discussed here:
    http://www.spinics.net/lists/arm-kernel/msg175701.html
    with Nori Sekhar

- changes for v5:
  add comments from Grant Likely:
  - rename compatible" prop to "ti,cp-intc"

- changes for v6:
  rework this patch, as patch
  ARM: davinci: cp_intc: Add OF support for TI interrupt controller
  was changed from Nori Sekhar on Jul 03, 2012; 9:16pm
  Changes therefore in this patch:

  Call of_irq_init() in the generic DT board file and not in the
  interrupt controller code. See arch/arm/mach-at91/board-dt.c or
  arch/arm/mach-omap2/board-generic.c for examples.

  At this point the question raises, if we should rename this
  board port from arch/arm/mach-davinci/enbw_cmc.c to
  arch/arm/mach-davinci/board-dt.c ? Also the defconfig to
  davinci_of_defconfig ... ? The USB and MMC callbacks are
  currently board specific, but if other boards come in,
  that could be easily adapted for their needs ...

 arch/arm/boot/dts/enbw_cmc.dts                  |  183 +++++++++++
 arch/arm/configs/enbw_cmc_defconfig             |  126 ++++++++
 arch/arm/mach-davinci/Kconfig                   |    9 +
 arch/arm/mach-davinci/Makefile                  |    1 +
 arch/arm/mach-davinci/board-enbw-cmc.c          |  385 +++++++++++++++++++++++
 arch/arm/mach-davinci/include/mach/uncompress.h |    1 +
 6 files changed, 705 insertions(+), 0 deletions(-)
 create mode 100644 arch/arm/boot/dts/enbw_cmc.dts
 create mode 100644 arch/arm/configs/enbw_cmc_defconfig
 create mode 100644 arch/arm/mach-davinci/board-enbw-cmc.c

