NTB: ntb_hw_switchtec: Fix peer BAR bug in switchtec_ntb_init_shared_mw
diff mbox

Message ID 1508271773-17827-1-git-send-email-dmeyer@gigaio.com
State New, archived
Headers show

Commit Message

dmeyer@gigaio.com Oct. 17, 2017, 8:22 p.m. UTC
From: Doug Meyer <dmeyer@gigaio.com>

This resolves a bug which may incorrectly configure the peer host's
LUT for shared memory window access. The code was using the local
host's first BAR number, rather than the peer hosts's first BAR
number, to determine what peer NT control register to program.

The bug will cause the Switchtec NTB link to work only if both peers
have the same first NTB BAR configured. In all other configurations,
the link will not come up, failing silently.

When both hosts have the same first BAR, the configuration works only
because the first BAR numbers happent to be the same. When the hosts
do not have the same first BAR, then the LUT translation will not be
configured in the correct peer LUT and will not give the peer the
shared memory window access required for the link to operate.

Signed-off-by: Doug Meyer <dmeyer@gigaio.com>
---
 drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

Comments

Jon Mason Oct. 17, 2017, 8:25 p.m. UTC | #1
On Tue, Oct 17, 2017 at 4:22 PM,  <dmeyer@gigaio.com> wrote:
> From: Doug Meyer <dmeyer@gigaio.com>
>
> This resolves a bug which may incorrectly configure the peer host's
> LUT for shared memory window access. The code was using the local
> host's first BAR number, rather than the peer hosts's first BAR
> number, to determine what peer NT control register to program.
>
> The bug will cause the Switchtec NTB link to work only if both peers
> have the same first NTB BAR configured. In all other configurations,
> the link will not come up, failing silently.
>
> When both hosts have the same first BAR, the configuration works only
> because the first BAR numbers happent to be the same. When the hosts
> do not have the same first BAR, then the LUT translation will not be
> configured in the correct peer LUT and will not give the peer the
> shared memory window access required for the link to operate.
>
> Signed-off-by: Doug Meyer <dmeyer@gigaio.com>

Looks good to me.  I'd prefer to have a "Fixes: " here, but I can add
it if there are no other objections to this patch.

Thanks,
Jon

> ---
>  drivers/ntb/hw/mscc/ntb_hw_switchtec.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
> index afe8ed6..ca0334a 100644
> --- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
> +++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
> @@ -964,7 +964,8 @@ static void switchtec_ntb_init_shared(struct switchtec_ntb *sndev)
>  static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
>  {
>         struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
> -       int bar = sndev->direct_mw_to_bar[0];
> +       int self_bar = sndev->direct_mw_to_bar[0];
> +       int peer_bar = sndev->peer_direct_mw_to_bar[0];
>         u32 ctl_val;
>         int rc;
>
> @@ -985,12 +986,12 @@ static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
>         if (rc)
>                 goto unalloc_and_exit;
>
> -       ctl_val = ioread32(&ctl->bar_entry[bar].ctl);
> +       ctl_val = ioread32(&ctl->bar_entry[peer_bar].ctl);
>         ctl_val &= 0xFF;
>         ctl_val |= NTB_CTRL_BAR_LUT_WIN_EN;
>         ctl_val |= ilog2(LUT_SIZE) << 8;
>         ctl_val |= (sndev->nr_lut_mw - 1) << 14;
> -       iowrite32(ctl_val, &ctl->bar_entry[bar].ctl);
> +       iowrite32(ctl_val, &ctl->bar_entry[peer_bar].ctl);
>
>         iowrite64((NTB_CTRL_LUT_EN | (sndev->self_partition << 1) |
>                    sndev->self_shared_dma),
> @@ -1009,7 +1010,7 @@ static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
>                 goto unalloc_and_exit;
>         }
>
> -       sndev->peer_shared = pci_iomap(sndev->stdev->pdev, bar, LUT_SIZE);
> +       sndev->peer_shared = pci_iomap(sndev->stdev->pdev, self_bar, LUT_SIZE);
>         if (!sndev->peer_shared) {
>                 rc = -ENOMEM;
>                 goto unalloc_and_exit;
> --
> 1.8.3.1
>
Logan Gunthorpe Oct. 17, 2017, 8:57 p.m. UTC | #2
On 17/10/17 02:25 PM, Jon Mason wrote:
>> Signed-off-by: Doug Meyer <dmeyer@gigaio.com>

Thanks Doug! This looks good to me.

Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: 678784a44ae8 ("NTB: switchtec_ntb: Initialize hardware for memory 
windows")


Logan

Patch
diff mbox

diff --git a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
index afe8ed6..ca0334a 100644
--- a/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
+++ b/drivers/ntb/hw/mscc/ntb_hw_switchtec.c
@@ -964,7 +964,8 @@  static void switchtec_ntb_init_shared(struct switchtec_ntb *sndev)
 static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
 {
 	struct ntb_ctrl_regs __iomem *ctl = sndev->mmio_peer_ctrl;
-	int bar = sndev->direct_mw_to_bar[0];
+	int self_bar = sndev->direct_mw_to_bar[0];
+	int peer_bar = sndev->peer_direct_mw_to_bar[0];
 	u32 ctl_val;
 	int rc;
 
@@ -985,12 +986,12 @@  static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
 	if (rc)
 		goto unalloc_and_exit;
 
-	ctl_val = ioread32(&ctl->bar_entry[bar].ctl);
+	ctl_val = ioread32(&ctl->bar_entry[peer_bar].ctl);
 	ctl_val &= 0xFF;
 	ctl_val |= NTB_CTRL_BAR_LUT_WIN_EN;
 	ctl_val |= ilog2(LUT_SIZE) << 8;
 	ctl_val |= (sndev->nr_lut_mw - 1) << 14;
-	iowrite32(ctl_val, &ctl->bar_entry[bar].ctl);
+	iowrite32(ctl_val, &ctl->bar_entry[peer_bar].ctl);
 
 	iowrite64((NTB_CTRL_LUT_EN | (sndev->self_partition << 1) |
 		   sndev->self_shared_dma),
@@ -1009,7 +1010,7 @@  static int switchtec_ntb_init_shared_mw(struct switchtec_ntb *sndev)
 		goto unalloc_and_exit;
 	}
 
-	sndev->peer_shared = pci_iomap(sndev->stdev->pdev, bar, LUT_SIZE);
+	sndev->peer_shared = pci_iomap(sndev->stdev->pdev, self_bar, LUT_SIZE);
 	if (!sndev->peer_shared) {
 		rc = -ENOMEM;
 		goto unalloc_and_exit;