[03/12] ath10k: Add ath10k QMI client driver
diff mbox

Message ID 1522042761-25716-1-git-send-email-govinds@codeaurora.org
State New
Headers show

Commit Message

Govind Singh March 26, 2018, 5:39 a.m. UTC
Add QMI client driver for Q6 integrated WLAN connectivity
subsystem. This module is responsible for communicating WLAN
control messages to FW over QUALCOMM MSM Interface (QMI).

Signed-off-by: Govind Singh <govinds@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/Kconfig  |   2 +-
 drivers/net/wireless/ath/ath10k/Makefile |   4 +
 drivers/net/wireless/ath/ath10k/qmi.c    | 121 +++++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/qmi.h    |  24 ++++++
 4 files changed, 150 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/ath/ath10k/qmi.c
 create mode 100644 drivers/net/wireless/ath/ath10k/qmi.h

Comments

Bjorn Andersson May 11, 2018, 5:25 p.m. UTC | #1
On Sun 25 Mar 22:39 PDT 2018, Govind Singh wrote:

> Add QMI client driver for Q6 integrated WLAN connectivity
> subsystem. This module is responsible for communicating WLAN
> control messages to FW over QUALCOMM MSM Interface (QMI).
> 
> Signed-off-by: Govind Singh <govinds@codeaurora.org>
> ---
>  drivers/net/wireless/ath/ath10k/Kconfig  |   2 +-
>  drivers/net/wireless/ath/ath10k/Makefile |   4 +
>  drivers/net/wireless/ath/ath10k/qmi.c    | 121 +++++++++++++++++++++++++++++++
>  drivers/net/wireless/ath/ath10k/qmi.h    |  24 ++++++
>  4 files changed, 150 insertions(+), 1 deletion(-)
>  create mode 100644 drivers/net/wireless/ath/ath10k/qmi.c
>  create mode 100644 drivers/net/wireless/ath/ath10k/qmi.h
> 
> diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
> index 84f071a..9978ad5e 100644
> --- a/drivers/net/wireless/ath/ath10k/Kconfig
> +++ b/drivers/net/wireless/ath/ath10k/Kconfig
> @@ -42,7 +42,7 @@ config ATH10K_USB
>  
>  config ATH10K_SNOC
>          tristate "Qualcomm ath10k SNOC support (EXPERIMENTAL)"
> -        depends on ATH10K && ARCH_QCOM
> +        depends on ATH10K && ARCH_QCOM && QCOM_QMI_HELPERS

QCOM_QMI_HELPERS is expected to be selected by the clients, so this
would be:

	select QCOM_QMI_HELPERS

>          ---help---
>            This module adds support for integrated WCN3990 chip connected
>            to system NOC(SNOC). Currently work in progress and will not
> diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
> index 44d60a6..1730d1d 100644
> --- a/drivers/net/wireless/ath/ath10k/Makefile
> +++ b/drivers/net/wireless/ath/ath10k/Makefile
> @@ -38,5 +38,9 @@ ath10k_usb-y += usb.o
>  obj-$(CONFIG_ATH10K_SNOC) += ath10k_snoc.o
>  ath10k_snoc-y += snoc.o
>  
> +obj-$(CONFIG_ATH10K_SNOC) += ath10k_qmi.o
> +ath10k_qmi-y += qmi.o \
> +		qmi_svc_v01.o
> +
>  # for tracing framework to find trace.h
>  CFLAGS_trace.o := -I$(src)
> diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
> new file mode 100644
> index 0000000..2235182
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath10k/qmi.c
> @@ -0,0 +1,121 @@
> +/*
> + * Copyright (c) 2018 The Linux Foundation. All rights reserved.
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + */

SPDX headers for new files please.

> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/debugfs.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/qrtr.h>
> +#include <linux/net.h>
> +#include <linux/completion.h>
> +#include <linux/idr.h>
> +#include <linux/string.h>
> +#include <net/sock.h>
> +#include <linux/soc/qcom/qmi.h>
> +#include "qmi.h"
> +#include "qmi_svc_v01.h"
> +
> +static struct ath10k_qmi *qmi;

Please design your code so that you don't depend on a global state
pointer.

