diff mbox series

[v2,01/11] rtw88: add fast xmit support

Message ID 1560497055-17197-2-git-send-email-yhchuang@realtek.com (mailing list archive)
State Accepted
Commit e6fec313fa3fe5696dbb40ec25aece22bd21a092
Delegated to: Kalle Valo
Headers show
Series rtw88: regular driver upgrade with minor changes | expand

Commit Message

Tony Chuang June 14, 2019, 7:24 a.m. UTC 
From: Yan-Hsuan Chuang <yhchuang@realtek.com>

With dynamic power save support, rtw88 is able to support fast tx
path, claim it to mac80211.

Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
---
 drivers/net/wireless/realtek/rtw88/main.c | 1 +
 1 file changed, 1 insertion(+)

Comments

Kalle Valo June 25, 2019, 5:09 a.m. UTC | #1 
<yhchuang@realtek.com> wrote:

> From: Yan-Hsuan Chuang <yhchuang@realtek.com>
> 
> With dynamic power save support, rtw88 is able to support fast tx
> path, claim it to mac80211.
> 
> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>

11 patches applied to wireless-drivers-next.git, thanks.

e6fec313fa3f rtw88: add fast xmit support
44cc4c63a877 rtw88: add support for random mac scan
6fabdc4a34d0 rtw88: add beacon function setting
818d46e7715e rtw88: 8822c: add rf write protection when switching channel
f859e71f9615 rtw88: 8822c: update channel and bandwidth BB setting
e027446667b5 rtw88: 8822c: disable rx clock gating before counter reset
e1cc056c92f9 rtw88: 8822c: use more accurate ofdm fa counting
d41673b941f2 rtw88: power on again if it was already on
a11cddd42b67 rtw88: restore DACK results to save time
e9c87a3b744b rtw88: rsvd page should go though management queue
4a36de3996c7 rtw88: fix typo rtw_writ16_set
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtw88/main.c b/drivers/net/wireless/realtek/rtw88/main.c
index 142e530..d2e8d2e 100644
--- a/drivers/net/wireless/realtek/rtw88/main.c
+++ b/drivers/net/wireless/realtek/rtw88/main.c
@@ -1168,6 +1168,7 @@  int rtw_register_hw(struct rtw_dev *rtwdev, struct ieee80211_hw *hw)
 	ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
 	ieee80211_hw_set(hw, SUPPORTS_PS);
 	ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
+	ieee80211_hw_set(hw, SUPPORT_FAST_XMIT);
 
 	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
 				     BIT(NL80211_IFTYPE_AP) |