Message ID | 20190611121910.27643-1-sven@narfation.org (mailing list archive) |
---|---|
State | Superseded, archived |
Delegated to: | Kalle Valo |
Headers | show |
Series | ath10k: fix max antenna gain unit | expand |
On 6/11/19 5:19 AM, Sven Eckelmann wrote: > From: Sven Eckelmann <seckelmann@datto.com> > > Most of the txpower for the ath10k firmware is stored as twicepower (0.5 dB > steps). This isn't the case for max_antenna_gain - which is still expected > by the firmware as dB. > > The firmware is converting it from dB to the internal (twicepower) > representation when it calculates the limits of a channel. This can be seen > in tpc_stats when configuring "12" as max_antenna_gain. Instead of the > expected 12 (6 dB), the tpc_stats shows 24 (12 dB). > > Tested on QCA9888 and IPQ4019 with firmware 10.4-3.5.3-00057. I did a visual inspection of wave-1 firmware source and it appears this change would be correct for it as well. I would also suggest updating the comments in the wmi.h structure to document the units. Thanks, Ben > > Fixes: 02256930d9b8 ("ath10k: use proper tx power unit") > Signed-off-by: Sven Eckelmann <seckelmann@datto.com> > --- > Cc: Michal Kazior <michal@plume.com> > > drivers/net/wireless/ath/ath10k/mac.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c > index 9c703d287333..35d026a2772a 100644 > --- a/drivers/net/wireless/ath/ath10k/mac.c > +++ b/drivers/net/wireless/ath/ath10k/mac.c > @@ -1008,7 +1008,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) > arg.channel.min_power = 0; > arg.channel.max_power = channel->max_power * 2; > arg.channel.max_reg_power = channel->max_reg_power * 2; > - arg.channel.max_antenna_gain = channel->max_antenna_gain * 2; > + arg.channel.max_antenna_gain = channel->max_antenna_gain; > > reinit_completion(&ar->vdev_setup_done); > > @@ -1450,7 +1450,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, > arg.channel.min_power = 0; > arg.channel.max_power = chandef->chan->max_power * 2; > arg.channel.max_reg_power = chandef->chan->max_reg_power * 2; > - arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2; > + arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain; > > if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { > arg.ssid = arvif->u.ap.ssid; > @@ -3105,7 +3105,7 @@ static int ath10k_update_channel_list(struct ath10k *ar) > ch->min_power = 0; > ch->max_power = channel->max_power * 2; > ch->max_reg_power = channel->max_reg_power * 2; > - ch->max_antenna_gain = channel->max_antenna_gain * 2; > + ch->max_antenna_gain = channel->max_antenna_gain; > ch->reg_class_id = 0; /* FIXME */ > > /* FIXME: why use only legacy modes, why not any >
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 9c703d287333..35d026a2772a 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1008,7 +1008,7 @@ static int ath10k_monitor_vdev_start(struct ath10k *ar, int vdev_id) arg.channel.min_power = 0; arg.channel.max_power = channel->max_power * 2; arg.channel.max_reg_power = channel->max_reg_power * 2; - arg.channel.max_antenna_gain = channel->max_antenna_gain * 2; + arg.channel.max_antenna_gain = channel->max_antenna_gain; reinit_completion(&ar->vdev_setup_done); @@ -1450,7 +1450,7 @@ static int ath10k_vdev_start_restart(struct ath10k_vif *arvif, arg.channel.min_power = 0; arg.channel.max_power = chandef->chan->max_power * 2; arg.channel.max_reg_power = chandef->chan->max_reg_power * 2; - arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain * 2; + arg.channel.max_antenna_gain = chandef->chan->max_antenna_gain; if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { arg.ssid = arvif->u.ap.ssid; @@ -3105,7 +3105,7 @@ static int ath10k_update_channel_list(struct ath10k *ar) ch->min_power = 0; ch->max_power = channel->max_power * 2; ch->max_reg_power = channel->max_reg_power * 2; - ch->max_antenna_gain = channel->max_antenna_gain * 2; + ch->max_antenna_gain = channel->max_antenna_gain; ch->reg_class_id = 0; /* FIXME */ /* FIXME: why use only legacy modes, why not any