diff mbox

[v9,4/4] sd: change to auto suspend mode

Message ID 1360051396-3080-5-git-send-email-aaron.lu@intel.com (mailing list archive)
State Not Applicable, archived
Headers show

Commit Message

Aaron Lu Feb. 5, 2013, 8:03 a.m. UTC
From: Lin Ming <ming.m.lin@intel.com>

Uses block layer runtime pm helper functions in
scsi_runtime_suspend/resume for devices that take advantage of it.

Remove scsi_autopm_* from sd open/release path and check_events path.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Aaron Lu <aaron.lu@intel.com>
---
 drivers/scsi/scsi_pm.c | 79 +++++++++++++++++++++++++++++++++++++++++---------
 drivers/scsi/sd.c      | 13 +--------
 2 files changed, 67 insertions(+), 25 deletions(-)

Comments

Alan Stern Feb. 5, 2013, 4:51 p.m. UTC | #1
On Tue, 5 Feb 2013, Aaron Lu wrote:

> From: Lin Ming <ming.m.lin@intel.com>
> 
> Uses block layer runtime pm helper functions in
> scsi_runtime_suspend/resume for devices that take advantage of it.
> 
> Remove scsi_autopm_* from sd open/release path and check_events path.

One thing is a little odd here...

> --- a/drivers/scsi/scsi_pm.c
> +++ b/drivers/scsi/scsi_pm.c
> @@ -144,33 +144,78 @@ static int scsi_bus_restore(struct device *dev)
>  
>  #ifdef CONFIG_PM_RUNTIME
>  
> +static int sdev_blk_runtime_suspend(struct scsi_device *sdev,
> +					int (*cb)(struct device *))
> +{
> +	int err;
> +
> +	err = blk_pre_runtime_suspend(sdev->request_queue);
> +	if (err)
> +		return err;
> +	if (cb)
> +		err = cb(&sdev->sdev_gendev);
> +	blk_post_runtime_suspend(sdev->request_queue, err);
> +
> +	return err;
> +}
> +
> +static int sdev_runtime_suspend(struct device *dev)
> +{
> +	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
> +	int (*cb)(struct device *) = pm ? pm->runtime_suspend : NULL;
> +	struct scsi_device *sdev = to_scsi_device(dev);
> +
> +	if (sdev->request_queue->dev)
> +		return sdev_blk_runtime_suspend(sdev, cb);
> +	else
> +		return scsi_dev_type_suspend(dev, cb);
> +}
> +
>  static int scsi_runtime_suspend(struct device *dev)
>  {
>  	int err = 0;
> -	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
>  
>  	dev_dbg(dev, "scsi_runtime_suspend\n");
> -	if (scsi_is_sdev_device(dev)) {
> -		err = scsi_dev_type_suspend(dev,
> -				pm ? pm->runtime_suspend : NULL);
> -		if (err == -EAGAIN)
> -			pm_schedule_suspend(dev, jiffies_to_msecs(
> -				round_jiffies_up_relative(HZ/10)));
> -	}
> +	if (scsi_is_sdev_device(dev))
> +		err = sdev_runtime_suspend(dev);

