diff mbox

[v2,6/6] rt2x00: rt2800 - Make probe_hw function common between PCI and USB.

Message ID 1346433734-3337-7-git-send-email-gwingerde@gmail.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Gertjan van Wingerde Aug. 31, 2012, 5:22 p.m. UTC 
Refactor the probe_hw code so that more code can be shared between
rt2800pci and rt2800usb.

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>

Comments

Ivo van Doorn Sept. 2, 2012, 8:44 p.m. UTC | #1 
Hi,

> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
> index c3cae1d..2ad3b7a 100644
> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
> @@ -44,6 +44,13 @@
>  #include "rt2800.h"
>
>  /*
> + * Allow hardware encryption to be disabled.
> + */
> +static bool modparam_nohwcrypt = false;
> +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
> +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");

I am not particularly fond of this change, I would like to have the
module parameters inside the actual drivers instead of inside one of
the
library modules. I don't know if there is a policy for modules which
says something about these situations, but my preference would be
that the module parameters are inside rt2800pci and rt2800usb, and
that the value would be passed to rt2800lib.

If there is isn't a simple and clean way to do that, then we can take
this patch though...

Ivo
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Gertjan van Wingerde Sept. 3, 2012, 1:23 a.m. UTC | #2 
On 09/02/12 22:44, Ivo Van Doorn wrote:
> Hi,
> 
>> diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
>> index c3cae1d..2ad3b7a 100644
>> --- a/drivers/net/wireless/rt2x00/rt2800lib.c
>> +++ b/drivers/net/wireless/rt2x00/rt2800lib.c
>> @@ -44,6 +44,13 @@
>>  #include "rt2800.h"
>>
>>  /*
>> + * Allow hardware encryption to be disabled.
>> + */
>> +static bool modparam_nohwcrypt = false;
>> +module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
>> +MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
> 
> I am not particularly fond of this change, I would like to have the
> module parameters inside the actual drivers instead of inside one of
> the
> library modules. I don't know if there is a policy for modules which
> says something about these situations, but my preference would be
> that the module parameters are inside rt2800pci and rt2800usb, and
> that the value would be passed to rt2800lib.
> 
> If there is isn't a simple and clean way to do that, then we can take
> this patch though...
> 

Yeah, I wasn't a big fan of that part as well, but at the time couldn't
find a better solution. I do have a better solution now, though.
v3 of this patch will be posted soon.

---
Gertjan
--
To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c
index c3cae1d..2ad3b7a 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/rt2x00/rt2800lib.c
@@ -44,6 +44,13 @@ 
 #include "rt2800.h"
 
 /*
+ * Allow hardware encryption to be disabled.
+ */
+static bool modparam_nohwcrypt = false;
+module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
+MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
+
+/*
  * Register access.
  * All access to the CSR registers will go through the methods
  * rt2800_register_read and rt2800_register_write.
@@ -4391,7 +4398,7 @@  void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev)
 }
 EXPORT_SYMBOL_GPL(rt2800_read_eeprom_efuse);
 
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	struct rt2800_drv_data *drv_data = rt2x00dev->drv_data;
 	u16 word;
@@ -4399,6 +4406,11 @@  int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 	u8 default_lna_gain;
 
 	/*
+	 * Read the EEPROM.
+	 */
+	rt2800_read_eeprom(rt2x00dev);
+
+	/*
 	 * Start validation of the data that has been read.
 	 */
 	mac = rt2x00_eeprom_addr(rt2x00dev, EEPROM_MAC_ADDR_0);
@@ -4520,9 +4532,8 @@  int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2800_validate_eeprom);
 
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
+static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	u32 reg;
 	u16 value;
@@ -4680,7 +4691,6 @@  int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2800_init_eeprom);
 
 /*
  * RF value list for rt28xx
@@ -4823,7 +4833,7 @@  static const struct rf_channel rf_vals_3x[] = {
 	{173, 0x61, 0, 9},
 };
 
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
+static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 {
 	struct hw_mode_spec *spec = &rt2x00dev->spec;
 	struct channel_info *info;
@@ -4999,7 +5009,72 @@  int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2800_probe_hw_mode);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev)
+{
+	int retval;
+	u32 reg;
+
+	/*
+	 * Allocate eeprom data.
+	 */
+	retval = rt2800_validate_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	retval = rt2800_init_eeprom(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2800_register_read(rt2x00dev, GPIO_CTRL, &reg);
+	rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1);
+	rt2800_register_write(rt2x00dev, GPIO_CTRL, reg);
+
+	/*
+	 * Initialize hw specifications.
+	 */
+	retval = rt2800_probe_hw_mode(rt2x00dev);
+	if (retval)
+		return retval;
+
+	/*
+	 * Set device capabilities.
+	 */
+	__set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
+	__set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
+	if (!rt2x00_is_usb(rt2x00dev))
+		__set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
+
+	/*
+	 * Set device requirements.
+	 */
+	if (!rt2x00_is_soc(rt2x00dev))
+		__set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
+	if (!modparam_nohwcrypt)
+		__set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
+	__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
+	__set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
+	if (rt2x00_is_usb(rt2x00dev))
+		__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
+	else {
+		__set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
+		__set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
+	}
+
+	/*
+	 * Set the rssi offset.
+	 */
+	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2800_probe_hw);
 
