| Message ID | 1365098483-26821-2-git-send-email-juhosg@openwrt.org (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Bjorn Helgaas |
| Headers | show |
On Thu, Apr 4, 2013 at 12:01 PM, Gabor Juhos <juhosg@openwrt.org> wrote: > The of_node field of the device assigned to a > PCI bus is used during scanning of the PCI bus. > However on MIPS, the of_node field is assigned > only after the bus has been scanned. > > Implement the architecture specific version of > 'pcibios_get_phb_of_node'. Which ensures that the > PCI driver core will initialize the of_node field > before starting the scan. > > Also remove the local assignment of bus->dev.of_node, > it is not needed after the patch. > > Signed-off-by: Gabor Juhos <juhosg@openwrt.org> I removed the __weak annotation from include/linux/pci.h and applied this patch to my pci/gabor-get-of-node. Give it a try and make sure it solves your problem. If so, and Ralph approves, I can push both for v3.10. It should appear at http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/gabor-get-of-node soon. Or if you prefer, you can take them through the MIPS tree. Bjorn > --- > arch/mips/pci/pci.c | 8 +++++++- > 1 file changed, 7 insertions(+), 1 deletion(-) > > diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c > index 0872f12..594e60d 100644 > --- a/arch/mips/pci/pci.c > +++ b/arch/mips/pci/pci.c > @@ -115,7 +115,6 @@ static void pcibios_scanbus(struct pci_controller *hose) > pci_bus_assign_resources(bus); > pci_enable_bridges(bus); > } > - bus->dev.of_node = hose->of_node; > } > } > > @@ -169,6 +168,13 @@ void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node) > } > } > } > + > +struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) > +{ > + struct pci_controller *hose = bus->sysdata; > + > + return of_node_get(hose->of_node); > +} > #endif > > static DEFINE_MUTEX(pci_scan_mutex); > -- > 1.7.10 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2013.04.10. 18:31 keltezéssel, Bjorn Helgaas írta: > On Thu, Apr 4, 2013 at 12:01 PM, Gabor Juhos <juhosg@openwrt.org> wrote: >> The of_node field of the device assigned to a >> PCI bus is used during scanning of the PCI bus. >> However on MIPS, the of_node field is assigned >> only after the bus has been scanned. >> >> Implement the architecture specific version of >> 'pcibios_get_phb_of_node'. Which ensures that the >> PCI driver core will initialize the of_node field >> before starting the scan. >> >> Also remove the local assignment of bus->dev.of_node, >> it is not needed after the patch. >> >> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> > > I removed the __weak annotation from include/linux/pci.h and applied > this patch to my pci/gabor-get-of-node. Thank you! > Give it a try and make sure > it solves your problem. If so, and Ralph approves, I can push both > for v3.10. It should appear at > http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/gabor-get-of-node > soon. I have tried your patch on top of 3.9-rc6. The resulting kernel uses the architecture specific implementation, and it runs fine. $ mipsel-openwrt-linux-readelf -s arch/mips/pci/built-in.o \ drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node 93: 0000046c 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node 1433: 00012a2c 104 FUNC WEAK DEFAULT 2 pcibios_get_phb_of_node 31863: 001d4dbc 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node $ For completeness, I have compiled it for X64 and for powerpc as well. I did not try to run these kernels, but the output of readelf seems to be ok: $ readelf -s arch/x86/kernel/built-in.o drivers/pci/built-in.o vmlinux.o | \ grep pcibios_get_phb_of_node 2761: 000273a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node 1705: 00018770 77 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node 60364: 000278a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node $ $ powerpc-openwrt-linux-readelf -s arch/powerpc/kernel/built-in.o \ drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node 1002: 0000ca28 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node 1485: 0001453c 88 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node 28959: 0000d598 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node $ > Or if you prefer, you can take them through the MIPS tree. Either is fine. -Gabor -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Apr 11, 2013 at 11:32 AM, Gabor Juhos <juhosg@openwrt.org> wrote: > 2013.04.10. 