diff mbox series

[rdma-next,v1,04/15] IB/mlx5: Set uid as part of SQ commands

Message ID 20180920183933.14771-5-leon@kernel.org (mailing list archive)
State Accepted
Delegated to: Jason Gunthorpe
Headers show
Series RDMA preparation to DevX extension part | expand

Commit Message

Leon Romanovsky Sept. 20, 2018, 6:39 p.m. UTC 
From: Yishai Hadas <yishaih@mellanox.com>

Set uid as part of SQ commands so that the firmware can manage the
SQ object in a secured way.

The uid for the destroy command is set by mlx5_core.

This will enable using an SQ that was created by verbs application
to be used by the DEVX flow in case the uid is equal.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
---
 drivers/infiniband/hw/mlx5/qp.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index fa6a0147210a..997e9bdf71ac 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -1116,6 +1116,7 @@  static int create_raw_packet_qp_sq(struct mlx5_ib_dev *dev,
 		goto err_umem;
 	}
 
+	MLX5_SET(create_sq_in, in, uid, to_mpd(pd)->uid);
 	sqc = MLX5_ADDR_OF(create_sq_in, in, ctx);
 	MLX5_SET(sqc, sqc, flush_in_error_en, 1);
 	if (MLX5_CAP_ETH(dev->mdev, multi_pkt_send_wqe))
@@ -2880,10 +2881,9 @@  static int modify_raw_packet_qp_rq(
 	return err;
 }
 
-static int modify_raw_packet_qp_sq(struct mlx5_core_dev *dev,
-				   struct mlx5_ib_sq *sq,
-				   int new_state,
-				   const struct mlx5_modify_raw_qp_param *raw_qp_param)
+static int modify_raw_packet_qp_sq(
+	struct mlx5_core_dev *dev, struct mlx5_ib_sq *sq, int new_state,
+	const struct mlx5_modify_raw_qp_param *raw_qp_param, struct ib_pd *pd)
 {
 	struct mlx5_ib_qp *ibqp = sq->base.container_mibqp;
 	struct mlx5_rate_limit old_rl = ibqp->rl;
@@ -2900,6 +2900,7 @@  static int modify_raw_packet_qp_sq(struct mlx5_core_dev *dev,
 	if (!in)
 		return -ENOMEM;
 
+	MLX5_SET(modify_sq_in, in, uid, to_mpd(pd)->uid);
 	MLX5_SET(modify_sq_in, in, sq_state, sq->state);
 
 	sqc = MLX5_ADDR_OF(modify_sq_in, in, ctx);
@@ -3016,7 +3017,8 @@  static int modify_raw_packet_qp(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
 				return err;
 		}
 
-		return modify_raw_packet_qp_sq(dev->mdev, sq, sq_state, raw_qp_param);
+		return modify_raw_packet_qp_sq(dev->mdev, sq, sq_state,
+					       raw_qp_param, qp->ibqp.pd);
 	}
 
 	return 0;