| Message ID | 49eb592e15aaec804f9c11ca132d2b85c516aefa.1380703263.git.agordeev@redhat.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Wed, Oct 02, 2013 at 12:49:11PM +0200, Alexander Gordeev wrote: > As result of recent re-design of the MSI/MSI-X interrupts enabling > pattern this driver has to be updated to use the new technique to > obtain a optimal number of MSI/MSI-X interrupts required. > > Signed-off-by: Alexander Gordeev <agordeev@redhat.com> > --- > drivers/ntb/ntb_hw.c | 41 +++++++++++++---------------------------- > drivers/ntb/ntb_hw.h | 2 -- > 2 files changed, 13 insertions(+), 30 deletions(-) > > diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c > index eccd5e5..7776429 100644 > --- a/drivers/ntb/ntb_hw.c > +++ b/drivers/ntb/ntb_hw.c > @@ -1032,23 +1032,26 @@ static int ntb_setup_msix(struct ntb_device *ndev) > struct msix_entry *msix; > int msix_entries; > int rc, i; > - u16 val; > > - if (!pdev->msix_cap) { > - rc = -EIO; > + rc = pci_msix_table_size(pdev); > + if (rc < 0) > goto err; > - } > > - rc = pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &val); > - if (rc) > + /* > + * On SNB, the link interrupt is always tied to 4th vector. If > + * we can't get all 4, then we can't use MSI-X. > + */ > + if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) { Please check for the HW type first, and then compare to ndev->limits.msix_cnt (which will be SNB_MSIX_CNT on SNB HW). Also, put the comment inside the if statement and remove the unecessary "()" around the comparisons. OCD on my part, but I like it that way. > + rc = -ENOSPC; > goto err; > - > - msix_entries = msix_table_size(val); > - if (msix_entries > ndev->limits.msix_cnt) { > + } else if... > + if (rc > ndev->limits.msix_cnt) { > rc = -EINVAL; > goto err; > } > > + msix_entries = rc; > + > ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries, > GFP_KERNEL); > if (!ndev->msix_entries) { > @@ -1060,26 +1063,8 @@ static int ntb_setup_msix(struct ntb_device *ndev) > ndev->msix_entries[i].entry = i; > > rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries); > - if (rc < 0) > + if (rc) > goto err1; > - if (rc > 0) { > - /* On SNB, the link interrupt is always tied to 4th vector. If > - * we can't get all 4, then we can't use MSI-X. > - */ > - if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) { > - rc = -EIO; > - goto err1; > - } > - > - dev_warn(&pdev->dev, > - "Only %d MSI-X vectors. Limiting the number of queues to that number.\n", > - rc); > - msix_entries = rc; > - > - rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries); > - if (rc) > - goto err1; > - } > > for (i = 0; i < msix_entries; i++) { > msix = &ndev->msix_entries[i]; > diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h > index 0a31ced..50bd760 100644 > --- a/drivers/ntb/ntb_hw.h > +++ b/drivers/ntb/ntb_hw.h > @@ -60,8 +60,6 @@ > #define PCI_DEVICE_ID_INTEL_NTB_SS_HSX 0x2F0F > #define PCI_DEVICE_ID_INTEL_NTB_B2B_BWD 0x0C4E > > -#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1) Good riddance! :-) > - > #ifndef readq > static inline u64 readq(void __iomem *addr) > { > -- > 1.7.7.6 > -- To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/ntb/ntb_hw.c b/drivers/ntb/ntb_hw.c index eccd5e5..7776429 100644 --- a/drivers/ntb/ntb_hw.c +++ b/drivers/ntb/ntb_hw.c @@ -1032,23 +1032,26 @@ static int ntb_setup_msix(struct ntb_device *ndev) struct msix_entry *msix; int msix_entries; int rc, i; - u16 val; - if (!pdev->msix_cap) { - rc = -EIO; + rc = pci_msix_table_size(pdev); + if (rc < 0) goto err; - } - rc = pci_read_config_word(pdev, pdev->msix_cap + PCI_MSIX_FLAGS, &val); - if (rc) + /* + * On SNB, the link interrupt is always tied to 4th vector. If + * we can't get all 4, then we can't use MSI-X. + */ + if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) { + rc = -ENOSPC; goto err; - - msix_entries = msix_table_size(val); - if (msix_entries > ndev->limits.msix_cnt) { + } + if (rc > ndev->limits.msix_cnt) { rc = -EINVAL; goto err; } + msix_entries = rc; + ndev->msix_entries = kmalloc(sizeof(struct msix_entry) * msix_entries, GFP_KERNEL); if (!ndev->msix_entries) { @@ -1060,26 +1063,8 @@ static int ntb_setup_msix(struct ntb_device *ndev) ndev->msix_entries[i].entry = i; rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries); - if (rc < 0) + if (rc) goto err1; - if (rc > 0) { - /* On SNB, the link interrupt is always tied to 4th vector. If - * we can't get all 4, then we can't use MSI-X. - */ - if ((rc < SNB_MSIX_CNT) && (ndev->hw_type != BWD_HW)) { - rc = -EIO; - goto err1; - } - - dev_warn(&pdev->dev, - "Only %d MSI-X vectors. Limiting the number of queues to that number.\n", - rc); - msix_entries = rc; - - rc = pci_enable_msix(pdev, ndev->msix_entries, msix_entries); - if (rc) - goto err1; - } for (i = 0; i < msix_entries; i++) { msix = &ndev->msix_entries[i]; diff --git a/drivers/ntb/ntb_hw.h b/drivers/ntb/ntb_hw.h index 0a31ced..50bd760 100644 --- a/drivers/ntb/ntb_hw.h +++ b/drivers/ntb/ntb_hw.h @@ -60,8 +60,6 @@ #define PCI_DEVICE_ID_INTEL_NTB_SS_HSX 0x2F0F #define PCI_DEVICE_ID_INTEL_NTB_B2B_BWD 0x0C4E -#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1) - #ifndef readq static inline u64 readq(void __iomem *addr) {
As result of recent re-design of the MSI/MSI-X interrupts enabling pattern this driver has to be updated to use the new technique to obtain a optimal number of MSI/MSI-X interrupts required. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> --- drivers/ntb/ntb_hw.c | 41 +++++++++++++---------------------------- drivers/ntb/ntb_hw.h | 2 -- 2 files changed, 13 insertions(+), 30 deletions(-)