Message ID | 20140714060334.GB2930@pratyush-vbox (mailing list archive) |
---|---|
State | New, archived |
Delegated to: | Bjorn Helgaas |
Headers | show |
On Monday, July 14, 2014 3:04 PM, Pratyush Anand wrote: > On Sat, Jul 12, 2014 at 04:36:29AM +0800, Murali Karicheri wrote: > > [...] > > > Murali Karicheri (6): > > PCI: designware: add rd[wr]_other_conf API > > PCI: designware: refactor MSI code to work with v3.65 dw hardware > > For above two you can add my reviewed-by: > > > PCI: designware: refactor host init code to re-use on keystone PCI > > PCI: designware: enhance dw core driver to support keystone PCI host > > In stead of using version number and then changing few functions from > static to global , I would have used same philosophy of adding callbacks > wherever needed. May be maintainers can give their view, instead of patch > 3 and 4 I would have gone with something like this, where kc_pcie can be > passed through pp->plat_data. I agree with your suggestion. I don't want to use the version number. The call back would be better. Best regards, Jingoo Han > > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index 905941c..b216192 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -490,16 +490,21 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > } > > if (IS_ENABLED(CONFIG_PCI_MSI)) { > - pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, > - MAX_MSI_IRQS, &msi_domain_ops, > - &dw_pcie_msi_chip); > - if (!pp->irq_domain) { > - dev_err(pp->dev, "irq domain init failed\n"); > - return -ENXIO; > - } > + if (!pp->ops->msi_init) { > + pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, > + MAX_MSI_IRQS, &msi_domain_ops, > + &dw_pcie_msi_chip); > + if (!pp->irq_domain) { > + dev_err(pp->dev, "irq domain init failed\n"); > + return -ENXIO; > + } > > - for (i = 0; i < MAX_MSI_IRQS; i++) > - irq_create_mapping(pp->irq_domain, i); > + for (i = 0; i < MAX_MSI_IRQS; i++) > + irq_create_mapping(pp->irq_domain, i); > + } else { > + pp->ops->msi_init(pp, &msi_domain_ops, > + &dw_pcie_msi_chip); > + } > } > > if (pp->ops->host_init) > @@ -759,6 +764,9 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) > BUG(); > } > > + if (bus && pp->ops->scan_bus) > + bus = pp->ops->scan_bus(pp); > + > return bus; > } > > diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h > index 387f69e..39ce496 100644 > --- a/drivers/pci/host/pcie-designware.h > +++ b/drivers/pci/host/pcie-designware.h > @@ -52,6 +52,7 @@ struct pcie_port { > struct irq_domain *irq_domain; > unsigned long msi_data; > DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS); > + void *plat_data; > }; > > struct pcie_host_ops { > @@ -70,6 +71,9 @@ struct pcie_host_ops { > void (*msi_set_irq)(struct pcie_port *pp, int irq); > void (*msi_clear_irq)(struct pcie_port *pp, int irq); > u32 (*get_msi_data)(struct pcie_port *pp); > + struct pci_bus *(*scan_bus)(struct pcie_port *pp); > + void (*msi_init) (struct pcie_port *pp, struct irq_domain_ops *ops, > + struct msi_chip *chip); > }; > > int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val); > > > ~Pratyush -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 07/14/2014 02:03 AM, Pratyush Anand wrote: > Oh.. I see my reply from gmail is not readable at all. (I forgot to > switch to plain text :( ) Please ignore last mail I am replying again > here. > > On Sat, Jul 12, 2014 at 04:36:29AM +0800, Murali Karicheri wrote: > > [...] > >> Murali Karicheri (6): >> PCI: designware: add rd[wr]_other_conf API >> PCI: designware: refactor MSI code to work with v3.65 dw hardware > > For above two you can add my reviewed-by: > >> PCI: designware: refactor host init code to re-use on keystone PCI >> PCI: designware: enhance dw core driver to support keystone PCI host > > In stead of using version number and then changing few functions from > static to global , I would have used same philosophy of adding callbacks > wherever needed. May be maintainers can give their view, instead of patch > 3 and 4 I would have gone with something like this, where kc_pcie can be > passed through pp->plat_data. > Pratyush, Thanks for