 /*
  * IEEE80211 stack callback functions.
diff --git a/drivers/net/wireless/rt2x00/rt2800lib.h b/drivers/net/wireless/rt2x00/rt2800lib.h
index 18a0b67..303e177 100644
--- a/drivers/net/wireless/rt2x00/rt2800lib.h
+++ b/drivers/net/wireless/rt2x00/rt2800lib.h
@@ -43,6 +43,8 @@  struct rt2800_ops {
 			    const unsigned int offset,
 			    const struct rt2x00_field32 field, u32 *reg);
 
+	void (*read_eeprom)(struct rt2x00_dev *rt2x00dev);
+
 	int (*drv_write_firmware)(struct rt2x00_dev *rt2x00dev,
 				  const u8 *data, const size_t len);
 	int (*drv_init_registers)(struct rt2x00_dev *rt2x00dev);
@@ -114,6 +116,13 @@  static inline int rt2800_regbusy_read(struct rt2x00_dev *rt2x00dev,
 	return rt2800ops->regbusy_read(rt2x00dev, offset, field, reg);
 }
 
+static inline void rt2800_read_eeprom(struct rt2x00_dev *rt2x00dev)
+{
+	const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv;
+
+	rt2800ops->read_eeprom(rt2x00dev);
+}
+
 static inline int rt2800_drv_write_firmware(struct rt2x00_dev *rt2x00dev,
 					    const u8 *data, const size_t len)
 {
@@ -191,9 +200,8 @@  void rt2800_disable_radio(struct rt2x00_dev *rt2x00dev);
 
 int rt2800_efuse_detect(struct rt2x00_dev *rt2x00dev);
 void rt2800_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev);
-int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev);
-int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev);
+
+int rt2800_probe_hw(struct rt2x00_dev *rt2x00dev);
 
 void rt2800_get_tkip_seq(struct ieee80211_hw *hw, u8 hw_key_idx, u32 *iv32,
 			 u16 *iv16);
diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c
index 0965540..abfc876 100644
--- a/drivers/net/wireless/rt2x00/rt2800pci.c
+++ b/drivers/net/wireless/rt2x00/rt2800pci.c
@@ -47,13 +47,6 @@ 
 #include "rt2800.h"
 #include "rt2800pci.h"
 
-/*
- * Allow hardware encryption to be disabled.
- */
-static bool modparam_nohwcrypt = false;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-
 static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token)
 {
 	unsigned int i;
@@ -965,85 +958,14 @@  static irqreturn_t rt2800pci_interrupt(int irq, void *dev_instance)
 /*
  * Device probe functions.
  */
-static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev)
 {
-	/*
-	 * Read EEPROM into buffer
-	 */
 	if (rt2x00_is_soc(rt2x00dev))
 		rt2800pci_read_eeprom_soc(rt2x00dev);
 	else if (rt2800pci_efuse_detect(rt2x00dev))
 		rt2800pci_read_eeprom_efuse(rt2x00dev);
 	else
 		rt2800pci_read_eeprom_pci(rt2x00dev);
-
-	return rt2800_validate_eeprom(rt2x00dev);
-}
-
-static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
-{
-	int retval;
-	u32 reg;
-
-	/*
-	 * Allocate eeprom data.
-	 */
-	retval = rt2800pci_validate_eeprom(rt2x00dev);
-	if (retval)
-		return retval;
-
-	retval = rt2800_init_eeprom(rt2x00dev);
-	if (retval)
-		return retval;
-
-	/*
-	 * Enable rfkill polling by setting GPIO direction of the
-	 * rfkill switch GPIO pin correctly.
-	 */
-	rt2x00pci_register_read(rt2x00dev, GPIO_CTRL, &reg);
-	rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1);
-	rt2x00pci_register_write(rt2x00dev, GPIO_CTRL, reg);
-
-	/*
-	 * Initialize hw specifications.
-	 */
-	retval = rt2800_probe_hw_mode(rt2x00dev);
-	if (retval)
-		return retval;
-
-	/*
-	 * This device has multiple filters for control frames
-	 * and has a separate filter for PS Poll frames.
-	 */
-	__set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
-	__set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
-	/*
-	 * This device has a pre tbtt interrupt and thus fetches
-	 * a new beacon directly prior to transmission.
-	 */
-	__set_bit(CAPABILITY_PRE_TBTT_INTERRUPT, &rt2x00dev->cap_flags);
-
-	/*
-	 * This device requires firmware.
-	 */
-	if (!rt2x00_is_soc(rt2x00dev))
-		__set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_DMA, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_TASKLET_CONTEXT, &rt2x00dev->cap_flags);
-	if (!modparam_nohwcrypt)
-		__set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
-	__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
-
-	/*
-	 * Set the rssi offset.
-	 */
-	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
-
-	return 0;
 }
 
