diff mbox series

[6/7] brcmfmac: use separate Kconfig file for brcmfmac

Message ID 1558008251-13692-7-git-send-email-arend.vanspriel@broadcom.com (mailing list archive)
State Accepted
Commit 9ff8614a3dbede823c34f084929ed4a40b779394
Delegated to: Kalle Valo
Headers show
Series brcm80211: SPDX tags and Kconfig cleanup | expand

Commit Message

Arend van Spriel May 16, 2019, 12:04 p.m. UTC 
The number of Kconfig items related to brcmfmac is considerable and
upcoming changes will add some more so it seems good idea to have
a separate Kconfig file for brcmfmac.

Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 drivers/net/wireless/broadcom/brcm80211/Kconfig    | 50 +---------------------
 .../wireless/broadcom/brcm80211/brcmfmac/Kconfig   | 50 ++++++++++++++++++++++
 2 files changed, 51 insertions(+), 49 deletions(-)
 create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/Kconfig b/drivers/net/wireless/broadcom/brcm80211/Kconfig
index 6acba67..580f666 100644
--- a/drivers/net/wireless/broadcom/brcm80211/Kconfig
+++ b/drivers/net/wireless/broadcom/brcm80211/Kconfig
@@ -17,55 +17,7 @@  config BRCMSMAC
 	  be available if you select BCMA_DRIVER_GPIO. If you choose to build a
 	  module, the driver will be called brcmsmac.ko.
 
-config BRCMFMAC
-	tristate "Broadcom FullMAC WLAN driver"
-	depends on CFG80211
-	select BRCMUTIL
-	---help---
-	  This module adds support for wireless adapters based on Broadcom
-	  FullMAC chipsets. It has to work with at least one of the bus
-	  interface support. If you choose to build a module, it'll be called
-	  brcmfmac.ko.
-
-config BRCMFMAC_PROTO_BCDC
-	bool
-
-config BRCMFMAC_PROTO_MSGBUF
-	bool
-
-config BRCMFMAC_SDIO
-	bool "SDIO bus interface support for FullMAC driver"
-	depends on (MMC = y || MMC = BRCMFMAC)
-	depends on BRCMFMAC
-	select BRCMFMAC_PROTO_BCDC
-	select FW_LOADER
-	default y
-	---help---
-	  This option enables the SDIO bus interface support for Broadcom
-	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
-	  use the driver for a SDIO wireless card.
-
-config BRCMFMAC_USB
-	bool "USB bus interface support for FullMAC driver"
-	depends on (USB = y || USB = BRCMFMAC)
-	depends on BRCMFMAC
-	select BRCMFMAC_PROTO_BCDC
-	select FW_LOADER
-	---help---
-	  This option enables the USB bus interface support for Broadcom
-	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
-	  use the driver for an USB wireless card.
-
-config BRCMFMAC_PCIE
-	bool "PCIE bus interface support for FullMAC driver"
-	depends on BRCMFMAC
-	depends on PCI
-	select BRCMFMAC_PROTO_MSGBUF
-	select FW_LOADER
-	---help---
-	  This option enables the PCIE bus interface support for Broadcom
-	  IEEE802.11ac embedded FullMAC WLAN driver. Say Y if you want to
-	  use the driver for an PCIE wireless card.
+source "drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig"
 
 config BRCM_TRACING
 	bool "Broadcom device tracing"
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig
new file mode 100644
index 0000000..32794c1
--- /dev/null
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Kconfig
@@ -0,0 +1,50 @@ 
+config BRCMFMAC
+	tristate "Broadcom FullMAC WLAN driver"
+	depends on CFG80211
+	select BRCMUTIL
+	help
+	  This module adds support for wireless adapters based on Broadcom
+	  FullMAC chipsets. It has to work with at least one of the bus
+	  interface support. If you choose to build a module, it'll be called
+	  brcmfmac.ko.
+
+config BRCMFMAC_PROTO_BCDC
+	bool
+
+config BRCMFMAC_PROTO_MSGBUF
+	bool
+
+config BRCMFMAC_SDIO
+	bool "SDIO bus interface support for FullMAC driver"
+	depends on (MMC = y || MMC = BRCMFMAC)
+	depends on BRCMFMAC
+	select BRCMFMAC_PROTO_BCDC
+	select FW_LOADER
+	default y
+	help
+	  This option enables the SDIO bus interface support for Broadcom
+	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
+	  use the driver for a SDIO wireless card.
+
+config BRCMFMAC_USB
+	bool "USB bus interface support for FullMAC driver"
+	depends on (USB = y || USB = BRCMFMAC)
+	depends on BRCMFMAC
+	select BRCMFMAC_PROTO_BCDC
+	select FW_LOADER
+	help
+	  This option enables the USB bus interface support for Broadcom
+	  IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
+	  use the driver for an USB wireless card.
+
+config BRCMFMAC_PCIE
+	bool "PCIE bus interface support for FullMAC driver"
+	depends on BRCMFMAC
+	depends on PCI
+	select BRCMFMAC_PROTO_MSGBUF
+	select FW_LOADER
+	help
+	  This option enables the PCIE bus interface support for Broadcom
+	  IEEE802.11ac embedded FullMAC WLAN driver. Say Y if you want to
+	  use the driver for an PCIE wireless card.
+