the response. I will look into your proposal and respond back when I get a chance. Thanks and regards, Murali > diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c > index 905941c..b216192 100644 > --- a/drivers/pci/host/pcie-designware.c > +++ b/drivers/pci/host/pcie-designware.c > @@ -490,16 +490,21 @@ int __init dw_pcie_host_init(struct pcie_port *pp) > } > > if (IS_ENABLED(CONFIG_PCI_MSI)) { > - pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, > - MAX_MSI_IRQS,&msi_domain_ops, > -&dw_pcie_msi_chip); > - if (!pp->irq_domain) { > - dev_err(pp->dev, "irq domain init failed\n"); > - return -ENXIO; > - } > + if (!pp->ops->msi_init) { > + pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, > + MAX_MSI_IRQS,&msi_domain_ops, > +&dw_pcie_msi_chip); > + if (!pp->irq_domain) { > + dev_err(pp->dev, "irq domain init failed\n"); > + return -ENXIO; > + } > > - for (i = 0; i< MAX_MSI_IRQS; i++) > - irq_create_mapping(pp->irq_domain, i); > + for (i = 0; i< MAX_MSI_IRQS; i++) > + irq_create_mapping(pp->irq_domain, i); > + } else { > + pp->ops->msi_init(pp,&msi_domain_ops, > +&dw_pcie_msi_chip); > + } > } > > if (pp->ops->host_init) > @@ -759,6 +764,9 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) > BUG(); > } > > + if (bus&& pp->ops->scan_bus) > + bus = pp->ops->scan_bus(pp); > + > return bus; > } > > diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h > index 387f69e..39ce496 100644 > --- a/drivers/pci/host/pcie-designware.h > +++ b/drivers/pci/host/pcie-designware.h > @@ -52,6 +52,7 @@ struct pcie_port { > struct irq_domain *irq_domain; > unsigned long msi_data; > DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS); > + void *plat_data; > }; > > struct pcie_host_ops { > @@ -70,6 +71,9 @@ struct pcie_host_ops { > void (*msi_set_irq)(struct pcie_port *pp, int irq); > void (*msi_clear_irq)(struct pcie_port *pp, int irq); > u32 (*get_msi_data)(struct pcie_port *pp); > + struct pci_bus *(*scan_bus)(struct pcie_port *pp); > + void (*msi_init) (struct pcie_port *pp, struct irq_domain_ops *ops, > + struct msi_chip *chip); > }; > > int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val); > > > ~Pratyush -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c index 905941c..b216192 100644 --- a/drivers/pci/host/pcie-designware.c +++ b/drivers/pci/host/pcie-designware.c @@ -490,16 +490,21 @@ int __init dw_pcie_host_init(struct pcie_port *pp) } if (IS_ENABLED(CONFIG_PCI_MSI)) { - pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, - MAX_MSI_IRQS, &msi_domain_ops, - &dw_pcie_msi_chip); - if (!pp->irq_domain) { - dev_err(pp->dev, "irq domain init failed\n"); - return -ENXIO; - } + if (!pp->ops->msi_init) { + pp->irq_domain = irq_domain_add_linear(pp->dev->of_node, + MAX_MSI_IRQS, &msi_domain_ops, + &dw_pcie_msi_chip); + if (!pp->irq_domain) { + dev_err(pp->dev, "irq domain init failed\n"); + return -ENXIO; + } - for (i = 0; i < MAX_MSI_IRQS; i++) - irq_create_mapping(pp->irq_domain, i); + for (i = 0; i < MAX_MSI_IRQS; i++) + irq_create_mapping(pp->irq_domain, i); + } else { + pp->ops->msi_init(pp, &msi_domain_ops, + &dw_pcie_msi_chip); + } } if (pp->ops->host_init) @@ -759,6 +764,9 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys) BUG(); } + if (bus && pp->ops->scan_bus) + bus = pp->ops->scan_bus(pp); + return bus; } diff --git a/drivers/pci/host/pcie-designware.h b/drivers/pci/host/pcie-designware.h index 387f69e..39ce496 100644 --- a/drivers/pci/host/pcie-designware.h +++ b/drivers/pci/host/pcie-designware.h @@ -52,6 +52,7 @@ struct pcie_port { struct irq_domain *irq_domain; unsigned long msi_data; DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS); + void *plat_data; }; struct pcie_host_ops { @@ -70,6 +71,9 @@ struct pcie_host_ops { void (*msi_set_irq)(struct pcie_port *pp, int irq); void (*msi_clear_irq)(struct pcie_port *pp, int irq); u32 (*get_msi_data)(struct pcie_port *pp); + struct pci_bus *(*scan_bus)(struct pcie_port *pp); + void (*msi_init) (struct pcie_port *pp, struct irq_domain_ops *ops, + struct msi_chip *chip); }; int dw_pcie_cfg_read(void __iomem *addr, int where, int size, u32 *val);