 static const struct ieee80211_ops rt2800pci_mac80211_ops = {
@@ -1081,6 +1003,7 @@  static const struct rt2800_ops rt2800pci_rt2800_ops = {
 	.register_multiread	= rt2x00pci_register_multiread,
 	.register_multiwrite	= rt2x00pci_register_multiwrite,
 	.regbusy_read		= rt2x00pci_regbusy_read,
+	.read_eeprom		= rt2800pci_read_eeprom,
 	.drv_write_firmware	= rt2800pci_write_firmware,
 	.drv_init_registers	= rt2800pci_init_registers,
 	.drv_get_txwi		= rt2800pci_get_txwi,
@@ -1093,7 +1016,7 @@  static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = {
 	.tbtt_tasklet		= rt2800pci_tbtt_tasklet,
 	.rxdone_tasklet		= rt2800pci_rxdone_tasklet,
 	.autowake_tasklet	= rt2800pci_autowake_tasklet,
-	.probe_hw		= rt2800pci_probe_hw,
+	.probe_hw		= rt2800_probe_hw,
 	.get_firmware_name	= rt2800pci_get_firmware_name,
 	.check_firmware		= rt2800_check_firmware,
 	.load_firmware		= rt2800_load_firmware,
diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c
index 5390632..dd0a41c 100644
--- a/drivers/net/wireless/rt2x00/rt2800usb.c
+++ b/drivers/net/wireless/rt2x00/rt2800usb.c
@@ -43,13 +43,6 @@ 
 #include "rt2800usb.h"
 
 /*
- * Allow hardware encryption to be disabled.
- */
-static bool modparam_nohwcrypt;
-module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO);
-MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption.");
-
-/*
  * Queue handlers.
  */
 static void rt2800usb_start_queue(struct data_queue *queue)
@@ -722,73 +715,27 @@  static void rt2800usb_fill_rxdone(struct queue_entry *entry,
 /*
  * Device probe functions.
  */
-static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
+static void rt2800usb_read_eeprom(struct rt2x00_dev *rt2x00dev)
 {
 	if (rt2800_efuse_detect(rt2x00dev))
 		rt2800_read_eeprom_efuse(rt2x00dev);
 	else
 		rt2x00usb_eeprom_read(rt2x00dev, rt2x00dev->eeprom,
 				      EEPROM_SIZE);
-
-	return rt2800_validate_eeprom(rt2x00dev);
 }
 
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
-	u32 reg;
 
-	/*
-	 * Allocate eeprom data.
-	 */
-	retval = rt2800usb_validate_eeprom(rt2x00dev);
+	retval = rt2800_probe_hw(rt2x00dev);
 	if (retval)
 		return retval;
 
-	retval = rt2800_init_eeprom(rt2x00dev);
-	if (retval)
-		return retval;
-
-	/*
-	 * Enable rfkill polling by setting GPIO direction of the
-	 * rfkill switch GPIO pin correctly.
-	 */
-	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL, &reg);
-	rt2x00_set_field32(&reg, GPIO_CTRL_DIR2, 1);
-	rt2x00usb_register_write(rt2x00dev, GPIO_CTRL, reg);
-
-	/*
-	 * Initialize hw specifications.
-	 */
-	retval = rt2800_probe_hw_mode(rt2x00dev);
-	if (retval)
-		return retval;
-
-	/*
-	 * This device has multiple filters for control frames
-	 * and has a separate filter for PS Poll frames.
-	 */
-	__set_bit(CAPABILITY_CONTROL_FILTERS, &rt2x00dev->cap_flags);
-	__set_bit(CAPABILITY_CONTROL_FILTER_PSPOLL, &rt2x00dev->cap_flags);
-
-	/*
-	 * This device requires firmware.
-	 */
-	__set_bit(REQUIRE_FIRMWARE, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_L2PAD, &rt2x00dev->cap_flags);
-	if (!modparam_nohwcrypt)
-		__set_bit(CAPABILITY_HW_CRYPTO, &rt2x00dev->cap_flags);
-	__set_bit(CAPABILITY_LINK_TUNING, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_TXSTATUS_FIFO, &rt2x00dev->cap_flags);
-	__set_bit(REQUIRE_PS_AUTOWAKE, &rt2x00dev->cap_flags);
-
-	rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout,
-
 	/*
-	 * Set the rssi offset.
+	 * Set txstatus timer function.
 	 */
-	rt2x00dev->rssi_offset = DEFAULT_RSSI_OFFSET;
+	rt2x00dev->txstatus_timer.function = rt2800usb_tx_sta_fifo_timeout;
 
 	/*
 	 * Overwrite TX done handler
@@ -834,6 +781,7 @@  static const struct rt2800_ops rt2800usb_rt2800_ops = {
 	.register_multiread	= rt2x00usb_register_multiread,
 	.register_multiwrite	= rt2x00usb_register_multiwrite,
 	.regbusy_read		= rt2x00usb_regbusy_read,
+	.read_eeprom		= rt2800usb_read_eeprom,
 	.drv_write_firmware	= rt2800usb_write_firmware,
 	.drv_init_registers	= rt2800usb_init_registers,
 	.drv_get_txwi		= rt2800usb_get_txwi,