Comments

Sekhar Nori Aug. 8, 2012, 5:35 p.m. UTC | #1
Hi Heiko,

On 7/5/2012 6:20 PM, Heiko Schocher wrote:
> - AM1808 based board
> - 64 MiB DDR ram
> - 2 MiB Nor flash
> - 128 MiB NAND flash
> - use internal RTC
> - I2C support
> - hwmon lm75 support
> - UBI/UBIFS support
> - MMC support
> - USB OTG support
> 
> Signed-off-by: Heiko Schocher <hs@denx.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: devicetree-discuss@lists.ozlabs.org
> Cc: davinci-linux-open-source@linux.davincidsp.com
> Cc: linux-mtd@lists.infradead.org
> Cc: linux-i2c@vger.kernel.org
> Cc: netdev@vger.kernel.org
> Cc: David Woodhouse <dwmw2@infradead.org>
> Cc: Ben Dooks <ben-linux@fluff.org>
> Cc: Wolfram Sang <w.sang@pengutronix.de>
> Cc: Sekhar Nori <nsekhar@ti.com>
> Cc: Kevin Hilman <khilman@ti.com>
> Cc: Wolfgang Denk <wd@denx.de>
> Cc: Scott Wood <scottwood@freescale.com>
> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
> 
> ---
> - post this board support with USB support, even though
>   USB is only working with the 10 ms "workaround", posted here:
>   http://comments.gmane.org/gmane.linux.usb.general/54505
>   I see this issue also on the AM1808 TMDXEXP1808L evalboard.
> - MMC and USB are not using OF support yet, ideas how to port
>   this are welcome. I need for USB and MMC boards board
>   specific callbacks, how to solve this with OF support?
> 
> - changes for v2:
>   - changes in the nand node due to comments from Scott Wood:
>     - add "ti,davinci-" prefix
>     - Dashes are preferred to underscores
>     - rename "nandflash" to "nand"
>     - introduce new "ti,davinci" specific properties for setting
>       up ecc_mode, ecc_bits, options and bbt options, instead
>       using linux defines
>   - changes for i2c due to comments from Sylwester Nawrocki:
>     - use "cell-index" instead "id"
>     - OF_DEV_AUXDATA in the machine code, instead pre-define
>       platform device name
>   - add comment from Grant Likely for i2c:
>     - removed "id" resp. "cell-index" completely
>     - fixed documentation
>     - use of_match_ptr()
>     - use devm_kzalloc() for allocating plattform data mem
>     - fixed a whitespace issue
>   - add net comments from Grant Likely:
>     - add prefix "ti,davinci-" to davinci specific property names
>     - remove version property
>     - use compatible name "ti,davinci-dm6460-emac"
>   - add comment from Grant Likely:
>     - rename compatible node
>     - do not use cell-index
>     - CONFIG_OF required for this board
>     TODO:
>     - create a generic board support file, as I got no
>       answer to my ping to grant, maybe this could be done
>       in a second step?
> - changes for v3:
>   - add comments from Sergei Shtylyov:
>     - rename compatible" prop to "ti,cp_intc"
>     - cp_intc_init now used for Interrupt controller init
> - changes for v4:
>   add comment from Nori Sekhar:
>   - rename davinci emac compatible property to "ti,davinci-dm6467-emac"
>   - remove "pinmux-handle" property as discussed here:
>     http://www.spinics.net/lists/arm-kernel/msg175701.html
>     with Nori Sekhar
> 
> - changes for v5:
>   add comments from Grant Likely:
>   - rename compatible" prop to "ti,cp-intc"
> 
> - changes for v6:
>   rework this patch, as patch
>   ARM: davinci: cp_intc: Add OF support for TI interrupt controller
>   was changed from Nori Sekhar on Jul 03, 2012; 9:16pm
>   Changes therefore in this patch:
> 
>   Call of_irq_init() in the generic DT board file and not in the
>   interrupt controller code. See arch/arm/mach-at91/board-dt.c or
>   arch/arm/mach-omap2/board-generic.c for examples.
> 
>   At this point the question raises, if we should rename this
>   board port from arch/arm/mach-davinci/enbw_cmc.c to
>   arch/arm/mach-davinci/board-dt.c ? Also the defconfig to
>   davinci_of_defconfig ... ? The USB and MMC callbacks are
>   currently board specific, but if other boards come in,
>   that could be easily adapted for their needs ...
> 
>  arch/arm/boot/dts/enbw_cmc.dts                  |  183 +++++++++++
>  arch/arm/configs/enbw_cmc_defconfig             |  126 ++++++++
>  arch/arm/mach-davinci/Kconfig                   |    9 +
>  arch/arm/mach-davinci/Makefile                  |    1 +
>  arch/arm/mach-davinci/board-enbw-cmc.c          |  385 +++++++++++++++++++++++
>  arch/arm/mach-davinci/include/mach/uncompress.h |    1 +
>  6 files changed, 705 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/enbw_cmc.dts
>  create mode 100644 arch/arm/configs/enbw_cmc_defconfig
>  create mode 100644 arch/arm/mach-davinci/board-enbw-cmc.c

With the move to DT, we are not going to add more board specific files
and defconfigs. I am working on adding a generic dt board file for DA850
(similar to what has been done for imx). That file is not going to do
any platform device registrations. If you are OK with it, I will add the
dts file for enbw_cmc board in the patch series I am planning to post.

Things like USB and MMC/SD will need to be converted to DT before they
can be supported on new boards.

