diff mbox series

[v4,5/6] usb: musb: Add musb_clearb/w() interface

Message ID 1548073351-13739-6-git-send-email-min.guo@mediatek.com (mailing list archive)
State New, archived
Headers show
Series Add MediaTek MUSB Controller Driver | expand

Commit Message

Min Guo Jan. 21, 2019, 12:22 p.m. UTC 
From: Min Guo <min.guo@mediatek.com>

Delete the const attribute of addr parameter in readb/w/l hooks, these
changes are for implementing clearing W1C registers.
Replace musb_readb/w with musb_clearb/w to clear the interrupt status.

Signed-off-by: Min Guo <min.guo@mediatek.com>
---
new patch based on v3:
---
 drivers/usb/musb/musb_core.c | 32 +++++++++++++++++++++++---------
 drivers/usb/musb/musb_core.h |  8 ++++++--
 drivers/usb/musb/musb_io.h   |  8 +++++---
 drivers/usb/musb/musbhsdma.c |  3 +++
 drivers/usb/musb/sunxi.c     |  4 ++--
 drivers/usb/musb/tusb6010.c  |  2 +-
 6 files changed, 40 insertions(+), 17 deletions(-)

Comments

Bin Liu Jan. 21, 2019, 3:59 p.m. UTC | #1 
Hi Min,

On Mon, Jan 21, 2019 at 08:22:30PM +0800, min.guo@mediatek.com wrote:
> From: Min Guo <min.guo@mediatek.com>
> 
> Delete the const attribute of addr parameter in readb/w/l hooks, these
> changes are for implementing clearing W1C registers.
> Replace musb_readb/w with musb_clearb/w to clear the interrupt status.
> 
> Signed-off-by: Min Guo <min.guo@mediatek.com>
> ---
> new patch based on v3:
> ---
>  drivers/usb/musb/musb_core.c | 32 +++++++++++++++++++++++---------
>  drivers/usb/musb/musb_core.h |  8 ++++++--
>  drivers/usb/musb/musb_io.h   |  8 +++++---
>  drivers/usb/musb/musbhsdma.c |  3 +++
>  drivers/usb/musb/sunxi.c     |  4 ++--
>  drivers/usb/musb/tusb6010.c  |  2 +-
>  6 files changed, 40 insertions(+), 17 deletions(-)
> 
> diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> index 2fe5225..5ef8848 100644
> --- a/drivers/usb/musb/musb_core.c
> +++ b/drivers/usb/musb/musb_core.c

[snip]

> diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
> index b2394a7..7bf91cb 100644
> --- a/drivers/usb/musb/musbhsdma.c
> +++ b/drivers/usb/musb/musbhsdma.c
> @@ -286,6 +286,9 @@ irqreturn_t dma_controller_irq(int irq, void *private_data)
>  
>  	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
>  
> +	/* clear pending interrupts by manual */
> +	musb_clearb(musb->mregs, MUSB_HSDMA_INTR);
> +

Make musb_clearb/w() return the value of the _read() instead of
_write(), so that we don't have to read twice here. The value of
_write() is not used anyway.

The change above can be:

	int_hsdma = musb_clearb(mbase, MUSB_HSDMA_INTR);

Please see my comments in 6/6 for details.

Regards,
-Bin.
Min Guo Jan. 22, 2019, 1:43 a.m. UTC | #2 
Hi Bin,

On Mon, 2019-01-21 at 09:59 -0600, Bin Liu wrote:
> Hi Min,
> 
> On Mon, Jan 21, 2019 at 08:22:30PM +0800, min.guo@mediatek.com wrote:
> > From: Min Guo <min.guo@mediatek.com>
> > 
> > Delete the const attribute of addr parameter in readb/w/l hooks, these
> > changes are for implementing clearing W1C registers.
> > Replace musb_readb/w with musb_clearb/w to clear the interrupt status.
> > 
> > Signed-off-by: Min Guo <min.guo@mediatek.com>
> > ---
> > new patch based on v3:
> > ---
> >  drivers/usb/musb/musb_core.c | 32 +++++++++++++++++++++++---------
> >  drivers/usb/musb/musb_core.h |  8 ++++++--
> >  drivers/usb/musb/musb_io.h   |  8 +++++---
> >  drivers/usb/musb/musbhsdma.c |  3 +++
> >  drivers/usb/musb/sunxi.c     |  4 ++--
> >  drivers/usb/musb/tusb6010.c  |  2 +-
> >  6 files changed, 40 insertions(+), 17 deletions(-)
> > 
> > diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
> > index 2fe5225..5ef8848 100644
> > --- a/drivers/usb/musb/musb_core.c
> > +++ b/drivers/usb/musb/musb_core.c
> 
> [snip]
> 
> > diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
> > index b2394a7..7bf91cb 100644
> > --- a/drivers/usb/musb/musbhsdma.c
> > +++ b/drivers/usb/musb/musbhsdma.c
> > @@ -286,6 +286,9 @@ irqreturn_t dma_controller_irq(int irq, void *private_data)
> >  
> >  	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
> >  
> > +	/* clear pending interrupts by manual */
> > +	musb_clearb(musb->mregs, MUSB_HSDMA_INTR);
> > +
> 
> Make musb_clearb/w() return the value of the _read() instead of
> _write(), so that we don't have to read twice here. The value of
> _write() is not used anyway.
> 
> The change above can be:
> 
> 	int_hsdma = musb_clearb(mbase, MUSB_HSDMA_INTR);
> 
> Please see my comments in 6/6 for details.

