@@ -860,6 +860,28 @@ static int ath10k_core_check_smbios(struct ath10k *ar)
return 0;
}
+static int ath10k_core_check_dt(struct ath10k *ar)
+{
+ struct device_node *node;
+ const char *variant = NULL;
+
+ node = ar->dev->of_node;
+ if (!node)
+ return -ENOENT;
+
+ of_property_read_string(node, "qcom,ath10k-calibration-variant",
+ &variant);
+ if (!variant)
+ return -ENODATA;
+
+ if (strscpy(ar->id.bdf_ext, variant, sizeof(ar->id.bdf_ext)) < 0)
+ ath10k_dbg(ar, ATH10K_DBG_BOOT,
+ "bdf variant string is longer than the buffer can accommodate (variant: %s)\n",
+ variant);
+
+ return 0;
+}
+
static int ath10k_download_and_run_otp(struct ath10k *ar)
{
u32 result, address = ar->hw_params.patch_load_addr;
@@ -1231,19 +1253,19 @@ static int ath10k_core_create_board_name(struct ath10k *ar, char *name,
/* strlen(',variant=') + strlen(ar->id.bdf_ext) */
char variant[9 + ATH10K_SMBIOS_BDF_EXT_STR_LENGTH] = { 0 };
+ if (ar->id.bdf_ext[0] != '\0')
+ scnprintf(variant, sizeof(variant), ",variant=%s",
+ ar->id.bdf_ext);
+
if (ar->id.bmi_ids_valid) {
scnprintf(name, name_len,
- "bus=%s,bmi-chip-id=%d,bmi-board-id=%d",
+ "bus=%s,bmi-chip-id=%d,bmi-board-id=%d%s",
ath10k_bus_str(ar->hif.bus),
ar->id.bmi_chip_id,
- ar->id.bmi_board_id);
+ ar->id.bmi_board_id, variant);
goto out;
}
- if (ar->id.bdf_ext[0] != '\0')
- scnprintf(variant, sizeof(variant), ",variant=%s",
- ar->id.bdf_ext);
-
scnprintf(name, name_len,
"bus=%s,vendor=%04x,device=%04x,subsystem-vendor=%04x,subsystem-device=%04x%s",
ath10k_bus_str(ar->hif.bus),
@@ -2343,7 +2365,11 @@ static int ath10k_core_probe_fw(struct ath10k *ar)
ret = ath10k_core_check_smbios(ar);
if (ret)
- ath10k_dbg(ar, ATH10K_DBG_BOOT, "bdf variant name not set.\n");
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "SMBIOS bdf variant name not set.\n");
+
+ ret = ath10k_core_check_dt(ar);
+ if (ret)
+ ath10k_dbg(ar, ATH10K_DBG_BOOT, "DT bdf variant name not set.\n");
ret = ath10k_core_fetch_board_file(ar);
if (ret) {
Board Data File (BDF) is loaded upon driver boot-up procedure. The right board data file is identified on QCA4019 using bus, bmi-chip-id and bmi-board-id. The problem, however, can occur when the (default) board data file cannot fulfill with the vendor requirements and it is necessary to use a different board data file. This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8. Something similar has to be provided for systems without SMBIOS but with device trees. No solution was specified by QCA and therefore a new one has to be found for ath10k. The device tree requires addition strings to define the variant name wifi@a000000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; wifi@a800000 { status = "okay"; qcom,ath10k-calibration-variant = "RT-AC58U"; }; This would create the boarddata identifiers for the board-2.bin search * bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U * bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com> --- drivers/net/wireless/ath/ath10k/core.c | 40 ++++++++++++++++++++++++++++------ 1 file changed, 33 insertions(+), 7 deletions(-)