Thanks,
Sekhar
Heiko Schocher Aug. 9, 2012, 7:52 a.m. UTC | #2
Hello Nori,

On 08.08.2012 19:35, Sekhar Nori wrote:
> Hi Heiko,
>
> On 7/5/2012 6:20 PM, Heiko Schocher wrote:
>> - AM1808 based board
>> - 64 MiB DDR ram
>> - 2 MiB Nor flash
>> - 128 MiB NAND flash
>> - use internal RTC
>> - I2C support
>> - hwmon lm75 support
>> - UBI/UBIFS support
>> - MMC support
>> - USB OTG support
>>
>> Signed-off-by: Heiko Schocher<hs@denx.de>
>> Cc: linux-arm-kernel@lists.infradead.org
>> Cc: devicetree-discuss@lists.ozlabs.org
>> Cc: davinci-linux-open-source@linux.davincidsp.com
>> Cc: linux-mtd@lists.infradead.org
>> Cc: linux-i2c@vger.kernel.org
>> Cc: netdev@vger.kernel.org
>> Cc: David Woodhouse<dwmw2@infradead.org>
>> Cc: Ben Dooks<ben-linux@fluff.org>
>> Cc: Wolfram Sang<w.sang@pengutronix.de>
>> Cc: Sekhar Nori<nsekhar@ti.com>
>> Cc: Kevin Hilman<khilman@ti.com>
>> Cc: Wolfgang Denk<wd@denx.de>
>> Cc: Scott Wood<scottwood@freescale.com>
>> Cc: Sylwester Nawrocki<s.nawrocki@samsung.com>
>>
>> ---
>> - post this board support with USB support, even though
>>    USB is only working with the 10 ms "workaround", posted here:
>>    http://comments.gmane.org/gmane.linux.usb.general/54505
>>    I see this issue also on the AM1808 TMDXEXP1808L evalboard.
>> - MMC and USB are not using OF support yet, ideas how to port
>>    this are welcome. I need for USB and MMC boards board
>>    specific callbacks, how to solve this with OF support?
>>
>> - changes for v2:
>>    - changes in the nand node due to comments from Scott Wood:
>>      - add "ti,davinci-" prefix
>>      - Dashes are preferred to underscores
>>      - rename "nandflash" to "nand"
>>      - introduce new "ti,davinci" specific properties for setting
>>        up ecc_mode, ecc_bits, options and bbt options, instead
>>        using linux defines
>>    - changes for i2c due to comments from Sylwester Nawrocki:
>>      - use "cell-index" instead "id"
>>      - OF_DEV_AUXDATA in the machine code, instead pre-define
>>        platform device name
>>    - add comment from Grant Likely for i2c:
>>      - removed "id" resp. "cell-index" completely
>>      - fixed documentation
>>      - use of_match_ptr()
>>      - use devm_kzalloc() for allocating plattform data mem
>>      - fixed a whitespace issue
>>    - add net comments from Grant Likely:
>>      - add prefix "ti,davinci-" to davinci specific property names
>>      - remove version property
>>      - use compatible name "ti,davinci-dm6460-emac"
>>    - add comment from Grant Likely:
>>      - rename compatible node
>>      - do not use cell-index
>>      - CONFIG_OF required for this board
>>      TODO:
>>      - create a generic board support file, as I got no
>>        answer to my ping to grant, maybe this could be done
>>        in a second step?
>> - changes for v3:
>>    - add comments from Sergei Shtylyov:
>>      - rename compatible" prop to "ti,cp_intc"
>>      - cp_intc_init now used for Interrupt controller init
>> - changes for v4:
>>    add comment from Nori Sekhar:
>>    - rename davinci emac compatible property to "ti,davinci-dm6467-emac"
>>    - remove "pinmux-handle" property as discussed here:
>>      http://www.spinics.net/lists/arm-kernel/msg175701.html
>>      with Nori Sekhar
>>
>> - changes for v5:
>>    add comments from Grant Likely:
>>    - rename compatible" prop to "ti,cp-intc"
>>
>> - changes for v6:
>>    rework this patch, as patch
>>    ARM: davinci: cp_intc: Add OF support for TI interrupt controller
>>    was changed from Nori Sekhar on Jul 03, 2012; 9:16pm
>>    Changes therefore in this patch:
>>
>>    Call of_irq_init() in the generic DT board file and not in the
>>    interrupt controller code. See arch/arm/mach-at91/board-dt.c or
>>    arch/arm/mach-omap2/board-generic.c for examples.
>>
>>    At this point the question raises, if we should rename this
>>    board port from arch/arm/mach-davinci/enbw_cmc.c to
>>    arch/arm/mach-davinci/board-dt.c ? Also the defconfig to
>>    davinci_of_defconfig ... ? The USB and MMC callbacks are
>>    currently board specific, but if other boards come in,
>>    that could be easily adapted for their needs ...
>>
>>   arch/arm/boot/dts/enbw_cmc.dts                  |  183 +++++++++++
>>   arch/arm/configs/enbw_cmc_defconfig             |  126 ++++++++
>>   arch/arm/mach-davinci/Kconfig                   |    9 +
>>   arch/arm/mach-davinci/Makefile                  |    1 +
>>   arch/arm/mach-davinci/board-enbw-cmc.c          |  385 +++++++++++++++++++++++
>>   arch/arm/mach-davinci/include/mach/uncompress.h |    1 +
>>   6 files changed, 705 insertions(+), 0 deletions(-)
>>   create mode 100644 arch/arm/boot/dts/enbw_cmc.dts
>>   create mode 100644 arch/arm/configs/enbw_cmc_defconfig
>>   create mode 100644 arch/arm/mach-davinci/board-enbw-cmc.c
>
> With the move to DT, we are not going to add more board specific files
> and defconfigs. I am working on adding a generic dt board file for DA850
> (similar to what has been done for imx). That file is not going to do
> any platform device registrations. If you are OK with it, I will add the
> dts file for enbw_cmc board in the patch series I am planning to post.

