diff mbox series

ath10k: Set probe request oui during driver start

Message ID 1538503393-17543-1-git-send-email-pillair@codeaurora.org (mailing list archive)
State Accepted
Commit f1157695c527d4ee949ac83f743f80107751a70c
Delegated to: Kalle Valo
Headers show
Series ath10k: Set probe request oui during driver start | expand

Commit Message

Rakesh Pillai Oct. 2, 2018, 6:03 p.m. UTC
Currently the wmi command for setting probe request
oui, needed for mac randomization, is sent during
the mac register. At this time, during the driver
init the wmi has already been detached. This can
cause unexpected behavior since the firmware is
already down and the wmi has been detached.

Send the wmi command for setting probe request
oui during the driver start. This will make sure
that the firmware is started and wmi is initialized
before we send this command.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Fixes: 60e1d0fb290197fe505dff6e4e3b7e4d258dbf60
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/mac.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

Comments

Kalle Valo Oct. 13, 2018, 5:17 p.m. UTC | #1
Rakesh Pillai <pillair@codeaurora.org> wrote:

> Currently the wmi command for setting probe request
> oui, needed for mac randomization, is sent during
> the mac register. At this time, during the driver
> init the wmi has already been detached. This can
> cause unexpected behavior since the firmware is
> already down and the wmi has been detached.
> 
> Send the wmi command for setting probe request
> oui during the driver start. This will make sure
> that the firmware is started and wmi is initialized
> before we send this command.
> 
> Tested HW: WCN3990
> Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1
> 
> Fixes: 60e1d0fb290197fe505dff6e4e3b7e4d258dbf60
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

f1157695c527 ath10k: set probe request oui during driver start
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 97548f9..5e2f14b 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4682,6 +4682,14 @@  static int ath10k_start(struct ieee80211_hw *hw)
 		goto err_core_stop;
 	}
 
+	if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
+		ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
+		if (ret) {
+			ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
+			goto err_core_stop;
+		}
+	}
+
 	if (test_bit(WMI_SERVICE_ADAPTIVE_OCS, ar->wmi.svc_map)) {
 		ret = ath10k_wmi_adaptive_qcs(ar, true);
 		if (ret) {
@@ -8565,12 +8573,6 @@  int ath10k_mac_register(struct ath10k *ar)
 	}
 
 	if (test_bit(WMI_SERVICE_SPOOF_MAC_SUPPORT, ar->wmi.svc_map)) {
-		ret = ath10k_wmi_scan_prob_req_oui(ar, ar->mac_addr);
-		if (ret) {
-			ath10k_err(ar, "failed to set prob req oui: %i\n", ret);
-			goto err_dfs_detector_exit;
-		}
-
 		ar->hw->wiphy->features |=
 			NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
 	}