> +
> +static int ath10k_qmi_new_server(struct qmi_handle *qmi_hdl,
> +				 struct qmi_service *service)
> +{
> +	return 0;
> +}
> +
> +static void ath10k_qmi_del_server(struct qmi_handle *qmi_hdl,
> +				  struct qmi_service *service)
> +{
> +}
> +
> +static struct qmi_ops ath10k_qmi_ops = {
> +	.new_server = ath10k_qmi_new_server,
> +	.del_server = ath10k_qmi_del_server,
> +};
> +
> +static int ath10k_qmi_probe(struct platform_device *pdev)
> +{
> +	int ret;
> +
> +	qmi = devm_kzalloc(&pdev->dev, sizeof(*qmi),
> +			   GFP_KERNEL);

This doesn't need to be line wrapped.

> +	if (!qmi)
> +		return -ENOMEM;
> +
> +	qmi->pdev = pdev;

The only place you use this is to access pdev->dev, so carry the struct
device * instead.

> +	platform_set_drvdata(pdev, qmi);
> +	ret = qmi_handle_init(&qmi->qmi_hdl,
> +			      WLFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_MSG_LEN,
> +			      &ath10k_qmi_ops, NULL);
> +	if (ret < 0)
> +		goto err;
> +
> +	ret = qmi_add_lookup(&qmi->qmi_hdl, WLFW_SERVICE_ID_V01,
> +			     WLFW_SERVICE_VERS_V01, 0);
> +	if (ret < 0)
> +		goto err;
> +
> +	pr_debug("qmi client driver probed successfully\n");

Rather than printing a line to indicate that your driver probed you can
check /sys/bus/platform/drivers/ath10k_QMI_client for for devices,
regardless of debug level.

> +
> +	return 0;

qmi_add_lookup() returns 0 on success, so you can have a common return,
preferably after renaming "err" to "out" or something that indicates
that it covers both cases.

> +
> +err:
> +	return ret;
> +}
> +
> +static int ath10k_qmi_remove(struct platform_device *pdev)
> +{
> +	struct ath10k_qmi *qmi = platform_get_drvdata(pdev);
> +
> +	qmi_handle_release(&qmi->qmi_hdl);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id ath10k_qmi_dt_match[] = {
> +	{.compatible = "qcom,ath10k-qmi"},
> +	{}
> +};
> +
> +MODULE_DEVICE_TABLE(of, ath10k_qmi_dt_match);
> +
> +static struct platform_driver ath10k_qmi_clinet = {

Spelling of "client".

> +	.probe  = ath10k_qmi_probe,
> +	.remove = ath10k_qmi_remove,
> +	.driver = {
> +		.name = "ath10k QMI client",
> +		.owner = THIS_MODULE,

platform_driver_register() will fill out .owner for you, so skip this.

> +		.of_match_table = ath10k_qmi_dt_match,
> +	},
> +};
> +
> +static int __init ath10k_qmi_init(void)
> +{
> +	return platform_driver_register(&ath10k_qmi_clinet);
> +}
> +
> +static void __exit ath10k_qmi_exit(void)
> +{
> +	platform_driver_unregister(&ath10k_qmi_clinet);
> +}
> +
> +module_init(ath10k_qmi_init);
> +module_exit(ath10k_qmi_exit);

Replace all this with:

module_platform_driver(ath10k_qmi_clinet);

> +
> +MODULE_AUTHOR("Qualcomm");
> +MODULE_LICENSE("Dual BSD/GPL");
> +MODULE_DESCRIPTION("ath10k QMI client driver");
> diff --git a/drivers/net/wireless/ath/ath10k/qmi.h b/drivers/net/wireless/ath/ath10k/qmi.h
> new file mode 100644
> index 0000000..ad256ef
> --- /dev/null
> +++ b/drivers/net/wireless/ath/ath10k/qmi.h
> @@ -0,0 +1,24 @@
> +/*
> + * Copyright (c) 2018 The Linux Foundation. All rights reserved.
> + *
> + * Permission to use, copy, modify, and/or distribute this software for any
> + * purpose with or without fee is hereby granted, provided that the above
> + * copyright notice and this permission notice appear in all copies.
> + *
> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
> + */

SPDX headers, please.

> +#ifndef _QMI_H_
> +#define _QMI_H_

This is not a good guard name, be more specific to avoid collisions.

> +
> +struct ath10k_qmi {

Afaict ath10k_qmi is not used outside "qmi.c", so there's no reason to
have it in a header file.

> +	struct platform_device *pdev;
> +	struct qmi_handle qmi_hdl;
> +	struct sockaddr_qrtr sq;

Add sq in the patch that actually uses it.

> +};
> +#endif /* _QMI_H_ */

Regards,
Bjorn
Govind Singh May 14, 2018, 12:05 p.m. UTC | #2
Hi Bjorn,
Thanks for the review.