I am fine with that. If you have a working version, you can sent it
(if you want) to me, so I can test it on the enbw_cmc board.

> Things like USB and MMC/SD will need to be converted to DT before they
> can be supported on new boards.

Ok, understood.

bye,
Heiko
diff mbox

Patch

diff --git a/arch/arm/boot/dts/enbw_cmc.dts b/arch/arm/boot/dts/enbw_cmc.dts
new file mode 100644
index 0000000..32dc7a9
--- /dev/null
+++ b/arch/arm/boot/dts/enbw_cmc.dts
@@ -0,0 +1,183 @@ 
+/*
+ * Device Tree for the EnBW CMC plattform
+ *
+ * Copyright 2011 DENX Software Engineering GmbH
+ * Heiko Schocher <hs@denx.de>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "EnBW CMC";
+	compatible = "enbw,cmc";
+
+	aliases {
+		ethernet0 = &eth0;
+	};
+
+	arm {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xfffee000 0x00020000>;
+		intc: interrupt-controller@1 {
+			compatible = "ti,cp-intc";
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			ti,intc-size = <101>;
+			reg = <0x0 0x2000>;
+		};
+	};
+	soc@1c00000 {
+		compatible = "ti,da850";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x01c00000 0x400000>;
+
+		serial0: serial@1c42000 {
+			compatible = "ti,da850", "ns16550a";
+			reg = <0x42000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <25>;
+			interrupt-parent = <&intc>;
+		};
+		serial1: serial@1d0c000 {
+			compatible = "ti,da850", "ns16550a";
+			reg = <0x10c000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <53>;
+			interrupt-parent = <&intc>;
+		};
+		serial2: serial@1d0d000 {
+			compatible = "ti,da850", "ns16550a";
+			reg = <0x10d000 0x100>;
+			clock-frequency = <150000000>;
+			reg-shift = <2>;
+			interrupts = <61>;
+			interrupt-parent = <&intc>;
+		};
+
+		eth0: emac@1e20000 {
+			compatible = "ti,davinci-dm6467-emac";
+			reg = <0x220000 0x4000>;
+			ti,davinci-ctrl-reg-offset = <0x3000>;
+			ti,davinci-ctrl-mod-reg-offset = <0x2000>;
+			ti,davinci-ctrl-ram-offset = <0>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <33
+					34
+					35
+					36
+					>;
+			interrupt-parent = <&intc>;
+		};
+
+		i2c@1c22000 {
+			compatible = "ti,davinci-i2c";
+			reg = <0x22000 0x1000>;
+			clock-frequency = <100000>;
+			interrupts = <15>;
+			interrupt-parent = <&intc>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dtt@48 {
+				compatible = "national,lm75";
+				reg = <0x48>;
+			};
+		};
+
+		wdt@1c21000 {
+			compatible = "ti,davinci-wdt";
+			reg = <0x00021000 0x1000>;
+			period = <100>;
+		};
+		bootcount@1c23000 {
+			compatible = "uboot,bootcount";
+			reg = <0x23060 0x20>;
+		};
+
+	};
+	onchipram@8000000 {
+		compatible = "ti,davinci-onchipram";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x80000000 0x20000>;
+	};
+	aemif@60000000 {
+		compatible = "ti,davinci-aemif";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0x68000000 0x80000>;
+		ranges = <2 0 0x60000000 0x02000000
+			  3 0 0x62000000 0x02000000
+			  4 0 0x64000000 0x02000000
+			  5 0 0x66000000 0x02000000
