@@ -156,6 +156,7 @@
/git-show-branch
/git-show-index
/git-show-ref
+/git-sparse-checkout
/git-stage
/git-stash
/git-status
@@ -436,7 +436,7 @@ support.
SEE ALSO
--------
linkgit:git-write-tree[1]; linkgit:git-ls-files[1];
-linkgit:gitignore[5]
+linkgit:gitignore[5]; linkgit:git-sparse-checkout[1];
GIT
---
new file mode 100644
@@ -0,0 +1,85 @@
+git-sparse-checkout(1)
+=======================
+
+NAME
+----
+git-sparse-checkout - Initialize and modify the sparse-checkout
+configuration, which reduces the checkout to a set of directories
+given by a list of prefixes.
+
+
+SYNOPSIS
+--------
+[verse]
+'git sparse-checkout <subcommand> [options]'
+
+
+DESCRIPTION
+-----------
+
+Initialize and modify the sparse-checkout configuration, which reduces
+the checkout to a set of directories given by a list of prefixes.
+
+
+COMMANDS
+--------
+'list'::
+ Provide a list of the contents in the sparse-checkout file.
+
+
+SPARSE CHECKOUT
+----------------
+
+"Sparse checkout" allows populating the working directory sparsely.
+It uses the skip-worktree bit (see linkgit:git-update-index[1]) to tell
+Git whether a file in the working directory is worth looking at. If
+the skip-worktree bit is set, then the file is ignored in the working
+directory. Git will not populate the contents of those files, which
+makes a sparse checkout helpful when working in a repository with many
+files, but only a few are important to the current user.
+
+The `$GIT_DIR/info/sparse-checkout` file is used to define the
+skip-worktree reference bitmap. When Git updates the working
+directory, it updates the skip-worktree bits in the index based
+ont this file. The files matching the patterns in the file will
+appear in the working directory, and the rest will not.
+
+## FULL PATTERN SET
+
+By default, the sparse-checkout file uses the same syntax as `.gitignore`
+files.
+
+While `$GIT_DIR/info/sparse-checkout` is usually used to specify what
+files are included, you can also specify what files are _not_ included,
+using negative patterns. For example, to remove the file `unwanted`:
+
+----------------
+/*
+!unwanted
+----------------
+
+Another tricky thing is fully repopulating the working directory when you
+no longer want sparse checkout. You cannot just disable "sparse
+checkout" because skip-worktree bits are still in the index and your working
+directory is still sparsely populated. You should re-populate the working
+directory with the `$GIT_DIR/info/sparse-checkout` file content as
+follows:
+
+----------------
+/*
+----------------
+
+Then you can disable sparse checkout. Sparse checkout support in 'git
+checkout' and similar commands is disabled by default. You need to
+set `core.sparseCheckout` to `true` in order to have sparse checkout
+support.
+
+SEE ALSO
+--------
+
+linkgit:git-read-tree[1]
+linkgit:gitignore[5]
+
+GIT
+---
+Part of the linkgit:git[1] suite
@@ -1121,6 +1121,7 @@ BUILTIN_OBJS += builtin/shortlog.o
BUILTIN_OBJS += builtin/show-branch.o
BUILTIN_OBJS += builtin/show-index.o
BUILTIN_OBJS += builtin/show-ref.o
+BUILTIN_OBJS += builtin/sparse-checkout.o
BUILTIN_OBJS += builtin/stash.o
BUILTIN_OBJS += builtin/stripspace.o
BUILTIN_OBJS += builtin/submodule--helper.o
@@ -223,6 +223,7 @@ int cmd_shortlog(int argc, const char **argv, const char *prefix);
int cmd_show(int argc, const char **argv, const char *prefix);
int cmd_show_branch(int argc, const char **argv, const char *prefix);
int cmd_show_index(int argc, const char **argv, const char *prefix);
+int cmd_sparse_checkout(int argc, const char **argv, const char *prefix);
int cmd_status(int argc, const char **argv, const char *prefix);
