diff mbox series

[4/6] clk: realtek: add reset controller support for Realtek SoCs

Message ID 20191203073540.9321-5-james.tai@realtek.com (mailing list archive)
State New, archived
Headers show
Series arm64: Realtek RTD1619 clock and reset controllers | expand

Commit Message

James Tai [戴志峰] Dec. 3, 2019, 7:35 a.m. UTC
From: cylee12 <cylee12@realtek.com>

This patch add reset control support for Realtek SoCs.

Signed-off-by: Cheng-Yu Lee <cylee12@realtek.com>
Signed-off-by: James Tai <james.tai@realtek.com>
---
 drivers/clk/realtek/Kconfig  |   1 +
 drivers/clk/realtek/Makefile |   1 +
 drivers/clk/realtek/reset.c  | 107 +++++++++++++++++++++++++++++++++++
 drivers/clk/realtek/reset.h  |  37 ++++++++++++
 4 files changed, 146 insertions(+)
 create mode 100644 drivers/clk/realtek/reset.c
 create mode 100644 drivers/clk/realtek/reset.h
diff mbox series

Patch

diff --git a/drivers/clk/realtek/Kconfig b/drivers/clk/realtek/Kconfig
index 5bca757dddfa..8e7e7edf64dd 100644
--- a/drivers/clk/realtek/Kconfig
+++ b/drivers/clk/realtek/Kconfig
@@ -1,6 +1,7 @@ 
 # SPDX-License-Identifier: GPL-2.0-only
 config COMMON_CLK_REALTEK
 	bool "Clock driver for realtek"
+	select RESET_CONTROLLER
 	select MFD_SYSCON
 
 config CLK_PLL_PSAUD
diff --git a/drivers/clk/realtek/Makefile b/drivers/clk/realtek/Makefile
index 050d450db067..43f8bd71c0c8 100644
--- a/drivers/clk/realtek/Makefile
+++ b/drivers/clk/realtek/Makefile
@@ -7,3 +7,4 @@  clk-rtk-y += clk-regmap-gate.o
 clk-rtk-y += clk-pll.o
 clk-rtk-$(CONFIG_CLK_PLL_PSAUD) += clk-pll-psaud.o
 clk-rtk-$(CONFIG_CLK_PLL_DIF) += clk-pll-dif.o
+clk-rtk-y += reset.o
diff --git a/drivers/clk/realtek/reset.c b/drivers/clk/realtek/reset.c
new file mode 100644
index 000000000000..3f4d1a723b2a
--- /dev/null
+++ b/drivers/clk/realtek/reset.c
@@ -0,0 +1,107 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2019 Realtek Semiconductor Corporation
+ */
+
+#include <linux/of.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include "reset.h"
+
+static int rtk_reset_assert(struct reset_controller_dev *rcdev,
+			    unsigned long idx)
+{
+	struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
+	struct rtk_reset_bank *bank = &data->banks[idx >> 8];
+	uint32_t id   = idx & 0xff;
+	uint32_t mask = bank->write_en ? (0x3 << id) : BIT(id);
+	uint32_t val  = bank->write_en ? (0x2 << id) : 0;
+
+	return regmap_update_bits(data->regmap, bank->ofs, mask, val);
+}
+
+static int rtk_reset_deassert(struct reset_controller_dev *rcdev,
+			      unsigned long idx)
+{
+	struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
+	struct rtk_reset_bank *bank = &data->banks[idx >> 8];
+	uint32_t id   = idx & 0xff;
+	uint32_t mask = bank->write_en ? (0x3 << id) : BIT(id);
+	uint32_t val  = mask;
+
+	return regmap_update_bits(data->regmap, bank->ofs, mask, val);
+}
+
+static int rtk_reset_reset(struct reset_controller_dev *rcdev,
+			   unsigned long idx)
+{
+	int ret;
+
+	ret = rtk_reset_assert(rcdev, idx);
+	if (ret)
+		return ret;
+
+	return rtk_reset_deassert(rcdev, idx);
+}
+
+static int rtk_reset_status(struct reset_controller_dev *rcdev,
+			    unsigned long idx)
+{
+	struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
+	struct rtk_reset_bank *bank = &data->banks[idx >> 8];
+	uint32_t id = idx & 0xff;
+	uint32_t val;
+
+	regmap_read(data->regmap, bank->ofs, &val);
+	return !((val >> id) & 1);
+}
+
+static struct reset_control_ops rtk_reset_ops = {
+	.assert   = rtk_reset_assert,
+	.deassert = rtk_reset_deassert,
+	.reset    = rtk_reset_reset,
+	.status   = rtk_reset_status,
+};
+
+static int rtk_of_reset_xlate(struct reset_controller_dev *rcdev,
+			      const struct of_phandle_args *reset_spec)
+{
+	struct rtk_reset_data *data = to_rtk_reset_controller(rcdev);
+	int val;
+
+	val = reset_spec->args[0];
+	if (val >= rcdev->nr_resets)
+		return -EINVAL;
+
+	if (data->id_xlate)
+		return data->id_xlate(val);
+	return val;
+}
+
+
+int rtk_reset_controller_add(struct device *dev, struct regmap *regmap,
+			     struct rtk_reset_initdata *initdata)
+{
+	struct rtk_reset_data *data;
+	struct device_node *np = dev->of_node;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	data->regmap    = regmap;
+	data->num_banks = initdata->num_banks;
+	data->banks     = initdata->banks;
+	data->id_xlate  = initdata->id_xlate;
+
+	data->rcdev.owner     = THIS_MODULE;
+	data->rcdev.ops       = &rtk_reset_ops;
+	data->rcdev.of_node   = np;
+	data->rcdev.nr_resets = initdata->num_banks * 0x100;
+	data->rcdev.of_xlate  = rtk_of_reset_xlate;
+	data->rcdev.of_reset_n_cells = 1;
+
+	return reset_controller_register(&data->rcdev);
+}
+
diff --git a/drivers/clk/realtek/reset.h b/drivers/clk/realtek/reset.h
new file mode 100644
index 000000000000..f0cc7b1045ee
--- /dev/null
+++ b/drivers/clk/realtek/reset.h
@@ -0,0 +1,37 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2019 Realtek Semiconductor Corporation
+ * Author: Cheng-Yu Lee <cylee12@realtek.com>
+ */
+
+#ifndef __CLK_REALTEK_RESET_H
+#define __CLK_REALTEK_RESET_H
+
+#include <linux/reset-controller.h>
+
+struct rtk_reset_bank {
+	uint32_t ofs;
+	uint32_t write_en;
+};
+
+struct rtk_reset_data {
+	struct reset_controller_dev rcdev;
+	struct rtk_reset_bank *banks;
+	uint32_t num_banks;
+	struct regmap *regmap;
+	unsigned long (*id_xlate)(unsigned long id);
+};
+
+#define to_rtk_reset_controller(r) \
+	container_of(r, struct rtk_reset_data, rcdev)
+
+struct rtk_reset_initdata {
+	struct rtk_reset_bank *banks;
+	uint32_t num_banks;
+	unsigned long (*id_xlate)(unsigned long id);
+};
+
+int rtk_reset_controller_add(struct device *dev, struct regmap *regmap,
+			     struct rtk_reset_initdata *initdata);
+
+#endif /* __CLK_REALTEK_RESET_H */