+			  6 0 0x68000000 0x02000000>;
+		cs2@68000000 {
+			compatible = "ti,davinci-cs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* all timings in nanoseconds */
+			cs = <2>;
+			asize = <1>;
+			ta = <0>;
+			rhold = <7>;
+			rstrobe = <42>;
+			rsetup = <14>;
+			whold = <7>;
+			wstrobe = <42>;
+			wsetup = <14>;
+			ew = <0>;
+			ss = <0>;
+		};
+		flash@2,0 {
+			compatible = "cfi-flash";
+			reg = <2 0x0 0x400000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bank-width = <2>;
+			device-width = <2>;
+		};
+		nand_cs: cs3@68000000 {
+			compatible = "ti,davinci-cs";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			/* all timings in nanoseconds */
+			cs = <3>;
+			asize = <0>;
+			ta = <0>;
+			rhold = <7>;
+			rstrobe = <42>;
+			rsetup = <7>;
+			whold = <7>;
+			wstrobe = <14>;
+			wsetup = <7>;
+			ew = <0>;
+			ss = <0>;
+		};
+		nand@3,0 {
+			compatible = "ti,davinci-nand";
+			reg = <3 0x0 0x807ff
+				6 0x0 0x8000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ti,davinci-chipselect = <1>;
+			ti,davinci-mask-ale = <0>;
+			ti,davinci-mask-cle = <0>;
+			ti,davinci-mask-chipsel = <0>;
+			ti,davinci-ecc-mode = "hw";
+			ti,davinci-ecc-bits = <4>;
+			ti,davinci-nand-use-bbt;
+			timing-handle = <&nand_cs>;
+		};
+
+	};
+};
diff --git a/arch/arm/configs/enbw_cmc_defconfig b/arch/arm/configs/enbw_cmc_defconfig
new file mode 100644
index 0000000..b6b01c2
--- /dev/null
+++ b/arch/arm/configs/enbw_cmc_defconfig
@@ -0,0 +1,126 @@ 
+CONFIG_EXPERIMENTAL=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_LOGBUFFER=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_DAVINCI=y
+CONFIG_ARCH_DAVINCI_DA850=y
+# CONFIG_MACH_DAVINCI_DA850_EVM is not set
+CONFIG_GPIO_PCA953X=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_USE_OF=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_LRO is not set
+CONFIG_IPV6=y
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_DAVINCI=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_UBOOT_BOOTCOUNT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_TI_DAVINCI_EMAC=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DAVINCI=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_PCF857X=y
+CONFIG_SENSORS_LM75=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_WD=y
+CONFIG_DAVINCI_WATCHDOG=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_DA8XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_UAS=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FUSB300=y
+CONFIG_USB_ETH=y
+CONFIG_MMC=y
+CONFIG_MMC_DAVINCI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_OMAP=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_DEBUG_FS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=m
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 32d837d..4cb0469 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -202,6 +202,15 @@  config DA850_WL12XX
 	  Say Y if you want to use a wl1271 expansion card connected to the
 	  AM18x EVM.
 
