Message ID | 20130314145246.GA13095@r-ufm5-17.mtr.labs.mlnx (mailing list archive) |
---|---|
State | Accepted, archived |
Delegated to: | Ira Weiny |
Headers | show |
On Thu, Mar 14, 2013 at 7:52 AM, Dan Ben Yosef <danby@mellanox.com> wrote: > 1) if use -G or -D option : we obtain sl before doing perf query. > 2) if no destination is given : we obtain sl for every pair source-destination. > 3) if no destination is given and use --skip-sl option : we don't obtain > sl to all nodes in the fabric,in this case sl=0 for all node pairs. > > Signed-off-by: Dan Ben Yosef <danby@mellanox.com> Thanks applied, Ira > --- > Changes since v4: > 1. changed the documentation for --skip-sl option > > doc/rst/ibqueryerrors.8.in.rst | 3 + > src/ibqueryerrors.c | 90 +++++++++++++++++++++++++++++++++++++++- > 2 files changed, 92 insertions(+), 1 deletions(-) > > diff --git a/doc/rst/ibqueryerrors.8.in.rst b/doc/rst/ibqueryerrors.8.in.rst > index 9a05e7b..196ab9d 100644 > --- a/doc/rst/ibqueryerrors.8.in.rst > +++ b/doc/rst/ibqueryerrors.8.in.rst > @@ -52,6 +52,9 @@ Specify an alternate threshold file. The default is @IBDIAG_CONFIG_PATH@/error_ > > **--ca** print data for CA's only > > +**--skip-sl** Use the default sl for queries. This is not recommended when > +using a QoS aware routing engine as it can cause a credit deadlock. > + > **--router** print data for routers only > > **--clear-errors -k** Clear error counters after read. > diff --git a/src/ibqueryerrors.c b/src/ibqueryerrors.c > index 076327c..15b7702 100644 > --- a/src/ibqueryerrors.c > +++ b/src/ibqueryerrors.c > @@ -55,11 +55,14 @@ > #include <infiniband/mad.h> > > #include "ibdiag_common.h" > +#include "ibdiag_sa.h" > > struct ibmad_port *ibmad_port; > static char *node_name_map_file = NULL; > static nn_map_t *node_name_map = NULL; > static char *load_cache_file = NULL; > +static uint16_t lid2sl_table[sizeof(uint8_t) * 1024 * 48] = { 0 }; > +static int obtain_sl = 1; > > int data_counters = 0; > int data_counters_only = 0; > @@ -78,6 +81,8 @@ unsigned clear_errors = 0, clear_counts = 0, details = 0; > #define PRINT_ROUTER 0x4 > #define PRINT_ALL 0xFF /* all nodes default flag */ > > +#define DEFAULT_HALF_WORLD_PR_TIMEOUT (3000) > + > struct { > int nodes_checked; > int bad_nodes; > @@ -93,6 +98,13 @@ static char *threshold_file = DEF_THRES_FILE; > uint8_t thresholds[1204] = { 0 }; > char * threshold_str = ""; > > +static unsigned valid_gid(ib_gid_t * gid) > +{ > + ib_gid_t zero_gid; > + memset(&zero_gid, 0, sizeof zero_gid); > + return memcmp(&zero_gid, gid, sizeof(*gid)); > +} > + > static void set_thres(char *name, uint32_t val) > { > int f; > @@ -298,6 +310,55 @@ static int print_summary(void) > return (summary.bad_ports); > } > > +static void insert_lid2sl_table(struct sa_query_result *r) > +{ > + unsigned int i; > + for (i = 0; i < r->result_cnt; i++) { > + ib_path_rec_t *p_pr = (ib_path_rec_t *)sa_get_query_rec(r->p_result_madw, i); > + lid2sl_table[cl_ntoh16(p_pr->dlid)] = ib_path_rec_sl(p_pr); > + } > +} > + > +static int path_record_query(ib_gid_t sgid,uint64_t dguid) > +{ > + ib_path_rec_t pr; > + ib_net64_t comp_mask = 0; > + uint8_t reversible = 0; > + struct sa_handle * h; > + > + h = sa_get_handle(); > + ibd_timeout = DEFAULT_HALF_WORLD_PR_TIMEOUT; > + memset(&pr, 0, sizeof(pr)); > + > + CHECK_AND_SET_GID(sgid, pr.sgid, PR, SGID); > + if(dguid) { > + mad_encode_field(&sgid, IB_GID_GUID_F, &dguid); > + CHECK_AND_SET_GID(sgid, pr.dgid, PR, DGID); > + } > + > + CHECK_AND_SET_VAL(1, 8, -1, pr.num_path, PR, NUMBPATH);/*to get only one PathRecord for each source and