On 2018-05-11 22:55, Bjorn Andersson wrote:
> On Sun 25 Mar 22:39 PDT 2018, Govind Singh wrote:
> 
>> Add QMI client driver for Q6 integrated WLAN connectivity
>> subsystem. This module is responsible for communicating WLAN
>> control messages to FW over QUALCOMM MSM Interface (QMI).
>> 
>> Signed-off-by: Govind Singh <govinds@codeaurora.org>
>> ---
>>  drivers/net/wireless/ath/ath10k/Kconfig  |   2 +-
>>  drivers/net/wireless/ath/ath10k/Makefile |   4 +
>>  drivers/net/wireless/ath/ath10k/qmi.c    | 121 
>> +++++++++++++++++++++++++++++++
>>  drivers/net/wireless/ath/ath10k/qmi.h    |  24 ++++++
>>  4 files changed, 150 insertions(+), 1 deletion(-)
>>  create mode 100644 drivers/net/wireless/ath/ath10k/qmi.c
>>  create mode 100644 drivers/net/wireless/ath/ath10k/qmi.h
>> 
>> diff --git a/drivers/net/wireless/ath/ath10k/Kconfig 
>> b/drivers/net/wireless/ath/ath10k/Kconfig
>> index 84f071a..9978ad5e 100644
>> --- a/drivers/net/wireless/ath/ath10k/Kconfig
>> +++ b/drivers/net/wireless/ath/ath10k/Kconfig
>> @@ -42,7 +42,7 @@ config ATH10K_USB
>> 
>>  config ATH10K_SNOC
>>          tristate "Qualcomm ath10k SNOC support (EXPERIMENTAL)"
>> -        depends on ATH10K && ARCH_QCOM
>> +        depends on ATH10K && ARCH_QCOM && QCOM_QMI_HELPERS
> 
> QCOM_QMI_HELPERS is expected to be selected by the clients, so this
> would be:
> 
> 	select QCOM_QMI_HELPERS

Sure, will do in next version.


>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE 
>> LIABLE FOR
>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY 
>> DAMAGES
>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 
>> AN
>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 
>> OUT OF
>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
>> + */
> 
> SPDX headers for new files please.
> 

Sure, will do in next version.


>> +static struct ath10k_qmi *qmi;
> 
> Please design your code so that you don't depend on a global state
> pointer.
> 

Actually i thought about this, i can save this in platform drvdata and 
get this at
run time by saving the pdev in qmi_service->priv.
But qmi_service is available only in new_server/del_server, but not in 
the qmi indication callbacks.
Qmi handle also does not have the reference to the qmi_service.
Can you pls suggest something here.

>> +
>> +static int ath10k_qmi_new_server(struct qmi_handle *qmi_hdl,
>> +				 struct qmi_service *service)
>> +{
>> +	return 0;
>> +}
>> +
>> +static void ath10k_qmi_del_server(struct qmi_handle *qmi_hdl,
>> +				  struct qmi_service *service)
>> +{
>> +}
>> +
>> +static struct qmi_ops ath10k_qmi_ops = {
>> +	.new_server = ath10k_qmi_new_server,
>> +	.del_server = ath10k_qmi_del_server,
>> +};
>> +
>> +static int ath10k_qmi_probe(struct platform_device *pdev)
>> +{
>> +	int ret;
>> +
>> +	qmi = devm_kzalloc(&pdev->dev, sizeof(*qmi),
>> +			   GFP_KERNEL);
> 
> This doesn't need to be line wrapped.
> 

Sure, will do in next version.

>> +	if (!qmi)
>> +		return -ENOMEM;
>> +
>> +	qmi->pdev = pdev;
> 
> The only place you use this is to access pdev->dev, so carry the struct
> device * instead.
> 

Sure, will do in next version.

>> +	platform_set_drvdata(pdev, qmi);
>> +	ret = qmi_handle_init(&qmi->qmi_hdl,
>> +			      WLFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_MSG_LEN,
>> +			      &ath10k_qmi_ops, NULL);
>> +	if (ret < 0)
>> +		goto err;
>> +
>> +	ret = qmi_add_lookup(&qmi->qmi_hdl, WLFW_SERVICE_ID_V01,
>> +			     WLFW_SERVICE_VERS_V01, 0);
>> +	if (ret < 0)
>> +		goto err;
>> +
>> +	pr_debug("qmi client driver probed successfully\n");
> 
> Rather than printing a line to indicate that your driver probed you can
> check /sys/bus/platform/drivers/ath10k_QMI_client for for devices,
> regardless of debug level.
> 

Sure, will do in next version.