The "if (err == -EAGAIN)" test and the call to pm_schedule_suspend seem
to have been dropped since v8 of this series.  It looks like they ought
to be moved into sdev_runtime_suspend.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Aaron Lu Feb. 6, 2013, 2:10 a.m. UTC | #2
On 02/06/2013 12:51 AM, Alan Stern wrote:
> On Tue, 5 Feb 2013, Aaron Lu wrote:
> 
>> From: Lin Ming <ming.m.lin@intel.com>
>>
>> Uses block layer runtime pm helper functions in
>> scsi_runtime_suspend/resume for devices that take advantage of it.
>>
>> Remove scsi_autopm_* from sd open/release path and check_events path.
> 
> One thing is a little odd here...
> 
>> --- a/drivers/scsi/scsi_pm.c
>> +++ b/drivers/scsi/scsi_pm.c
>> @@ -144,33 +144,78 @@ static int scsi_bus_restore(struct device *dev)
>>  
>>  #ifdef CONFIG_PM_RUNTIME
>>  
>> +static int sdev_blk_runtime_suspend(struct scsi_device *sdev,
>> +					int (*cb)(struct device *))
>> +{
>> +	int err;
>> +
>> +	err = blk_pre_runtime_suspend(sdev->request_queue);
>> +	if (err)
>> +		return err;
>> +	if (cb)
>> +		err = cb(&sdev->sdev_gendev);
>> +	blk_post_runtime_suspend(sdev->request_queue, err);
>> +
>> +	return err;
>> +}
>> +
>> +static int sdev_runtime_suspend(struct device *dev)
>> +{
>> +	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
>> +	int (*cb)(struct device *) = pm ? pm->runtime_suspend : NULL;
>> +	struct scsi_device *sdev = to_scsi_device(dev);
>> +
>> +	if (sdev->request_queue->dev)
>> +		return sdev_blk_runtime_suspend(sdev, cb);
>> +	else
>> +		return scsi_dev_type_suspend(dev, cb);
>> +}
>> +
>>  static int scsi_runtime_suspend(struct device *dev)
>>  {
>>  	int err = 0;
>> -	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
>>  
>>  	dev_dbg(dev, "scsi_runtime_suspend\n");
>> -	if (scsi_is_sdev_device(dev)) {
>> -		err = scsi_dev_type_suspend(dev,
>> -				pm ? pm->runtime_suspend : NULL);
>> -		if (err == -EAGAIN)
>> -			pm_schedule_suspend(dev, jiffies_to_msecs(
>> -				round_jiffies_up_relative(HZ/10)));
>> -	}
>> +	if (scsi_is_sdev_device(dev))
>> +		err = sdev_runtime_suspend(dev);
> 
> The "if (err == -EAGAIN)" test and the call to pm_schedule_suspend seem
> to have been dropped since v8 of this series.  It looks like they ought
> to be moved into sdev_runtime_suspend.

I thought they were no longer needed...

For sd, we have request based rutime PM and the PM core will always try
to autosuspend the device with the timer; and for sr, the poll will
trigger suspend constantly. And for both, we don't return -EAGAIN anyway.
So I suppose that code is not necessary?

BTW, I'll be on vocation till 02/17, and I don't have access to the
internet in my hometown, but please feel free to drop any comments and
I'll check them when I get back.

Thanks,
Aaron

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alan Stern Feb. 6, 2013, 3:51 p.m. UTC | #3
On Wed, 6 Feb 2013, Aaron Lu wrote:

> > The "if (err == -EAGAIN)" test and the call to pm_schedule_suspend seem
> > to have been dropped since v8 of this series.  It looks like they ought
> > to be moved into sdev_runtime_suspend.
> 
> I thought they were no longer needed...

You did not mention this in the patch description.

> For sd, we have request based rutime PM and the PM core will always try
> to autosuspend the device with the timer; and for sr, the poll will
> trigger suspend constantly.

What if the poll has been disabled?

> And for both, we don't return -EAGAIN anyway.
> So I suppose that code is not necessary?

You could replace it with WARN_ON(err == -EAGAIN).  That way if some 
SCSI driver does return -EAGAIN in the future, people will know 
something is wrong.

> BTW, I'll be on vocation till 02/17, and I don't have access to the
> internet in my hometown, but please feel free to drop any comments and
> I'll check them when I get back.

I'm going on vacation next week too.  Enjoy your trip.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Aaron Lu Feb. 18, 2013, 3:20 a.m. UTC | #4
On Wed, Feb 06, 2013 at 10:51:19AM -0500, Alan Stern wrote:
> On Wed, 6 Feb 2013, Aaron Lu wrote:
> 
> > > The "if (err == -EAGAIN)" test and the call to pm_schedule_suspend seem
> > > to have been dropped since v8 of this series.  It looks like they ought
> > > to be moved into sdev_runtime_suspend.
> > 
> > I thought they were no longer needed...
> 
> You did not mention this in the patch description.

Sorry about that.

> 
> > For sd, we have request based rutime PM and the PM core will always try
> > to autosuspend the device with the timer; and for sr, the poll will
> > trigger suspend constantly.
> 
> What if the poll has been disabled?
> 
> > And for both, we don't return -EAGAIN anyway.
> > So I suppose that code is not necessary?
> 
> You could replace it with WARN_ON(err == -EAGAIN).  That way if some 
> SCSI driver does return -EAGAIN in the future, people will know 
> something is wrong.