+config MACH_ENBW_CMC
+	bool "EnBW Communication Module Compact"
+	default ARCH_DAVINCI_DA850
+	depends on ARCH_DAVINCI_DA850
+	select OF
+	help
+	  Say Y here to select the EnBW Communication Module Compact
+	  board.
+
 config GPIO_PCA953X
 	default MACH_DAVINCI_DA850_EVM
 
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2db78bd..12f3166 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -34,6 +34,7 @@  obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
 obj-$(CONFIG_MACH_TNETV107X)		+= board-tnetv107x-evm.o
 obj-$(CONFIG_MACH_MITYOMAPL138)		+= board-mityomapl138.o
 obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD)	+= board-omapl138-hawk.o
+obj-$(CONFIG_MACH_ENBW_CMC)		+= board-enbw-cmc.o
 
 # Power Management
 obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
diff --git a/arch/arm/mach-davinci/board-enbw-cmc.c b/arch/arm/mach-davinci/board-enbw-cmc.c
new file mode 100644
index 0000000..b475d6d
--- /dev/null
+++ b/arch/arm/mach-davinci/board-enbw-cmc.c
@@ -0,0 +1,385 @@ 
+/*
+ * EnBW Communication Module Compact board
+ * Copyright 2011 DENX Software Engineering GmbH
+ * Author: Heiko Schocher <hs@denx.de>
+ *
+ * based on:
+ * TI DA850/OMAP-L138 EVM board
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Derived from: arch/arm/mach-davinci/board-da850-evm.c
+ * Original Copyrights follow:
+ *
+ * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/console.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_net.h>
+#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/aemif.h>
+#include <mach/cp_intc.h>
+#include <mach/da8xx.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
+#include <mach/spi.h>
+
+#define ENBW_CMC_MMCSD_CD_PIN          GPIO_TO_PIN(3, 13)
+
+/*
+ * USB1 VBUS is controlled by GPIO7[12], over-current is reported on GPIO7[8].
+ */
+#define DA850_USB_VBUS_PIN	GPIO_TO_PIN(7, 12)
+#define ON_BD_USB_OVC		GPIO_TO_PIN(7, 8)
+
+#if defined(CONFIG_USB_OHCI_HCD)
+static irqreturn_t enbw_cmc_usb_ocic_irq(int irq, void *dev_id);
+static da8xx_ocic_handler_t enbw_cmc_usb_ocic_handler;
+
+static int enbw_cmc_usb_set_power(unsigned port, int on)
+{
+	gpio_set_value(DA850_USB_VBUS_PIN, on);
+	return 0;
+}
+
+static int enbw_cmc_usb_get_power(unsigned port)
+{
+	return gpio_get_value(DA850_USB_VBUS_PIN);
+}
+
+static int enbw_cmc_usb_get_oci(unsigned port)
+{
+	return !gpio_get_value(ON_BD_USB_OVC);
+}
+
+static irqreturn_t enbw_cmc_usb_ocic_irq(int, void *);
+
+static int enbw_cmc_usb_ocic_notify(da8xx_ocic_handler_t handler)
+{
+	int irq         = gpio_to_irq(ON_BD_USB_OVC);
+	int error       = 0;
+
+	if (handler != NULL) {
+		enbw_cmc_usb_ocic_handler = handler;
+
+		error = request_irq(irq, enbw_cmc_usb_ocic_irq,
+					IRQF_DISABLED | IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING,
+					"OHCI over-current indicator", NULL);
+		if (error)
+			pr_err("%s: could not request IRQ to watch "
+				"over-current indicator changes\n", __func__);
+	} else {
+		free_irq(irq, NULL);
+	}
+	return error;
+}
+
+static struct da8xx_ohci_root_hub enbw_cmc_usb11_pdata = {
+	.set_power      = enbw_cmc_usb_set_power,
+	.get_power      = enbw_cmc_usb_get_power,
+	.get_oci        = enbw_cmc_usb_get_oci,
+	.ocic_notify    = enbw_cmc_usb_ocic_notify,
+	.potpgt         = (10 + 1) / 2,  /* 10 ms max */
+};
+
+static irqreturn_t enbw_cmc_usb_ocic_irq(int irq, void *dev_id)
+{
+	enbw_cmc_usb_ocic_handler(&enbw_cmc_usb11_pdata, 1);
+	return IRQ_HANDLED;
+}
+#endif
+
+static __init void enbw_cmc_usb_init(void)
+{
+	int ret;
+	u32 cfgchip2;
+