>> +
>> +	return 0;
> 
> qmi_add_lookup() returns 0 on success, so you can have a common return,
> preferably after renaming "err" to "out" or something that indicates
> that it covers both cases.
> 
>> +
>> +err:
>> +	return ret;
>> +}
>> +
>> +static int ath10k_qmi_remove(struct platform_device *pdev)
>> +{
>> +	struct ath10k_qmi *qmi = platform_get_drvdata(pdev);
>> +
>> +	qmi_handle_release(&qmi->qmi_hdl);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct of_device_id ath10k_qmi_dt_match[] = {
>> +	{.compatible = "qcom,ath10k-qmi"},
>> +	{}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, ath10k_qmi_dt_match);
>> +
>> +static struct platform_driver ath10k_qmi_clinet = {
> 
> Spelling of "client".
> 

Sure, will do in next version.

>> +	.probe  = ath10k_qmi_probe,
>> +	.remove = ath10k_qmi_remove,
>> +	.driver = {
>> +		.name = "ath10k QMI client",
>> +		.owner = THIS_MODULE,
> 
> platform_driver_register() will fill out .owner for you, so skip this.
> 
>> +		.of_match_table = ath10k_qmi_dt_match,
>> +	},
>> +};
>> +
>> +static int __init ath10k_qmi_init(void)
>> +{
>> +	return platform_driver_register(&ath10k_qmi_clinet);
>> +}
>> +
>> +static void __exit ath10k_qmi_exit(void)
>> +{
>> +	platform_driver_unregister(&ath10k_qmi_clinet);
>> +}
>> +
>> +module_init(ath10k_qmi_init);
>> +module_exit(ath10k_qmi_exit);
> 
> Replace all this with:
> 

Sure, will do in next version.

> module_platform_driver(ath10k_qmi_clinet);
> 
>> +
>> +MODULE_AUTHOR("Qualcomm");
>> +MODULE_LICENSE("Dual BSD/GPL");
>> +MODULE_DESCRIPTION("ath10k QMI client driver");
>> diff --git a/drivers/net/wireless/ath/ath10k/qmi.h 
>> b/drivers/net/wireless/ath/ath10k/qmi.h
>> new file mode 100644
>> index 0000000..ad256ef
>> --- /dev/null
>> +++ b/drivers/net/wireless/ath/ath10k/qmi.h
>> @@ -0,0 +1,24 @@
>> +/*
>> + * Copyright (c) 2018 The Linux Foundation. All rights reserved.
>> + *
>> + * Permission to use, copy, modify, and/or distribute this software 
>> for any
>> + * purpose with or without fee is hereby granted, provided that the 
>> above
>> + * copyright notice and this permission notice appear in all copies.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL 
>> WARRANTIES
>> + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
>> + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE 
>> LIABLE FOR
>> + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY 
>> DAMAGES
>> + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN 
>> AN
>> + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING 
>> OUT OF
>> + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
>> + */
> 
> SPDX headers, please.
> 
>> +#ifndef _QMI_H_
>> +#define _QMI_H_
> 
> This is not a good guard name, be more specific to avoid collisions.
> 

Sure, will do in next version.

>> +
>> +struct ath10k_qmi {
> 
> Afaict ath10k_qmi is not used outside "qmi.c", so there's no reason to
> have it in a header file.
> 
>> +	struct platform_device *pdev;
>> +	struct qmi_handle qmi_hdl;
>> +	struct sockaddr_qrtr sq;
> 
> Add sq in the patch that actually uses it.
> 

Sure, will do in next version.

>> +};
>> +#endif /* _QMI_H_ */
> 
> Regards,
> Bjorn

Patch
diff mbox

diff --git a/drivers/net/wireless/ath/ath10k/Kconfig b/drivers/net/wireless/ath/ath10k/Kconfig
index 84f071a..9978ad5e 100644
--- a/drivers/net/wireless/ath/ath10k/Kconfig
+++ b/drivers/net/wireless/ath/ath10k/Kconfig
@@ -42,7 +42,7 @@  config ATH10K_USB
 
 config ATH10K_SNOC
         tristate "Qualcomm ath10k SNOC support (EXPERIMENTAL)"
-        depends on ATH10K && ARCH_QCOM
+        depends on ATH10K && ARCH_QCOM && QCOM_QMI_HELPERS
         ---help---
           This module adds support for integrated WCN3990 chip connected
           to system NOC(SNOC). Currently work in progress and will not
diff --git a/drivers/net/wireless/ath/ath10k/Makefile b/drivers/net/wireless/ath/ath10k/Makefile
index 44d60a6..1730d1d 100644
--- a/drivers/net/wireless/ath/ath10k/Makefile
+++ b/drivers/net/wireless/ath/ath10k/Makefile
@@ -38,5 +38,9 @@  ath10k_usb-y += usb.o
 obj-$(CONFIG_ATH10K_SNOC) += ath10k_snoc.o
 ath10k_snoc-y += snoc.o
 
