diff mbox series

[4/6] dt-bindings: rockchip: Add DesignWare based PCIe controller

Message ID 1578986580-71974-5-git-send-email-shawn.lin@rock-chips.com (mailing list archive)
State Superseded, archived
Delegated to: Lorenzo Pieralisi
Headers show
Series Add Rockchip new PCIe controller and combo phy support | expand

Commit Message

Shawn Lin Jan. 14, 2020, 7:22 a.m. UTC
From: Simon Xue <xxm@rock-chips.com>

Signed-off-by: Simon Xue <xxm@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
---

 .../devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 132 +++++++++++++++++++++
 1 file changed, 132 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

Comments

Rob Herring Jan. 15, 2020, 12:05 a.m. UTC | #1
On Tue, Jan 14, 2020 at 03:22:58PM +0800, Shawn Lin wrote:
> From: Simon Xue <xxm@rock-chips.com>
> 
> Signed-off-by: Simon Xue <xxm@rock-chips.com>
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> ---
> 
>  .../devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 132 +++++++++++++++++++++
>  1 file changed, 132 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml: 
properties:rockchip,usbpciegrf: {'items': [{'description': 'The grf for 
COMBPHY configuration and state registers.'}]} is not valid under any of 
the given schemas (Possible causes of the failure):
	
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml: 
properties:rockchip,usbpciegrf: 'description' is a required property

> 
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> new file mode 100644
> index 0000000..c5205f6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> @@ -0,0 +1,132 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: DesignWare based PCIe RC controller on Rockchip SoCs
> +
> +maintainers:
> +        - Shawn Lin <shawn.lin@rock-chips.com>
> +        - Simon Xue <xxm@rock-chips.com>

indent 2 spaces.

> +

You need to reference pci-bus.yaml.

> +properties:
> +  compatible:
> +    enum:
> +      - rockchip,rk1808-pcie
> +      - snps,dw-pcie

This means the compatible is one of these 2 strings.

It's also going to be a problem because it will match on all DTs with 
'snps,dw-pcie'. Look at some of the 'arm,primecell' schema for how to 
avoid that with 'select'.

> +
> +  reg:
> +    maxItems: 2
> +
> +  clocks:
> +    items:
> +      - description: High speed clock for PCIe
> +      - description: Low speed clock for PCIe
> +      - description: AHB clock for PCIe
> +      - description: APB clock for PCIe
> +      - description: Auxiliary clock for PCIe
> +
> +  clock-names:
> +    items:
> +      - const: hsclk
> +      - const: lsclk
> +      - const: aclk
> +      - const: pclk
> +      - const: sclk-aux
> +
> +  resets:
> +    items:
> +      - description: PCIe niu high reset line
> +      - description: PCIe niu low reset line
> +      - description: PCIe grf reset line
> +      - description: PCIe control reset line
> +      - description: PCIe control powerup reset line
> +      - description: PCIe control master reset line
> +      - description: PCIe control slave reset line
> +      - description: PCIe control dbi reset line
> +      - description: PCIe control button reset line
> +      - description: PCIe control power engine reset line
> +      - description: PCIe control core reset line
> +      - description: PCIe control non-sticky reset line
> +      - description: PCIe control sticky reset line
> +      - description: PCIe control power reset line
> +      - description: PCIe niu ahb reset line
> +      - description: PCIe niu apb reset line
> +
> +  reset-names:
> +    items:
> +      - const: niu-h
> +      - const: niu-l
> +      - const: grf-p
> +      - const: ctl-p
> +      - const: ctl-powerup
> +      - const: ctl-mst-a
> +      - const: ctl-slv-a
> +      - const: ctl-dbi-a
> +      - const: ctl-button
> +      - const: ctl-pe
> +      - const: ctl-core
> +      - const: ctl-nsticky
> +      - const: ctl-sticky
> +      - const: ctl-pwr
> +      - const: ctl-niu-a
> +      - const: ctl-niu-p
> +
> +  rockchip,usbpciegrf:
> +    items:
> +      - description: The grf for COMBPHY configuration and state registers.
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - msi-map
> +  - num-lanes
> +  - phys
> +  - phy-names
> +  - resets
> +  - reset-names
> +  - rockchip,usbpciegrf
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    usb_pcie_grf: syscon@fe040000 {
> +        compatible = "rockchip,usb-pcie-grf", "syscon";
> +        reg = <0x0 0xfe040000 0x0 0x1000>;
> +    };
> +
> +    pcie0: pcie@fc400000 {
> +        compatible = "rockchip,rk1808-pcie", "snps,dw-pcie";
> +        reg = <0x0 0xfc000000 0x0 0x400000>,
> +              <0x0 0xfc400000 0x0 0x10000>;
> +        clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>,
> +                 <&cru ACLK_PCIE>, <&cru PCLK_PCIE>,
> +                 <&cru SCLK_PCIE_AUX>;
> +        clock-names = "hsclk", "lsclk",
> +                      "aclk", "pclk",
> +                      "sclk-aux";
> +        msi-map = <0x0 &its 0x0 0x1000>;
> +        num-lanes = <2>;
> +        phys = <&combphy PHY_TYPE_PCIE>;
> +        phy-names = "pcie-phy";
> +        resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>,
> +                 <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>,
> +                 <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>,
> +                 <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>,
> +                 <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>,
> +                 <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>,
> +                 <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>,
> +                 <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>;
> +        reset-names = "niu-h", "niu-l", "grf-p", "ctl-p",
> +                      "ctl-powerup", "ctl-mst-a", "ctl-slv-a",
> +                      "ctl-dbi-a", "ctl-button", "ctl-pe",
> +                      "ctl-core", "ctl-nsticky", "ctl-sticky",
> +                      "ctl-pwr", "ctl-niu-a", "ctl-niu-p";
> +        rockchip,usbpciegrf = <&usb_pcie_grf>;