+	/* Set up USB clock/mode in the CFGCHIP2 register. */
+	cfgchip2 = __raw_readl(DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* USB2.0 PHY reference clock is AUXCLK with 24MHz */
+	cfgchip2 &= ~CFGCHIP2_REFFREQ;
+	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
+
+	/*
+	 * Select internal reference clock for USB 2.0 PHY
+	 * and use it as a clock source for USB 1.1 PHY
+	 * (this is the default setting anyway).
+	 */
+	cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
+	cfgchip2 |=  CFGCHIP2_USB2PHYCLKMUX;
+
+	cfgchip2 &= ~CFGCHIP2_OTGMODE;
+	cfgchip2 |=  CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
+
+	__raw_writel(cfgchip2, DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/*
+	 * SP2525A @ 5V supplies 500mA,
+	 * with the power on to power good time of 10 ms.
+	 */
+	ret = da8xx_register_usb20(500, 10);
+	if (ret)
+		pr_warning("%s: USB 2.0 registration failed: %d\n",
+			   __func__, ret);
+
+#if defined(CONFIG_USB_OHCI_HCD)
+	ret = gpio_request_one(DA850_USB_VBUS_PIN,
+			GPIOF_DIR_OUT, "USB 1.1 VBUS");
+	if (ret < 0) {
+		pr_err("%s: failed to request GPIO for USB 1.1 port "
+			"power control: %d\n", __func__, ret);
+		return;
+	}
+	gpio_direction_input(DA850_USB_VBUS_PIN);
+
+	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
+	if (ret) {
+		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+		       "over-current indicator: %d\n", __func__, ret);
+		gpio_free(DA850_USB_VBUS_PIN);
+		return;
+	}
+	gpio_direction_input(ON_BD_USB_OVC);
+
+	ret = da8xx_register_usb11(&enbw_cmc_usb11_pdata);
+	if (ret) {
+		pr_warning("%s: USB 1.1 registration failed: %d\n",
+			   __func__, ret);
+		gpio_free(ON_BD_USB_OVC);
+		gpio_free(DA850_USB_VBUS_PIN);
+	}
+#endif
+
+	return;
+}
+
+static int enbw_cmc_mmc_get_ro(int index)
+{
+	return 0;
+}
+
+static int enbw_cmc_mmc_get_cd(int index)
+{
+	return gpio_get_value(ENBW_CMC_MMCSD_CD_PIN) ? 1 : 0;
+}
+
+static struct davinci_mmc_config enbw_cmc_mmc_config = {
+	.get_ro		= enbw_cmc_mmc_get_ro,
+	.get_cd		= enbw_cmc_mmc_get_cd,
+	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version	= MMC_CTLR_VERSION_2,
+};
+
+static int __init enbw_cmc_config_emac(void)
+{
+	void __iomem *cfg_chip3_base;
+	u32 val;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	if (!machine_is_enbw_cmc())
+		return 0;
+
+	cfg_chip3_base = DA8XX_SYSCFG0_VIRT(DA8XX_CFGCHIP3_REG);
+	val = __raw_readl(cfg_chip3_base);
+	val &= ~BIT(8);
+	pr_info("EMAC: MII PHY configured, RMII PHY will not be"
+						" functional\n");
+
+	/* configure the CFGCHIP3 register for MII */
+	__raw_writel(val, cfg_chip3_base);
+
+	/* use complete info from OF */
+	soc_info->emac_pdata = NULL;
+
+	return 0;
+}
+device_initcall(enbw_cmc_config_emac);
+
+static const s16 da850_dma0_rsv_chans[][2] = {
+	/* (offset, number) */
+	{-1, -1}
+};
+
+static const s16 da850_dma0_rsv_slots[][2] = {
+	/* (offset, number) */
+	{-1, -1}
+};
+
+static const s16 da850_dma1_rsv_chans[][2] = {
+	/* (offset, number) */
+	{-1, -1}
+};
+
+static const s16 da850_dma1_rsv_slots[][2] = {
+	/* (offset, number) */
+	{-1, -1}
+};
+
+static struct edma_rsv_info da850_edma_cc0_rsv = {
+	.rsv_chans	= da850_dma0_rsv_chans,
+	.rsv_slots	= da850_dma0_rsv_slots,
+};
+
+static struct edma_rsv_info da850_edma_cc1_rsv = {
+	.rsv_chans	= da850_dma1_rsv_chans,
+	.rsv_slots	= da850_dma1_rsv_slots,
+};
+
+static struct edma_rsv_info *da850_edma_rsv[2] = {
+	&da850_edma_cc0_rsv,
+	&da850_edma_cc1_rsv,
+};
+
+#ifdef CONFIG_CPU_FREQ
+static __init int da850_evm_init_cpufreq(void)
+{
+	switch (system_rev & 0xF) {
+	case 3:
