| Message ID | 20190725063108.15790-1-bjorn.andersson@linaro.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 7165ef890a4c44cf16db66b82fd78448f4bde6ba |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | ath10k: Fix HOST capability QMI incompatibility | expand |
On Wed, Jul 24, 2019 at 11:31:08PM -0700, Bjorn Andersson wrote: > The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI > message") served the purpose of supporting the new and extended HOST > capability QMI message. > > But while the new message adds a slew of optional members it changes the > data type of the "daemon_support" member, which means that older > versions of the firmware will fail to decode the incoming request > message. > > There is no way to detect this breakage from Linux and there's no way to > recover from sending the wrong message (i.e. we can't just try one > format and then fallback to the other), so a quirk is introduced in > DeviceTree to indicate to the driver that the firmware requires the 8bit > version of this message. > > Cc: stable@vger.kernel.org > Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > --- > .../bindings/net/wireless/qcom,ath10k.txt | 6 +++++ Acked-by: Rob Herring <robh@kernel.org> > drivers/net/wireless/ath/ath10k/qmi.c | 13 ++++++++--- > .../net/wireless/ath/ath10k/qmi_wlfw_v01.c | 22 +++++++++++++++++++ > .../net/wireless/ath/ath10k/qmi_wlfw_v01.h | 1 + > drivers/net/wireless/ath/ath10k/snoc.c | 11 ++++++++++ > drivers/net/wireless/ath/ath10k/snoc.h | 1 + > 6 files changed, 51 insertions(+), 3 deletions(-)
Bjorn Andersson <bjorn.andersson@linaro.org> wrote: > The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI > message") served the purpose of supporting the new and extended HOST > capability QMI message. > > But while the new message adds a slew of optional members it changes the > data type of the "daemon_support" member, which means that older > versions of the firmware will fail to decode the incoming request > message. > > There is no way to detect this breakage from Linux and there's no way to > recover from sending the wrong message (i.e. we can't just try one > format and then fallback to the other), so a quirk is introduced in > DeviceTree to indicate to the driver that the firmware requires the 8bit > version of this message. > > Cc: stable@vger.kernel.org > Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> > Acked-by: Rob Herring <robh@kernel.org> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Patch applied to ath-next branch of ath.git, thanks. 7165ef890a4c ath10k: Fix HOST capability QMI incompatibility
diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt index ae661e65354e..f9499b20d840 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt @@ -81,6 +81,12 @@ Optional properties: Definition: Name of external front end module used. Some valid FEM names for example: "microsemi-lx5586", "sky85703-11" and "sky85803" etc. +- qcom,snoc-host-cap-8bit-quirk: + Usage: Optional + Value type: <empty> + Definition: Quirk specifying that the firmware expects the 8bit version + of the host capability QMI request + Example (to supply PCI based wifi block details): diff --git a/drivers/net/wireless/ath/ath10k/qmi.c b/drivers/net/wireless/ath/ath10k/qmi.c index 3b63b6257c43..545ac1f06997 100644 --- a/drivers/net/wireless/ath/ath10k/qmi.c +++ b/drivers/net/wireless/ath/ath10k/qmi.c @@ -581,22 +581,29 @@ static int ath10k_qmi_host_cap_send_sync(struct ath10k_qmi *qmi) { struct wlfw_host_cap_resp_msg_v01 resp = {}; struct wlfw_host_cap_req_msg_v01 req = {}; + struct qmi_elem_info *req_ei; struct ath10k *ar = qmi->ar; + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); struct qmi_txn txn; int ret; req.daemon_support_valid = 1; req.daemon_support = 0; - ret = qmi_txn_init(&qmi->qmi_hdl, &txn, - wlfw_host_cap_resp_msg_v01_ei, &resp); + ret = qmi_txn_init(&qmi->qmi_hdl, &txn, wlfw_host_cap_resp_msg_v01_ei, + &resp); if (ret < 0) goto out; + if (test_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags)) + req_ei = wlfw_host_cap_8bit_req_msg_v01_ei; + else + req_ei = wlfw_host_cap_req_msg_v01_ei; + ret = qmi_send_request(&qmi->qmi_hdl, NULL, &txn, QMI_WLFW_HOST_CAP_REQ_V01, WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN, - wlfw_host_cap_req_msg_v01_ei, &req); + req_ei, &req); if (ret < 0) { qmi_txn_cancel(&txn); ath10k_err(ar, "failed to send host capability request: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c index 1fe05c6218c3..86fcf4e1de5f 100644 --- a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c +++ b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.c @@ -1988,6 +1988,28 @@ struct qmi_elem_info wlfw_host_cap_req_msg_v01_ei[] = { {} }; +struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[] = { + { + .data_type = QMI_OPT_FLAG, + .elem_len = 1, + .elem_size = sizeof(u8), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct wlfw_host_cap_req_msg_v01, + daemon_support_valid), + }, + { + .data_type = QMI_UNSIGNED_1_BYTE, + .elem_len = 1, + .elem_size = sizeof(u8), + .array_type = NO_ARRAY, + .tlv_type = 0x10, + .offset = offsetof(struct wlfw_host_cap_req_msg_v01, + daemon_support), + }, + {} +}; + struct qmi_elem_info wlfw_host_cap_resp_msg_v01_ei[] = { { .data_type = QMI_STRUCT, diff --git a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h index bca1186e1560..4d107e1364a8 100644 --- a/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h +++ b/drivers/net/wireless/ath/ath10k/qmi_wlfw_v01.h @@ -575,6 +575,7 @@ struct wlfw_host_cap_req_msg_v01 { #define WLFW_HOST_CAP_REQ_MSG_V01_MAX_MSG_LEN 189 extern struct qmi_elem_info wlfw_host_cap_req_msg_v01_ei[]; +extern struct qmi_elem_info wlfw_host_cap_8bit_req_msg_v01_ei[]; struct wlfw_host_cap_resp_msg_v01 { struct qmi_response_type_v01 resp; diff --git a/drivers/net/wireless/ath/ath10k/snoc.c b/drivers/net/wireless/ath/ath10k/snoc.c index b491361e6ed4..fc15a0037f0e 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.c +++ b/drivers/net/wireless/ath/ath10k/snoc.c @@ -1261,6 +1261,15 @@ static int ath10k_snoc_resource_init(struct ath10k *ar) return ret; } +static void ath10k_snoc_quirks_init(struct ath10k *ar) +{ + struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); + struct device *dev = &ar_snoc->dev->dev; + + if (of_property_read_bool(dev->of_node, "qcom,snoc-host-cap-8bit-quirk")) + set_bit(ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, &ar_snoc->flags); +} + int ath10k_snoc_fw_indication(struct ath10k *ar, u64 type) { struct ath10k_snoc *ar_snoc = ath10k_snoc_priv(ar); @@ -1678,6 +1687,8 @@ static int ath10k_snoc_probe(struct platform_device *pdev) ar->ce_priv = &ar_snoc->ce; msa_size = drv_data->msa_size; + ath10k_snoc_quirks_init(ar); + ret = ath10k_snoc_resource_init(ar); if (ret) { ath10k_warn(ar, "failed to initialize resource: %d\n", ret); diff --git a/drivers/net/wireless/ath/ath10k/snoc.h b/drivers/net/wireless/ath/ath10k/snoc.h index d62f53501fbb..9db823e46314 100644 --- a/drivers/net/wireless/ath/ath10k/snoc.h +++ b/drivers/net/wireless/ath/ath10k/snoc.h @@ -63,6 +63,7 @@ enum ath10k_snoc_flags { ATH10K_SNOC_FLAG_REGISTERED, ATH10K_SNOC_FLAG_UNREGISTERING, ATH10K_SNOC_FLAG_RECOVERY, + ATH10K_SNOC_FLAG_8BIT_HOST_CAP_QUIRK, }; struct ath10k_snoc {
The introduction of 768ec4c012ac ("ath10k: update HOST capability QMI message") served the purpose of supporting the new and extended HOST capability QMI message. But while the new message adds a slew of optional members it changes the data type of the "daemon_support" member, which means that older versions of the firmware will fail to decode the incoming request message. There is no way to detect this breakage from Linux and there's no way to recover from sending the wrong message (i.e. we can't just try one format and then fallback to the other), so a quirk is introduced in DeviceTree to indicate to the driver that the firmware requires the 8bit version of this message. Cc: stable@vger.kernel.org Fixes: 768ec4c012ac ("ath10k: update HOST capability qmi message") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> --- .../bindings/net/wireless/qcom,ath10k.txt | 6 +++++ drivers/net/wireless/ath/ath10k/qmi.c | 13 ++++++++--- .../net/wireless/ath/ath10k/qmi_wlfw_v01.c | 22 +++++++++++++++++++ .../net/wireless/ath/ath10k/qmi_wlfw_v01.h | 1 + drivers/net/wireless/ath/ath10k/snoc.c | 11 ++++++++++ drivers/net/wireless/ath/ath10k/snoc.h | 1 + 6 files changed, 51 insertions(+), 3 deletions(-)