diff mbox

[3/3] ARM: dts: tegra: Add PCIe entry for cardhu

Message ID 1365435688-4179-3-git-send-email-jagarwal@nvidia.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Jay Agarwal April 8, 2013, 3:41 p.m. UTC
Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>

- Add PCIe node entry for cardhu
- Enable only root port 2
- Initialize regulators required for tegra30
- Based on git://gitorious.org/thierryreding/linux.git

 arch/arm/boot/dts/tegra30-cardhu.dtsi |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

Comments

Stephen Warren April 8, 2013, 6:32 p.m. UTC | #1
On 04/08/2013 09:41 AM, Jay Agarwal wrote:
> Signed-off-by: Jay Agarwal <jagarwal@nvidia.com>
> 
> - Add PCIe node entry for cardhu
> - Enable only root port 2
> - Initialize regulators required for tegra30

Initialize isn't correct; this change makes no changes to any regulator;
it simply includes the required regulator properties in the new node.

I think you'd want to re-write this patch description as:

Enable the PCIe controller on Cardhu. Only port 2 is connected on this
board. It is connected to the Ethernet controller in the dock.

> diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi

> +	pcie-controller {
...
>  	serial@70006000 {

It lookos like this node is added in the wrong place. Nodes should be
sorted based on reg property, and judging by the reg property for this
node in tegra30.dtsi in Thierry's branch, this should be the first node
in the Cardhu file.
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index d2fdf95..b64113e 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -137,6 +137,17 @@ 
 		};
 	};
 
+	pcie-controller {
+		status = "okay";
+		pex-clk-supply = <&pex_hvdd_3v3_reg>;
+		vdd-supply = <&ldo1_reg>;
+		avdd-supply = <&ldo2_reg>;
+
+		pci@3,0 {
+			status = "okay";
+		};
+	};
+
 	serial@70006000 {
 		status = "okay";
 	};