You are missing a number of common, required PCI properties.

> +    };
> +
> +...
> -- 
> 1.9.1
> 
> 
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 0000000..c5205f6
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,132 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe RC controller on Rockchip SoCs
+
+maintainers:
+        - Shawn Lin <shawn.lin@rock-chips.com>
+        - Simon Xue <xxm@rock-chips.com>
+
+properties:
+  compatible:
+    enum:
+      - rockchip,rk1808-pcie
+      - snps,dw-pcie
+
+  reg:
+    maxItems: 2
+
+  clocks:
+    items:
+      - description: High speed clock for PCIe
+      - description: Low speed clock for PCIe
+      - description: AHB clock for PCIe
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+
+  clock-names:
+    items:
+      - const: hsclk
+      - const: lsclk
+      - const: aclk
+      - const: pclk
+      - const: sclk-aux
+
+  resets:
+    items:
+      - description: PCIe niu high reset line
+      - description: PCIe niu low reset line
+      - description: PCIe grf reset line
+      - description: PCIe control reset line
+      - description: PCIe control powerup reset line
+      - description: PCIe control master reset line
+      - description: PCIe control slave reset line
+      - description: PCIe control dbi reset line
+      - description: PCIe control button reset line
+      - description: PCIe control power engine reset line
+      - description: PCIe control core reset line
+      - description: PCIe control non-sticky reset line
+      - description: PCIe control sticky reset line
+      - description: PCIe control power reset line
+      - description: PCIe niu ahb reset line
+      - description: PCIe niu apb reset line
+
+  reset-names:
+    items:
+      - const: niu-h
+      - const: niu-l
+      - const: grf-p
+      - const: ctl-p
+      - const: ctl-powerup
+      - const: ctl-mst-a
+      - const: ctl-slv-a
+      - const: ctl-dbi-a
+      - const: ctl-button
+      - const: ctl-pe
+      - const: ctl-core
+      - const: ctl-nsticky
+      - const: ctl-sticky
+      - const: ctl-pwr
+      - const: ctl-niu-a
+      - const: ctl-niu-p
+
+  rockchip,usbpciegrf:
+    items:
+      - description: The grf for COMBPHY configuration and state registers.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - resets
+  - reset-names
+  - rockchip,usbpciegrf
+
+additionalProperties: false
+
+examples:
+  - |
+    usb_pcie_grf: syscon@fe040000 {
+        compatible = "rockchip,usb-pcie-grf", "syscon";
+        reg = <0x0 0xfe040000 0x0 0x1000>;
+    };
+
+    pcie0: pcie@fc400000 {
+        compatible = "rockchip,rk1808-pcie", "snps,dw-pcie";
+        reg = <0x0 0xfc000000 0x0 0x400000>,
+              <0x0 0xfc400000 0x0 0x10000>;
+        clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>,
+                 <&cru ACLK_PCIE>, <&cru PCLK_PCIE>,
+                 <&cru SCLK_PCIE_AUX>;
+        clock-names = "hsclk", "lsclk",
+                      "aclk", "pclk",
+                      "sclk-aux";
+        msi-map = <0x0 &its 0x0 0x1000>;
+        num-lanes = <2>;
+        phys = <&combphy PHY_TYPE_PCIE>;
+        phy-names = "pcie-phy";
+        resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>,
+                 <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>,
+                 <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>,
+                 <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>,
+                 <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>,
+                 <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>,
+                 <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>,
+                 <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>;
+        reset-names = "niu-h", "niu-l", "grf-p", "ctl-p",
+                      "ctl-powerup", "ctl-mst-a", "ctl-slv-a",
+                      "ctl-dbi-a", "ctl-button", "ctl-pe",
+                      "ctl-core", "ctl-nsticky", "ctl-sticky",
+                      "ctl-pwr", "ctl-niu-a", "ctl-niu-p";
+        rockchip,usbpciegrf = <&usb_pcie_grf>;
+    };
+
+...