Placing a WARN_ON there seems to suggest drivers should not return
-EAGAIN, so I think I'll just add back those dropped code to
sdev_runtime_suspend as you have suggested like this:

static int sdev_runtime_suspend(struct device *dev)
{
	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
	int (*cb)(struct device *) = pm ? pm->runtime_suspend : NULL;
	struct scsi_device *sdev = to_scsi_device(dev);
	int ret;

	if (sdev->request_queue->dev)
		return sdev_blk_runtime_suspend(sdev, cb);

	ret = scsi_dev_type_suspend(dev, cb);
	if (ret == -EAGAIN)
		pm_schedule_suspend(dev, jiffies_to_msecs(
					round_jiffies_up_relative(HZ/10)));
	return ret;
}

Does this look OK?

> 
> > BTW, I'll be on vocation till 02/17, and I don't have access to the
> > internet in my hometown, but please feel free to drop any comments and
> > I'll check them when I get back.
> 
> I'm going on vacation next week too.  Enjoy your trip.

Thanks, the trip was great.

-Aaron

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Alan Stern Feb. 18, 2013, 9:55 p.m. UTC | #5
On Mon, 18 Feb 2013, Aaron Lu wrote:

> Placing a WARN_ON there seems to suggest drivers should not return
> -EAGAIN, so I think I'll just add back those dropped code to
> sdev_runtime_suspend as you have suggested like this:
> 
> static int sdev_runtime_suspend(struct device *dev)
> {
> 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
> 	int (*cb)(struct device *) = pm ? pm->runtime_suspend : NULL;
> 	struct scsi_device *sdev = to_scsi_device(dev);
> 	int ret;
> 
> 	if (sdev->request_queue->dev)
> 		return sdev_blk_runtime_suspend(sdev, cb);
> 
> 	ret = scsi_dev_type_suspend(dev, cb);
> 	if (ret == -EAGAIN)
> 		pm_schedule_suspend(dev, jiffies_to_msecs(
> 					round_jiffies_up_relative(HZ/10)));
> 	return ret;
> }
> 
> Does this look OK?

Yes.

Alan Stern

--
To unsubscribe from this list: send the line "unsubscribe linux-pm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/scsi/scsi_pm.c b/drivers/scsi/scsi_pm.c
index 8f6b12c..01c6a2e 100644
--- a/drivers/scsi/scsi_pm.c
+++ b/drivers/scsi/scsi_pm.c
@@ -144,33 +144,78 @@  static int scsi_bus_restore(struct device *dev)
 
 #ifdef CONFIG_PM_RUNTIME
 
+static int sdev_blk_runtime_suspend(struct scsi_device *sdev,
+					int (*cb)(struct device *))
+{
+	int err;
+
+	err = blk_pre_runtime_suspend(sdev->request_queue);
+	if (err)
+		return err;
+	if (cb)
+		err = cb(&sdev->sdev_gendev);
+	blk_post_runtime_suspend(sdev->request_queue, err);
+
+	return err;
+}
+
+static int sdev_runtime_suspend(struct device *dev)
+{
+	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	int (*cb)(struct device *) = pm ? pm->runtime_suspend : NULL;
+	struct scsi_device *sdev = to_scsi_device(dev);
+
+	if (sdev->request_queue->dev)
+		return sdev_blk_runtime_suspend(sdev, cb);
+	else
+		return scsi_dev_type_suspend(dev, cb);
+}
+
 static int scsi_runtime_suspend(struct device *dev)
 {
 	int err = 0;
-	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
 
 	dev_dbg(dev, "scsi_runtime_suspend\n");
-	if (scsi_is_sdev_device(dev)) {
-		err = scsi_dev_type_suspend(dev,
-				pm ? pm->runtime_suspend : NULL);
-		if (err == -EAGAIN)
-			pm_schedule_suspend(dev, jiffies_to_msecs(
-				round_jiffies_up_relative(HZ/10)));
-	}
+	if (scsi_is_sdev_device(dev))
+		err = sdev_runtime_suspend(dev);
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
 	return err;
 }
 
