diff mbox series

ath10k: update the max num of peers supported for WCN3990

Message ID 1550570468-25869-1-git-send-email-aambure@codeaurora.org (mailing list archive)
State Accepted
Commit 15493239eacf4487f5744bf88a2f95b09d2a2453
Delegated to: Kalle Valo
Headers show
Series ath10k: update the max num of peers supported for WCN3990 | expand

Commit Message

Abhishek Ambure Feb. 19, 2019, 10:01 a.m. UTC
WCN3990 firmware versions WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 & onwards
supports maximum 33 peers including self peer. To support maximum peers,
send updated peer param to firmware during initialization.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/core.c | 6 +++---
 drivers/net/wireless/ath/ath10k/hw.h   | 6 +++---
 2 files changed, 6 insertions(+), 6 deletions(-)

Comments

Kalle Valo Feb. 26, 2019, 1:07 p.m. UTC | #1
Abhishek Ambure <aambure@codeaurora.org> wrote:

> WCN3990 firmware versions WLAN.HL.2.0-01617-QCAHLSWMTPLZ-1 & onwards
> supports maximum 33 peers including self peer. To support maximum peers,
> send updated peer param to firmware during initialization.
> 
> Tested HW: WCN3990
> Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
> 
> Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

15493239eacf ath10k: update the max num of peers supported for WCN3990
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index a1b2aea..336c6a4 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -560,10 +560,10 @@ 
 		.sw_decrypt_mcast_mgmt = true,
 		.hw_ops = &wcn3990_ops,
 		.decap_align_bytes = 1,
-		.num_peers = TARGET_HL_10_TLV_NUM_PEERS,
+		.num_peers = TARGET_HL_TLV_NUM_PEERS,
 		.n_cipher_suites = 11,
-		.ast_skid_limit = TARGET_HL_10_TLV_AST_SKID_LIMIT,
-		.num_wds_entries = TARGET_HL_10_TLV_NUM_WDS_ENTRIES,
+		.ast_skid_limit = TARGET_HL_TLV_AST_SKID_LIMIT,
+		.num_wds_entries = TARGET_HL_TLV_NUM_WDS_ENTRIES,
 		.target_64bit = true,
 		.rx_ring_fill_level = HTT_RX_RING_FILL_LEVEL_DUAL_MAC,
 		.per_ce_irq = true,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index fe6b2ed..67413ae 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -763,9 +763,9 @@  struct ath10k_hw_ops {
 #define TARGET_TLV_MGMT_NUM_MSDU_DESC		(50)
 
 /* Target specific defines for WMI-HL-1.0 firmware */
-#define TARGET_HL_10_TLV_NUM_PEERS		14
-#define TARGET_HL_10_TLV_AST_SKID_LIMIT		6
-#define TARGET_HL_10_TLV_NUM_WDS_ENTRIES	2
+#define TARGET_HL_TLV_NUM_PEERS			33
+#define TARGET_HL_TLV_AST_SKID_LIMIT		16
+#define TARGET_HL_TLV_NUM_WDS_ENTRIES		2
 
 /* Diagnostic Window */
 #define CE_DIAG_PIPE	7