Okay.

> Regards,
> -Bin.
diff mbox series

Patch

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 2fe5225..5ef8848 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -246,7 +246,7 @@  static u32 musb_default_busctl_offset(u8 epnum, u16 offset)
 	return 0x80 + (0x08 * epnum) + offset;
 }
 
-static u8 musb_default_readb(const void __iomem *addr, unsigned offset)
+static u8 musb_default_readb(void __iomem *addr, unsigned offset)
 {
 	u8 data =  __raw_readb(addr + offset);
 
@@ -260,7 +260,7 @@  static void musb_default_writeb(void __iomem *addr, unsigned offset, u8 data)
 	__raw_writeb(data, addr + offset);
 }
 
-static u16 musb_default_readw(const void __iomem *addr, unsigned offset)
+static u16 musb_default_readw(void __iomem *addr, unsigned offset)
 {
 	u16 data = __raw_readw(addr + offset);
 
@@ -396,19 +396,25 @@  static void musb_default_read_fifo(struct musb_hw_ep *hw_ep, u16 len, u8 *dst)
 /*
  * Old style IO functions
  */
-u8 (*musb_readb)(const void __iomem *addr, unsigned offset);
+u8 (*musb_readb)(void __iomem *addr, unsigned offset);
 EXPORT_SYMBOL_GPL(musb_readb);
 
 void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
 EXPORT_SYMBOL_GPL(musb_writeb);
 
-u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
+u8 (*musb_clearb)(void __iomem *addr, unsigned int offset);
+EXPORT_SYMBOL_GPL(musb_clearb);
+
+u16 (*musb_readw)(void __iomem *addr, unsigned offset);
 EXPORT_SYMBOL_GPL(musb_readw);
 
 void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
 EXPORT_SYMBOL_GPL(musb_writew);
 
-u32 musb_readl(const void __iomem *addr, unsigned offset)
+u16 (*musb_clearw)(void __iomem *addr, unsigned int offset);
+EXPORT_SYMBOL_GPL(musb_clearw);
+
+u32 musb_readl(void __iomem *addr, unsigned offset)
 {
 	u32 data = __raw_readl(addr + offset);
 
@@ -1047,7 +1053,6 @@  static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb,
 static void musb_disable_interrupts(struct musb *musb)
 {
 	void __iomem	*mbase = musb->mregs;
-	u16	temp;
 
 	/* disable interrupts */
 	musb_writeb(mbase, MUSB_INTRUSBE, 0);
@@ -1057,9 +1062,9 @@  static void musb_disable_interrupts(struct musb *musb)
 	musb_writew(mbase, MUSB_INTRRXE, 0);
 
 	/*  flush pending interrupts */
-	temp = musb_readb(mbase, MUSB_INTRUSB);
-	temp = musb_readw(mbase, MUSB_INTRTX);
-	temp = musb_readw(mbase, MUSB_INTRRX);
+	musb_clearb(mbase, MUSB_INTRUSB);
+	musb_clearw(mbase, MUSB_INTRTX);
+	musb_clearw(mbase, MUSB_INTRRX);
 }
 
 static void musb_enable_interrupts(struct musb *musb)
@@ -2284,10 +2289,19 @@  static void musb_deassert_reset(struct work_struct *work)
 		musb_readb = musb->ops->readb;
 	if (musb->ops->writeb)
 		musb_writeb = musb->ops->writeb;
+	if (musb->ops->clearb)
+		musb_clearb = musb->ops->clearb;
+	else
+		musb_clearb = musb_readb;
+
 	if (musb->ops->readw)
 		musb_readw = musb->ops->readw;
 	if (musb->ops->writew)
 		musb_writew = musb->ops->writew;
+	if (musb->ops->clearw)
+		musb_clearw = musb->ops->clearw;
+	else
+		musb_clearw = musb_readw;
 