destination pair*/ > + CHECK_AND_SET_VAL(1, 8, -1, reversible, PR, REVERSIBLE);/*for a reversible path*/ > + pr.num_path |= reversible << 7; > + struct sa_query_result result; > + int ret = sa_query(h, IB_MAD_METHOD_GET_TABLE, > + (uint16_t)IB_SA_ATTR_PATHRECORD,0,cl_ntoh64(comp_mask),ibd_sakey, > + &pr, sizeof(pr), &result); > + if (ret) { > + fprintf(stderr, "Query SA failed: %s; sa call path_query failed\n", strerror(ret)); > + return ret; > + } > + if (result.status != IB_SA_MAD_STATUS_SUCCESS) { > + sa_report_err(result.status); > + ret = EIO; > + goto Exit; > + } > + > + insert_lid2sl_table(&result); > +Exit: > + sa_free_result_mad(&result); > + return ret; > +} > + > static int query_and_dump(char *buf, size_t size, ib_portid_t * portid, > ibnd_node_t * node, char *node_name, int portnum, > const char *attr_name, uint16_t attr_id, > @@ -447,6 +508,8 @@ static int query_cap_mask(ib_portid_t * portid, char *node_name, int portnum, > uint8_t pc[1024] = { 0 }; > uint16_t rc_cap_mask; > > + portid->sl = lid2sl_table[portid->lid]; > + > /* PerfMgt ClassPortInfo is a required attribute */ > if (!pma_query_via(pc, portid, portnum, ibd_timeout, CLASS_PORT_INFO, > ibmad_port)) { > @@ -474,6 +537,8 @@ static int print_data_cnts(ib_portid_t * portid, uint16_t cap_mask, > > memset(pc, 0, 1024); > > + portid->sl = lid2sl_table[portid->lid]; > + > if (cap_mask & (IB_PM_EXT_WIDTH_SUPPORTED | IB_PM_EXT_WIDTH_NOIETF_SUP)) { > if (!pma_query_via(pc, portid, portnum, ibd_timeout, > IB_GSI_PORT_COUNTERS_EXT, ibmad_port)) { > @@ -543,6 +608,8 @@ static int print_errors(ib_portid_t * portid, uint16_t cap_mask, > memset(pc, 0, 1024); > memset(pce, 0, 1024); > > + portid->sl = lid2sl_table[portid->lid]; > + > if (!pma_query_via(pc, portid, portnum, ibd_timeout, > IB_GSI_PORT_COUNTERS, ibmad_port)) { > IBWARN("IB_GSI_PORT_COUNTERS query failed on %s, %s port %d", > @@ -822,6 +889,9 @@ static int process_opt(void *context, int ch, char *optarg) > case 9: > data_counters_only = 1; > break; > + case 10: > + obtain_sl = 0; > + break; > case 'G': > case 'S': > port_guid_str = optarg; > @@ -856,8 +926,11 @@ int main(int argc, char **argv) > struct ibnd_config config = { 0 }; > int resolved = -1; > ib_portid_t portid = { 0 }; > + ib_portid_t self_portid = { 0 }; > int rc = 0; > ibnd_fabric_t *fabric = NULL; > + ib_gid_t self_gid; > + int port = 0; > > int mgmt_classes[4] = { IB_SMI_CLASS, IB_SMI_DIRECT_CLASS, IB_SA_CLASS, > IB_PERFORMANCE_CLASS > @@ -875,6 +948,7 @@ int main(int argc, char **argv) > "Same as \"-G\" for backward compatibility"}, > {"Direct", 'D', 1, "<dr_path>", > "report the node containing the port specified by <dr_path>"}, > + {"skip-sl", 10, 0, NULL,"don't obtain SL to all destinations"}, > {"report-port", 'r', 0, NULL, > "report port link information"}, > {"threshold-file", 8, 1, NULL, > @@ -931,6 +1005,11 @@ int main(int argc, char **argv) > exit(-1); > } > > + if (resolve_self(ibd_ca, ibd_ca_port, &self_portid, &port, &self_gid) < 0) { > + IBERROR("can't resolve self port %s", argv[0]); > + goto close_port; > + } > + > /* limit the scan the fabric around the target */ > if (dr_path) { > if ((resolved = > @@ -945,6 +1024,8 @@ int main(int argc, char **argv) > ibmad_port)) < 0) > IBWARN("Failed to resolve %s; attempting full scan", > port_guid_str); > + if(obtain_sl) > + lid2sl_table[portid.lid] = portid.sl; > } > > if (load_cache_file) { > @@ -994,11 +1075,18 @@ int main(int argc, char **argv) > > port = ibnd_find_port_guid(fabric, port_guid); > if (port) { > + if(obtain_sl) > + if(path_record_query(self_gid,port->guid)) > + goto destroy_fabric; > print_node(port->node, NULL); > } else > fprintf(stderr, "Failed to find node: %s\n", dr_path); > - } else > + } else { > + if(obtain_sl) > + if(path_record_query(self_gid,0)) > + goto destroy_fabric; > ibnd_iter_nodes(fabric, print_node, NULL); > + } > > rc = print_summary(); > if (rc) > -- > 1.7.