int cmd_stash(int argc, const char **argv, const char *prefix);
int cmd_stripspace(int argc, const char **argv, const char *prefix);
new file mode 100644
@@ -0,0 +1,86 @@
+#include "builtin.h"
+#include "config.h"
+#include "dir.h"
+#include "parse-options.h"
+#include "pathspec.h"
+#include "repository.h"
+#include "run-command.h"
+#include "strbuf.h"
+
+static char const * const builtin_sparse_checkout_usage[] = {
+ N_("git sparse-checkout [list]"),
+ NULL
+};
+
+static char *get_sparse_checkout_filename(void)
+{
+ return git_pathdup("info/sparse-checkout");
+}
+
+static void write_patterns_to_file(FILE *fp, struct pattern_list *pl)
+{
+ int i;
+
+ for (i = 0; i < pl->nr; i++) {
+ struct path_pattern *p = pl->patterns[i];
+
+ if (p->flags & PATTERN_FLAG_NEGATIVE)
+ fprintf(fp, "!");
+
+ fprintf(fp, "%s", p->pattern);
+
+ if (p->flags & PATTERN_FLAG_MUSTBEDIR)
+ fprintf(fp, "/");
+
+ fprintf(fp, "\n");
+ }
+}
+
+static int sparse_checkout_list(int argc, const char **argv)
+{
+ struct pattern_list pl;
+ char *sparse_filename;
+ int res;
+
+ memset(&pl, 0, sizeof(pl));
+
+ sparse_filename = get_sparse_checkout_filename();
+ res = add_patterns_from_file_to_list(sparse_filename, "", 0, &pl, NULL);
+ free(sparse_filename);
+
+ if (res < 0) {
+ warning(_("this worktree is not sparse (sparse-checkout file may not exist)"));
+ return 0;
+ }
+
+ write_patterns_to_file(stdout, &pl);
+ clear_pattern_list(&pl);
+
+ return 0;
+}
+
+int cmd_sparse_checkout(int argc, const char **argv, const char *prefix)
+{
+ static struct option builtin_sparse_checkout_options[] = {
+ OPT_END(),
+ };
+
+ if (argc == 2 && !strcmp(argv[1], "-h"))
+ usage_with_options(builtin_sparse_checkout_usage,
+ builtin_sparse_checkout_options);
+
+ argc = parse_options(argc, argv, prefix,
+ builtin_sparse_checkout_options,
+ builtin_sparse_checkout_usage,
+ PARSE_OPT_STOP_AT_NON_OPTION);
+
+ git_config(git_default_config, NULL);
+
+ if (argc > 0) {
+ if (!strcmp(argv[0], "list"))
+ return sparse_checkout_list(argc, argv);
+ }
+
+ usage_with_options(builtin_sparse_checkout_usage,
+ builtin_sparse_checkout_options);
+}
@@ -576,6 +576,7 @@ static struct cmd_struct commands[] = {
{ "show-branch", cmd_show_branch, RUN_SETUP },
{ "show-index", cmd_show_index },
{ "show-ref", cmd_show_ref, RUN_SETUP },
+ { "sparse-checkout", cmd_sparse_checkout, RUN_SETUP | NEED_WORK_TREE },
{ "stage", cmd_add, RUN_SETUP | NEED_WORK_TREE },
/*
* NEEDSWORK: Until the builtin stash is thoroughly robust and no
new file mode 100755
@@ -0,0 +1,50 @@
+#!/bin/sh
+
+test_description='sparse checkout builtin tests'
+
+. ./test-lib.sh
+
+test_expect_success 'setup' '
+ git init repo &&
+ (
+ cd repo &&
+ echo "initial" >a &&
+ mkdir folder1 folder2 deep &&
+ mkdir deep/deeper1 deep/deeper2 &&
+ mkdir deep/deeper1/deepest &&
+ cp a folder1 &&
+ cp a folder2 &&
+ cp a deep &&
+ cp a deep/deeper1 &&
+ cp a deep/deeper2 &&
+ cp a deep/deeper1/deepest &&
+ git add . &&
+ git commit -m "initial commit"
+ )
+'
+
+test_expect_success 'git sparse-checkout list (empty)' '
+ git -C repo sparse-checkout list >list 2>err &&
+ test_line_count = 0 list &&
+ test_i18ngrep "this worktree is not sparse (sparse-checkout file may not exist)" err
+'
+
+test_expect_success 'git sparse-checkout list (populated)' '
+ test_when_finished rm -f repo/.git/info/sparse-checkout &&
+ cat >repo/.git/info/sparse-checkout <<-EOF &&
+ /folder1/*
+ /deep/
+ **/a
+ !*bin*
+ EOF
+ git -C repo sparse-checkout list >list &&
+ cat >expect <<-EOF &&
+ /folder1/*
+ /deep/
+ **/a
+ !*bin*
+ EOF
+ test_cmp expect list
+'
+
+test_done