+obj-$(CONFIG_ATH10K_SNOC) += ath10k_qmi.o
+ath10k_qmi-y += qmi.o \
+		qmi_svc_v01.o
+
 # for tracing framework to find trace.h
 CFLAGS_trace.o := -I$(src)
diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c
new file mode 100644
index 0000000..2235182
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/qmi.c
@@ -0,0 +1,121 @@ 
+/*
+ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/debugfs.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/qrtr.h>
+#include <linux/net.h>
+#include <linux/completion.h>
+#include <linux/idr.h>
+#include <linux/string.h>
+#include <net/sock.h>
+#include <linux/soc/qcom/qmi.h>
+#include "qmi.h"
+#include "qmi_svc_v01.h"
+
+static struct ath10k_qmi *qmi;
+
+static int ath10k_qmi_new_server(struct qmi_handle *qmi_hdl,
+				 struct qmi_service *service)
+{
+	return 0;
+}
+
+static void ath10k_qmi_del_server(struct qmi_handle *qmi_hdl,
+				  struct qmi_service *service)
+{
+}
+
+static struct qmi_ops ath10k_qmi_ops = {
+	.new_server = ath10k_qmi_new_server,
+	.del_server = ath10k_qmi_del_server,
+};
+
+static int ath10k_qmi_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	qmi = devm_kzalloc(&pdev->dev, sizeof(*qmi),
+			   GFP_KERNEL);
+	if (!qmi)
+		return -ENOMEM;
+
+	qmi->pdev = pdev;
+	platform_set_drvdata(pdev, qmi);
+	ret = qmi_handle_init(&qmi->qmi_hdl,
+			      WLFW_BDF_DOWNLOAD_REQ_MSG_V01_MAX_MSG_LEN,
+			      &ath10k_qmi_ops, NULL);
+	if (ret < 0)
+		goto err;
+
+	ret = qmi_add_lookup(&qmi->qmi_hdl, WLFW_SERVICE_ID_V01,
+			     WLFW_SERVICE_VERS_V01, 0);
+	if (ret < 0)
+		goto err;
+
+	pr_debug("qmi client driver probed successfully\n");
+
+	return 0;
+
+err:
+	return ret;
+}
+
+static int ath10k_qmi_remove(struct platform_device *pdev)
+{
+	struct ath10k_qmi *qmi = platform_get_drvdata(pdev);
+
+	qmi_handle_release(&qmi->qmi_hdl);
+
+	return 0;
+}
+
+static const struct of_device_id ath10k_qmi_dt_match[] = {
+	{.compatible = "qcom,ath10k-qmi"},
+	{}
+};
+
+MODULE_DEVICE_TABLE(of, ath10k_qmi_dt_match);
+
+static struct platform_driver ath10k_qmi_clinet = {
+	.probe  = ath10k_qmi_probe,
+	.remove = ath10k_qmi_remove,
+	.driver = {
+		.name = "ath10k QMI client",
+		.owner = THIS_MODULE,
+		.of_match_table = ath10k_qmi_dt_match,
+	},
+};
+
+static int __init ath10k_qmi_init(void)
+{
+	return platform_driver_register(&ath10k_qmi_clinet);
+}
+
+static void __exit ath10k_qmi_exit(void)
+{
+	platform_driver_unregister(&ath10k_qmi_clinet);
+}
+
+module_init(ath10k_qmi_init);
+module_exit(ath10k_qmi_exit);
+
+MODULE_AUTHOR("Qualcomm");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_DESCRIPTION("ath10k QMI client driver");
diff --git a/drivers/net/wireless/ath/ath10k/qmi.h b/drivers/net/wireless/ath/ath10k/qmi.h
new file mode 100644
index 0000000..ad256ef
--- /dev/null
+++ b/drivers/net/wireless/ath/ath10k/qmi.h
@@ -0,0 +1,24 @@ 
+/*
+ * Copyright (c) 2018 The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#ifndef _QMI_H_
+#define _QMI_H_
+
+struct ath10k_qmi {
+	struct platform_device *pdev;
+	struct qmi_handle qmi_hdl;
+	struct sockaddr_qrtr sq;
+};
+#endif /* _QMI_H_ */