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-rdma" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/doc/rst/ibqueryerrors.8.in.rst b/doc/rst/ibqueryerrors.8.in.rst index 9a05e7b..196ab9d 100644 --- a/doc/rst/ibqueryerrors.8.in.rst +++ b/doc/rst/ibqueryerrors.8.in.rst @@ -52,6 +52,9 @@ Specify an alternate threshold file. The default is @IBDIAG_CONFIG_PATH@/error_ **--ca** print data for CA's only +**--skip-sl** Use the default sl for queries. This is not recommended when +using a QoS aware routing engine as it can cause a credit deadlock. + **--router** print data for routers only **--clear-errors -k** Clear error counters after read. diff --git a/src/ibqueryerrors.c b/src/ibqueryerrors.c index 076327c..15b7702 100644 --- a/src/ibqueryerrors.c +++ b/src/ibqueryerrors.c @@ -55,11 +55,14 @@ #include <infiniband/mad.h> #include "ibdiag_common.h" +#include "ibdiag_sa.h" struct ibmad_port *ibmad_port; static char *node_name_map_file = NULL; static nn_map_t *node_name_map = NULL; static char *load_cache_file = NULL; +static uint16_t lid2sl_table[sizeof(uint8_t) * 1024 * 48] = { 0 }; +static int obtain_sl = 1; int data_counters = 0; int data_counters_only = 0; @@ -78,6 +81,8 @@ unsigned clear_errors = 0, clear_counts = 0, details = 0; #define PRINT_ROUTER 0x4 #define PRINT_ALL 0xFF /* all nodes default flag */ +#define DEFAULT_HALF_WORLD_PR_TIMEOUT (3000) + struct { int nodes_checked; int bad_nodes; @@ -93,6 +98,13 @@ static char *threshold_file = DEF_THRES_FILE; uint8_t thresholds[1204] = { 0 }; char * threshold_str = ""; +static unsigned valid_gid(ib_gid_t * gid) +{ + ib_gid_t zero_gid; + memset(&zero_gid, 0, sizeof zero_gid); + return memcmp(&zero_gid, gid, sizeof(*gid)); +} + static void set_thres(char *name, uint32_t val) { int f; @@ -298,6 +310,55 @@ static int print_summary(void) return (summary.bad_ports); } +static void insert_lid2sl_table(struct sa_query_result *r) +{ + unsigned int i; + for (i = 0; i < r->result_cnt; i++) { + ib_path_rec_t *p_pr = (ib_path_rec_t *)sa_get_query_rec(r->p_result_madw, i); + lid2sl_table[cl_ntoh16(p_pr->dlid)] = ib_path_rec_sl(p_pr); + } +} + +static int path_record_query(ib_gid_t sgid,uint64_t dguid) +{ + ib_path_rec_t pr; + ib_net64_t comp_mask = 0; + uint8_t reversible = 0; + struct sa_handle * h; + + h = sa_get_handle(); + ibd_timeout = DEFAULT_HALF_WORLD_PR_TIMEOUT; + memset(&pr, 0, sizeof(pr)); + + CHECK_AND_SET_GID(sgid, pr.sgid, PR, SGID); + if(dguid) { + mad_encode_field(&sgid, IB_GID_GUID_F, &dguid); + CHECK_AND_SET_GID(sgid, pr.dgid, PR, DGID); + } + + CHECK_AND_SET_VAL(1, 8, -1, pr.num_path, PR, NUMBPATH);/*to get only one PathRecord for each source and destination pair*/ + CHECK_AND_SET_VAL(1, 8, -1, reversible, PR, REVERSIBLE);/*for a reversible path*/ + pr.num_path |= reversible << 7; + struct sa_query_result result; + int ret = sa_query(h, IB_MAD_METHOD_GET_TABLE, + (uint16_t)IB_SA_ATTR_PATHRECORD,0,cl_ntoh64(comp_mask),ibd_sakey, + &pr, sizeof(pr), &result); + if (ret) { + fprintf(stderr, "Query SA failed: %s; sa call path_query failed\n", strerror(ret)); + return ret; + } + if (result.status != IB_SA_MAD_STATUS_SUCCESS) { + sa_report_err(result.status); + ret = EIO; + goto Exit; + } + + insert_lid2sl_table(&result); +Exit: + sa_free_result_mad(&result); + return