-static int scsi_runtime_resume(struct device *dev)
+static int sdev_blk_runtime_resume(struct scsi_device *sdev,
+					int (*cb)(struct device *))
 {
 	int err = 0;
+
+	blk_pre_runtime_resume(sdev->request_queue);
+	if (cb)
+		err = cb(&sdev->sdev_gendev);
+	blk_post_runtime_resume(sdev->request_queue, err);
+
+	return err;
+}
+
+static int sdev_runtime_resume(struct device *dev)
+{
+	struct scsi_device *sdev = to_scsi_device(dev);
 	const struct dev_pm_ops *pm = dev->driver ? dev->driver->pm : NULL;
+	int (*cb)(struct device *) = pm ? pm->runtime_resume : NULL;
+
+	if (sdev->request_queue->dev)
+		return sdev_blk_runtime_resume(sdev, cb);
+	else
+		return scsi_dev_type_resume(dev, cb);
+}
+
+static int scsi_runtime_resume(struct device *dev)
+{
+	int err = 0;
 
 	dev_dbg(dev, "scsi_runtime_resume\n");
 	if (scsi_is_sdev_device(dev))
-		err = scsi_dev_type_resume(dev, pm ? pm->runtime_resume : NULL);
+		err = sdev_runtime_resume(dev);
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
@@ -185,10 +230,18 @@  static int scsi_runtime_idle(struct device *dev)
 
 	/* Insert hooks here for targets, hosts, and transport classes */
 
-	if (scsi_is_sdev_device(dev))
-		err = pm_schedule_suspend(dev, 100);
-	else
+	if (scsi_is_sdev_device(dev)) {
+		struct scsi_device *sdev = to_scsi_device(dev);
+
+		if (sdev->request_queue->dev) {
+			pm_runtime_mark_last_busy(dev);
+			err = pm_runtime_autosuspend(dev);
+		} else {
+			err = pm_runtime_suspend(dev);
+		}
+	} else {
 		err = pm_runtime_suspend(dev);
+	}
 	return err;
 }
 
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index c6e2b34..5000bec 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1121,10 +1121,6 @@  static int sd_open(struct block_device *bdev, fmode_t mode)
 
 	sdev = sdkp->device;
 
-	retval = scsi_autopm_get_device(sdev);
-	if (retval)
-		goto error_autopm;
-
 	/*
 	 * If the device is in error recovery, wait until it is done.
 	 * If the device is offline, then disallow any access to it.
@@ -1169,8 +1165,6 @@  static int sd_open(struct block_device *bdev, fmode_t mode)
 	return 0;
 
 error_out:
-	scsi_autopm_put_device(sdev);
-error_autopm:
 	scsi_disk_put(sdkp);
 	return retval;	
 }
@@ -1205,7 +1199,6 @@  static int sd_release(struct gendisk *disk, fmode_t mode)
 	 * XXX is followed by a "rmmod sd_mod"?
 	 */
 
-	scsi_autopm_put_device(sdev);
 	scsi_disk_put(sdkp);
 	return 0;
 }
@@ -1367,14 +1360,9 @@  static unsigned int sd_check_events(struct gendisk *disk, unsigned int clearing)
 	retval = -ENODEV;
 
 	if (scsi_block_when_processing_errors(sdp)) {
-		retval = scsi_autopm_get_device(sdp);
-		if (retval)
-			goto out;
-
 		sshdr  = kzalloc(sizeof(*sshdr), GFP_KERNEL);
 		retval = scsi_test_unit_ready(sdp, SD_TIMEOUT, SD_MAX_RETRIES,
 					      sshdr);
-		scsi_autopm_put_device(sdp);
 	}
 
 	/* failed to execute TUR, assume media not present */
@@ -2839,6 +2827,7 @@  static void sd_probe_async(void *data, async_cookie_t cookie)
 
 	sd_printk(KERN_NOTICE, sdkp, "Attached SCSI %sdisk\n",
 		  sdp->removable ? "removable " : "");
+	blk_pm_runtime_init(sdp->request_queue, dev);
 	scsi_autopm_put_device(sdp);
 	put_device(&sdkp->dev);
 }