 #ifndef CONFIG_MUSB_PIO_ONLY
 	if (!musb->ops->dma_init || !musb->ops->dma_exit) {
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9f5a69c..0d9a35f 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -120,8 +120,10 @@  enum musb_g_ep0_state {
  * @fifo_offset: returns the fifo offset
  * @readb:	read 8 bits
  * @writeb:	write 8 bits
+ * @clearb:	could be clear-on-readb or W1C
  * @readw:	read 16 bits
  * @writew:	write 16 bits
+ * @clearw:	could be clear-on-readw or W1C
  * @read_fifo:	reads the fifo
  * @write_fifo:	writes to fifo
  * @get_toggle:	platform specific get toggle function
@@ -164,10 +166,12 @@  struct musb_platform_ops {
 	u16	fifo_mode;
 	u32	(*fifo_offset)(u8 epnum);
 	u32	(*busctl_offset)(u8 epnum, u16 offset);
-	u8	(*readb)(const void __iomem *addr, unsigned offset);
+	u8	(*readb)(void __iomem *addr, unsigned offset);
 	void	(*writeb)(void __iomem *addr, unsigned offset, u8 data);
-	u16	(*readw)(const void __iomem *addr, unsigned offset);
+	u8	(*clearb)(void __iomem *addr, unsigned int offset);
+	u16	(*readw)(void __iomem *addr, unsigned offset);
 	void	(*writew)(void __iomem *addr, unsigned offset, u16 data);
+	u16	(*clearw)(void __iomem *addr, unsigned int offset);
 	void	(*read_fifo)(struct musb_hw_ep *hw_ep, u16 len, u8 *buf);
 	void	(*write_fifo)(struct musb_hw_ep *hw_ep, u16 len, const u8 *buf);
 	u16	(*get_toggle)(struct musb_qh *qh, int is_out);
diff --git a/drivers/usb/musb/musb_io.h b/drivers/usb/musb/musb_io.h
index 8179334..7200596 100644
--- a/drivers/usb/musb/musb_io.h
+++ b/drivers/usb/musb/musb_io.h
@@ -37,11 +37,13 @@  struct musb_io {
 };
 
 /* Do not add new entries here, add them the struct musb_io instead */
-extern u8 (*musb_readb)(const void __iomem *addr, unsigned offset);
+extern u8 (*musb_readb)(void __iomem *addr, unsigned offset);
 extern void (*musb_writeb)(void __iomem *addr, unsigned offset, u8 data);
-extern u16 (*musb_readw)(const void __iomem *addr, unsigned offset);
+extern u8 (*musb_clearb)(void __iomem *addr, unsigned int offset);
+extern u16 (*musb_readw)(void __iomem *addr, unsigned offset);
 extern void (*musb_writew)(void __iomem *addr, unsigned offset, u16 data);
-extern u32 musb_readl(const void __iomem *addr, unsigned offset);
+extern u16 (*musb_clearw)(void __iomem *addr, unsigned int offset);
+extern u32 musb_readl(void __iomem *addr, unsigned offset);
 extern void musb_writel(void __iomem *addr, unsigned offset, u32 data);
 
 #endif
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index b2394a7..7bf91cb 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -286,6 +286,9 @@  irqreturn_t dma_controller_irq(int irq, void *private_data)
 
 	int_hsdma = musb_readb(mbase, MUSB_HSDMA_INTR);
 
+	/* clear pending interrupts by manual */
+	musb_clearb(musb->mregs, MUSB_HSDMA_INTR);
+
 	if (!int_hsdma) {
 		musb_dbg(musb, "spurious DMA irq");
 
diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c
index 832a41f..2c1bbaa 100644
--- a/drivers/usb/musb/sunxi.c
+++ b/drivers/usb/musb/sunxi.c
@@ -407,7 +407,7 @@  static u32 sunxi_musb_busctl_offset(u8 epnum, u16 offset)
 	return SUNXI_MUSB_TXFUNCADDR + offset;
 }
 
-static u8 sunxi_musb_readb(const void __iomem *addr, unsigned offset)
+static u8 sunxi_musb_readb(void __iomem *addr, unsigned offset)
 {
 	struct sunxi_glue *glue;
 
@@ -520,7 +520,7 @@  static void sunxi_musb_writeb(void __iomem *addr, unsigned offset, u8 data)
 		(int)(addr - sunxi_musb->mregs));
 }
 
-static u16 sunxi_musb_readw(const void __iomem *addr, unsigned offset)
+static u16 sunxi_musb_readw(void __iomem *addr, unsigned offset)
 {
 	if (addr == sunxi_musb->mregs) {
 		/* generic control or fifo control reg access */
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 3945328..cfb94f9 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -142,7 +142,7 @@  static void tusb_ep_select(void __iomem *mbase, u8 epnum)
 /*
  * TUSB6010 doesn't allow 8-bit access; 16-bit access is the minimum.
  */
-static u8 tusb_readb(const void __iomem *addr, unsigned offset)
+static u8 tusb_readb(void __iomem *addr, unsigned offset)
 {
 	u16 tmp;
 	u8 val;