+		da850_max_speed = 456000;
+		break;
+	case 2:
+		da850_max_speed = 408000;
+		break;
+	case 1:
+		da850_max_speed = 372000;
+		break;
+	}
+
+	return da850_register_cpufreq("pll0_sysclk3");
+}
+#else
+static __init int da850_evm_init_cpufreq(void) { return 0; }
+#endif
+
+struct of_dev_auxdata enbw_cmc_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "ti,davinci-wdt", NULL),
+	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01c22000, "i2c_davinci.1", NULL),
+	OF_DEV_AUXDATA("ti,davinci-i2c", 0x01e28000, "i2c_davinci.2", NULL),
+	OF_DEV_AUXDATA("ti,davinci-dm6467-emac", 0x01e20000, "davinci_emac.1",
+			NULL),
+	{}
+};
+
+const struct of_device_id enbw_cmc_bus_match_table[] = {
+	{ .compatible = "simple-bus", },
+	{ .compatible = "ti,da850", },
+	{ .compatible = "ti,davinci-onchipram", },
+	{ .compatible = "ti,davinci-aemif", },
+	{} /* Empty terminated list */
+};
+
+static __init void enbw_cmc_init(void)
+{
+	int ret;
+
+	of_platform_populate(NULL, enbw_cmc_bus_match_table,
+		enbw_cmc_auxdata_lookup, NULL);
+
+	ret = da8xx_register_watchdog();
+	if (ret)
+		pr_warning("enbw_cmc_init: watchdog registration failed: %d\n",
+				ret);
+
+	ret = da850_register_edma(da850_edma_rsv);
+	if (ret)
+		pr_warning("enbw_cmc_init: edma registration failed: %d\n",
+				ret);
+
+	/*
+	 * shut down uart 0 this port is not used on the board
+	 */
+	__raw_writel(0, IO_ADDRESS(DA8XX_UART0_BASE) + 0x30);
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("enbw_cmc_init: rtc setup failed: %d\n", ret);
+
+	ret = da850_evm_init_cpufreq();
+	if (ret)
+		pr_warning("enbw_cmc_init: cpufreq registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_cpuidle();
+	if (ret)
+		pr_warning("enbw_cmc_init: cpuidle registration failed: %d\n",
+				ret);
+
+	ret = gpio_request(ENBW_CMC_MMCSD_CD_PIN, "MMC CD\n");
+	if (ret)
+		pr_warning("enbw_cmc_init: can not open GPIO %d\n",
+				ENBW_CMC_MMCSD_CD_PIN);
+	gpio_direction_input(ENBW_CMC_MMCSD_CD_PIN);
+
+	ret = da850_register_mmcsd1(&enbw_cmc_mmc_config);
+	if (ret)
+		pr_warning("enbw_cmc_init: mmcsd1 registration failed:"
+				" %d\n", ret);
+
+	enbw_cmc_usb_init();
+}
+
+#ifdef CONFIG_SERIAL_8250_CONSOLE
+static int __init enbw_cmc_console_init(void)
+{
+	if (!machine_is_enbw_cmc())
+		return 0;
+
+	return add_preferred_console("ttyS", 2, "115200");
+}
+console_initcall(enbw_cmc_console_init);
+#endif
+
+static void __init enbw_cmc_map_io(void)
+{
+	da850_init();
+}
+
+static const char *enbw_cmc_board_compat[] __initconst = {
+	"enbw,cmc",
+	NULL
+};
+
+static struct of_device_id irq_of_match[] __initdata = {
+	{ .compatible = "ti,cp-intc", .data = cp_intc_of_init, },
+	{ }
+};
+
+static void __init cp_dt_init_irq(void)
+{
+	of_irq_init(irq_of_match);
+}
+
+MACHINE_START(ENBW_CMC, "EnBW CMC")
+	.map_io		= enbw_cmc_map_io,
+	.init_irq	= cp_dt_init_irq,
+	.timer		= &davinci_timer,
+	.init_machine	= enbw_cmc_init,
+	.dt_compat	= enbw_cmc_board_compat,
+	.dma_zone_size	= SZ_128M,
+	.restart	= da8xx_restart,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/include/mach/uncompress.h b/arch/arm/mach-davinci/include/mach/uncompress.h
index da2fb2c..6119543 100644
--- a/arch/arm/mach-davinci/include/mach/uncompress.h
+++ b/arch/arm/mach-davinci/include/mach/uncompress.h
@@ -98,6 +98,7 @@  static inline void __arch_decomp_setup(unsigned long arch_id)
 		DEBUG_LL_DA8XX(davinci_da850_evm,	2);
 		DEBUG_LL_DA8XX(mityomapl138,		1);
 		DEBUG_LL_DA8XX(omapl138_hawkboard,	2);
+		DEBUG_LL_DA8XX(enbw_cmc,		2);
 
 		/* TNETV107x boards */
 		DEBUG_LL_TNETV107X(tnetv107x,		1);