[v2,0/2] ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888
mbox series

Message ID 0101016e82881a59-7429a45b-fae7-4499-8834-e9dfff0babb7-000000@us-west-2.amazonses.com
Headers show
Series
  • ath10k: correct tx bitrate for QCA6174/QCA9377/QCA9888
Related show

Message

Yu Wang Nov. 19, 2019, 7:19 a.m. UTC
Tx bitrate got by command 'iw wlan0 link' is incorrect.
These 2 patches will fix the issue.

Changes from v1:
[PATCH v2] ath10k: correct legacy rate in tx stats
Remove wmi ops for getting legacy rate, instead, update the ratecode got from
PPDU stats, to align with the existing tx rate processing.

Yu Wang (2):
  ath10k: add ppdu stats support for QCA6174/QCA9377
  ath10k: correct legacy rate in tx stats

 drivers/net/wireless/ath/ath10k/htt.c     |   2 +
 drivers/net/wireless/ath/ath10k/htt.h     |  30 ++++++
 drivers/net/wireless/ath/ath10k/htt_rx.c  | 146 +++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/mac.c     |   2 +-
 drivers/net/wireless/ath/ath10k/mac.h     |   1 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.c |   4 +
 drivers/net/wireless/ath/ath10k/wmi-tlv.h |   3 +
 7 files changed, 186 insertions(+), 2 deletions(-)