ret; +} + static int query_and_dump(char *buf, size_t size, ib_portid_t * portid, ibnd_node_t * node, char *node_name, int portnum, const char *attr_name, uint16_t attr_id, @@ -447,6 +508,8 @@ static int query_cap_mask(ib_portid_t * portid, char *node_name, int portnum, uint8_t pc[1024] = { 0 }; uint16_t rc_cap_mask; + portid->sl = lid2sl_table[portid->lid]; + /* PerfMgt ClassPortInfo is a required attribute */ if (!pma_query_via(pc, portid, portnum, ibd_timeout, CLASS_PORT_INFO, ibmad_port)) { @@ -474,6 +537,8 @@ static int print_data_cnts(ib_portid_t * portid, uint16_t cap_mask, memset(pc, 0, 1024); + portid->sl = lid2sl_table[portid->lid]; + if (cap_mask & (IB_PM_EXT_WIDTH_SUPPORTED | IB_PM_EXT_WIDTH_NOIETF_SUP)) { if (!pma_query_via(pc, portid, portnum, ibd_timeout, IB_GSI_PORT_COUNTERS_EXT, ibmad_port)) { @@ -543,6 +608,8 @@ static int print_errors(ib_portid_t * portid, uint16_t cap_mask, memset(pc, 0, 1024); memset(pce, 0, 1024); + portid->sl = lid2sl_table[portid->lid]; + if (!pma_query_via(pc, portid, portnum, ibd_timeout, IB_GSI_PORT_COUNTERS, ibmad_port)) { IBWARN("IB_GSI_PORT_COUNTERS query failed on %s, %s port %d", @@ -822,6 +889,9 @@ static int process_opt(void *context, int ch, char *optarg) case 9: data_counters_only = 1; break; + case 10: + obtain_sl = 0; + break; case 'G': case 'S': port_guid_str = optarg; @@ -856,8 +926,11 @@ int main(int argc, char **argv) struct ibnd_config config = { 0 }; int resolved = -1; ib_portid_t portid = { 0 }; + ib_portid_t self_portid = { 0 }; int rc = 0; ibnd_fabric_t *fabric = NULL; + ib_gid_t self_gid; + int port = 0; int mgmt_classes[4] = { IB_SMI_CLASS, IB_SMI_DIRECT_CLASS, IB_SA_CLASS, IB_PERFORMANCE_CLASS @@ -875,6 +948,7 @@ int main(int argc, char **argv) "Same as \"-G\" for backward compatibility"}, {"Direct", 'D', 1, "<dr_path>", "report the node containing the port specified by <dr_path>"}, + {"skip-sl", 10, 0, NULL,"don't obtain SL to all destinations"}, {"report-port", 'r', 0, NULL, "report port link information"}, {"threshold-file", 8, 1, NULL, @@ -931,6 +1005,11 @@ int main(int argc, char **argv) exit(-1); } + if (resolve_self(ibd_ca, ibd_ca_port, &self_portid, &port, &self_gid) < 0) { + IBERROR("can't resolve self port %s", argv[0]); + goto close_port; + } + /* limit the scan the fabric around the target */ if (dr_path) { if ((resolved = @@ -945,6 +1024,8 @@ int main(int argc, char **argv) ibmad_port)) < 0) IBWARN("Failed to resolve %s; attempting full scan", port_guid_str); + if(obtain_sl) + lid2sl_table[portid.lid] = portid.sl; } if (load_cache_file) { @@ -994,11 +1075,18 @@ int main(int argc, char **argv) port = ibnd_find_port_guid(fabric, port_guid); if (port) { + if(obtain_sl) + if(path_record_query(self_gid,port->guid)) + goto destroy_fabric; print_node(port->node, NULL); } else fprintf(stderr, "Failed to find node: %s\n", dr_path); - } else + } else { + if(obtain_sl) + if(path_record_query(self_gid,0)) + goto destroy_fabric; ibnd_iter_nodes(fabric, print_node, NULL); + } rc = print_summary(); if (rc)
1) if use -G or -D option : we obtain sl before doing perf query. 2) if no destination is given : we obtain sl for every pair source-destination. 3) if no destination is given and use --skip-sl option : we don't obtain sl to all nodes in the fabric,in this case sl=0 for all node pairs. Signed-off-by: Dan Ben Yosef <danby@mellanox.com> --- Changes since v4: 1. changed the documentation for --skip-sl option doc/rst/ibqueryerrors.8.in.rst | 3 + src/ibqueryerrors.c | 90 +++++++++++++++++++++++++++++++++++++++- 2 files changed, 92 insertions(+), 1 deletions(-)