diff mbox series

[RFC,v4,01/21] PCI: Fix writing invalid BARs during pci_restore_state()

Message ID 20190311133122.11417-2-s.miroshnichenko@yadro.com (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show
Series PCI: Allow BAR movement during hotplug | expand

Commit Message

Sergei Miroshnichenko March 11, 2019, 1:31 p.m. UTC
If BAR movement has happened (due to PCIe hotplug) after pci_save_state(),
the saved addresses will become outdated. Restore them the most recently
calculated values, not the ones stored in an arbitrary moment.

Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
---
 drivers/pci/pci.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Bjorn Helgaas March 26, 2019, 2:02 p.m. UTC | #1
Hi Sergey,

Thanks for all your work here.  This is a long-standing problem, and
I'm glad you're working on it.

On Mon, Mar 11, 2019 at 04:31:02PM +0300, Sergey Miroshnichenko wrote:
> If BAR movement has happened (due to PCIe hotplug) after pci_save_state(),
> the saved addresses will become outdated. Restore them the most recently
> calculated values, not the ones stored in an arbitrary moment.

Maybe pci_save_state() should not even save BAR values, since we have
no mechanism to determine whether those saved values are valid?

> Signed-off-by: Sergey Miroshnichenko <s.miroshnichenko@yadro.com>
> ---
>  drivers/pci/pci.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 7c1b362f599a..f006068be209 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -1376,7 +1376,7 @@ static void pci_restore_config_space(struct pci_dev *pdev)
>  	if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
>  		pci_restore_config_space_range(pdev, 10, 15, 0, false);
>  		/* Restore BARs before the command register. */
> -		pci_restore_config_space_range(pdev, 4, 9, 10, false);
> +		pci_restore_bars(pdev);

pci_restore_bars() is a much longer call path than
pci_restore_config_space_range(), so it's a little bit scary just from
the complexity point of view, but I think this does make sense.

But I am concerned that we don't handle bridge BARs the same way (this
is an existing problem, not something you're introducing).

Bridge BARs (if implemented) are dwords 4 and 5, so they are currently
restored as part of this range:

  pci_restore_config_space_range(pdev, 0, 8, 0, false);

If we followed the same pattern as for type 0 devices, this would look
like:

  pci_restore_config_space_range(pdev, 6, 8, 0, false);
  pci_restore_config_space_range(pdev, 4, 5, 10, false);  /* BARs */
  pci_restore_config_space_range(pdev, 0, 3, 0, false);

And after your patch, it would look like:

  pci_restore_config_space_range(pdev, 6, 8, 0, false);
  pci_restore_bars(pdev);
  pci_restore_config_space_range(pdev, 0, 3, 0, false);

I think this would require a little enhancement in pci_restore_bars()
to filter the BAR range based on the hdr_type.

I would propose

  - adding a new patch to split up the bridge restore so the (0, 8)
    range is split into (6, 8); (4, 5); (0, 3), so it matches the type
    0 restore.

  - adding another new patch to filter the BAR range in
    pci_restore_bars().

  - updating this patch to use pci_restore_bars() in both the type 0
    and type 1 paths.

  - possibly adding a patch to make pci_save_state() not save BAR
    values in dev->saved_config_space, and any other changes needed to
    stop reading BARs from that area.

What do you think?

>  		pci_restore_config_space_range(pdev, 0, 3, 0, false);
>  	} else if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
>  		pci_restore_config_space_range(pdev, 12, 15, 0, false);
> -- 
> 2.20.1
>
diff mbox series

Patch

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 7c1b362f599a..f006068be209 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -1376,7 +1376,7 @@  static void pci_restore_config_space(struct pci_dev *pdev)
 	if (pdev->hdr_type == PCI_HEADER_TYPE_NORMAL) {
 		pci_restore_config_space_range(pdev, 10, 15, 0, false);
 		/* Restore BARs before the command register. */
-		pci_restore_config_space_range(pdev, 4, 9, 10, false);
+		pci_restore_bars(pdev);
 		pci_restore_config_space_range(pdev, 0, 3, 0, false);
 	} else if (pdev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
 		pci_restore_config_space_range(pdev, 12, 15, 0, false);