18:31 keltezéssel, Bjorn Helgaas írta: >> On Thu, Apr 4, 2013 at 12:01 PM, Gabor Juhos <juhosg@openwrt.org> wrote: >>> The of_node field of the device assigned to a >>> PCI bus is used during scanning of the PCI bus. >>> However on MIPS, the of_node field is assigned >>> only after the bus has been scanned. >>> >>> Implement the architecture specific version of >>> 'pcibios_get_phb_of_node'. Which ensures that the >>> PCI driver core will initialize the of_node field >>> before starting the scan. >>> >>> Also remove the local assignment of bus->dev.of_node, >>> it is not needed after the patch. >>> >>> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> >> >> I removed the __weak annotation from include/linux/pci.h and applied >> this patch to my pci/gabor-get-of-node. > > Thank you! > >> Give it a try and make sure >> it solves your problem. If so, and Ralph approves, I can push both >> for v3.10. It should appear at >> http://git.kernel.org/cgit/linux/kernel/git/helgaas/pci.git/log/?h=pci/gabor-get-of-node >> soon. > > I have tried your patch on top of 3.9-rc6. The resulting kernel uses the > architecture specific implementation, and it runs fine. > > $ mipsel-openwrt-linux-readelf -s arch/mips/pci/built-in.o \ > drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node > 93: 0000046c 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node > 1433: 00012a2c 104 FUNC WEAK DEFAULT 2 pcibios_get_phb_of_node > 31863: 001d4dbc 12 FUNC GLOBAL DEFAULT 2 pcibios_get_phb_of_node > $ > > For completeness, I have compiled it for X64 and for powerpc as well. I did not > try to run these kernels, but the output of readelf seems to be ok: > > $ readelf -s arch/x86/kernel/built-in.o drivers/pci/built-in.o vmlinux.o | \ > grep pcibios_get_phb_of_node > 2761: 000273a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > 1705: 00018770 77 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node > 60364: 000278a0 86 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > $ > > $ powerpc-openwrt-linux-readelf -s arch/powerpc/kernel/built-in.o \ > drivers/pci/built-in.o vmlinux.o | grep pcibios_get_phb_of_node > 1002: 0000ca28 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > 1485: 0001453c 88 FUNC WEAK DEFAULT 1 pcibios_get_phb_of_node > 28959: 0000d598 12 FUNC GLOBAL DEFAULT 1 pcibios_get_phb_of_node > $ > >> Or if you prefer, you can take them through the MIPS tree. > > Either is fine. Thanks for checking these out! I put them in my "next" branch and pushed it, so they should appear in v3.10. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
2013.04.11. 19:35 keltezéssel, Bjorn Helgaas írta: > Thanks for checking these out! I put them in my "next" branch and > pushed it, so they should appear in v3.10. Great. Thank you! -Gabor -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index 0872f12..594e60d 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -115,7 +115,6 @@ static void pcibios_scanbus(struct pci_controller *hose) pci_bus_assign_resources(bus); pci_enable_bridges(bus); } - bus->dev.of_node = hose->of_node; } } @@ -169,6 +168,13 @@ void pci_load_of_ranges(struct pci_controller *hose, struct device_node *node) } } } + +struct device_node *pcibios_get_phb_of_node(struct pci_bus *bus) +{ + struct pci_controller *hose = bus->sysdata; + + return of_node_get(hose->of_node); +} #endif static DEFINE_MUTEX(pci_scan_mutex);
The of_node field of the device assigned to a PCI bus is used during scanning of the PCI bus. However on MIPS, the of_node field is assigned only after the bus has been scanned. Implement the architecture specific version of 'pcibios_get_phb_of_node'. Which ensures that the PCI driver core will initialize the of_node field before starting the scan. Also remove the local assignment of bus->dev.of_node, it is not needed after the patch. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> --- arch/mips/pci/pci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)