| Message ID | 20200212080415.31265-2-wgong@codeaurora.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | d81686d3335648197c5da3992b151648706dc0f8 |
| Delegated to: | Kalle Valo |
| Headers | show |
| Series | ath10k: improve throughout of TX of sdio | expand |
Wen Gong <wgong@codeaurora.org> wrote: > For sdio chip, it is high latency bus, all the TX packet's content will > be tranferred from HOST memory to firmware memory via sdio bus, then it > need much more memory in firmware than low latency bus chip, for low > latency chip, such as PCI-E, it only need to transfer the TX descriptor > via PCI-E bus to firmware memory. For sdio chip, reduce the complexity of > TX logic will help TX efficiency since its memory is limited, and it will > reduce the TX circle's time of each packet and then firmware will have more > memory for TX since TX complete also need memeory. > > This patch disable TX complete indication from firmware for htt data > packet, it will not have TX complete indication from firmware to ath10k. > It will cut the cost of bus bandwidth of TX complete and make the TX > logic of firmware simpler, it results in significant performance > improvement on TX path. > > Udp TX throughout is 130Mbps without this patch, and it arrives > 400Mbps with this patch. > > The downside of this patch is the command "iw wlan0 station dump" will > show 0 for "tx retries" and "tx failed" since all tx packet's status > is success. > > This patch only effect sdio chip, it will not effect PCI, SNOC etc. > > Tested with QCA6174 SDIO with firmware > WLAN.RMH.4.4.1-00017-QCARMSWPZ-1 > > Signed-off-by: Wen Gong <wgong@codeaurora.org> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org> This has new warnings: drivers/net/wireless/ath/ath10k/htt_tx.c: In function 'ath10k_htt_htc_tx_complete': drivers/net/wireless/ath/ath10k/htt_tx.c:566:30: warning: 'msg_type' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/ath/ath10k/htt_tx.c:573:6: warning: 'flags1' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/net/wireless/ath/ath10k/htt_tx.c:577:42: warning: 'desc_hdr' may be used uninitialized in this function [-Wmaybe-uninitialized] >From what I can see these are false positives, but please do double check that. In the pending branch I solved it like this: --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -546,9 +546,9 @@ void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb) struct ath10k_htt *htt = &ar->htt; struct htt_tx_done tx_done = {0}; struct htt_cmd_hdr *htt_hdr; - struct htt_data_tx_desc *desc_hdr; - u16 flags1; - u8 msg_type; + struct htt_data_tx_desc *desc_hdr = NULL; + u16 flags1 = 0; + u8 msg_type = 0; if (htt->disable_tx_comp) { htt_hdr = (struct htt_cmd_hdr *)skb->data;
On 2020-04-07 13:44, Kalle Valo wrote: > This has new warnings: > > drivers/net/wireless/ath/ath10k/htt_tx.c: In function > 'ath10k_htt_htc_tx_complete': > drivers/net/wireless/ath/ath10k/htt_tx.c:566:30: warning: 'msg_type' > may be used uninitialized in this function [-Wmaybe-uninitialized] > drivers/net/wireless/ath/ath10k/htt_tx.c:573:6: warning: 'flags1' may > be used uninitialized in this function [-Wmaybe-uninitialized] > drivers/net/wireless/ath/ath10k/htt_tx.c:577:42: warning: 'desc_hdr' > may be used uninitialized in this function [-Wmaybe-uninitialized] > I already run ath10k-check, but not see these warnings. my gcc: gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4 so is it because my gcc too version too low? >> From what I can see these are false positives, but please do double >> check that. In > the pending branch I solved it like this: > > --- a/drivers/net/wireless/ath/ath10k/htt_tx.c > +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c > @@ -546,9 +546,9 @@ void ath10k_htt_htc_tx_complete(struct ath10k *ar, > struct sk_buff *skb) > struct ath10k_htt *htt = &ar->htt; > struct htt_tx_done tx_done = {0}; > struct htt_cmd_hdr *htt_hdr; > - struct htt_data_tx_desc *desc_hdr; > - u16 flags1; > - u8 msg_type; > + struct htt_data_tx_desc *desc_hdr = NULL; > + u16 flags1 = 0; > + u8 msg_type = 0; > > if (htt->disable_tx_comp) { > htt_hdr = (struct htt_cmd_hdr *)skb->data;
Wen Gong <wgong@codeaurora.org> writes: > On 2020-04-07 13:44, Kalle Valo wrote: > >> This has new warnings: >> >> drivers/net/wireless/ath/ath10k/htt_tx.c: In function >> 'ath10k_htt_htc_tx_complete': >> drivers/net/wireless/ath/ath10k/htt_tx.c:566:30: warning: 'msg_type' >> may be used uninitialized in this function [-Wmaybe-uninitialized] >> drivers/net/wireless/ath/ath10k/htt_tx.c:573:6: warning: 'flags1' may >> be used uninitialized in this function [-Wmaybe-uninitialized] >> drivers/net/wireless/ath/ath10k/htt_tx.c:577:42: warning: 'desc_hdr' >> may be used uninitialized in this function [-Wmaybe-uninitialized] >> > > I already run ath10k-check, but not see these warnings. > my gcc: gcc (Ubuntu 4.8.4-2ubuntu1~14.04.4) 4.8.4 > so is it because my gcc too version too low? Most likely, I'm using 9.2 from crosstool: x86_64-linux-gcc (GCC) 9.2.0 crosstool is a handy way to install GCC for kernel compilations, here are my notes: listings: https://www.kernel.org/pub/tools/crosstool/ wget https://www.kernel.org/pub/tools/crosstool/files/bin/x86_64/8.1.0/x86_64-gcc-8.1.0-nolibc-x86_64-linux.tar.xz pushd /opt/cross/ tar -xf ~/tmp/crosstool/x86_64-gcc-8.1.0-nolibc-x86_64-linux.tar.xz In top level create GNUMakefile: CROSS_COMPILE=/opt/cross/gcc-8.1.0-nolibc/x86_64-linux/bin/x86_64-linux- include Makefile
Wen Gong <wgong@codeaurora.org> wrote: > For sdio chip, it is high latency bus, all the TX packet's content will > be tranferred from HOST memory to firmware memory via sdio bus, then it > need much more memory in firmware than low latency bus chip, for low > latency chip, such as PCI-E, it only need to transfer the TX descriptor > via PCI-E bus to firmware memory. For sdio chip, reduce the complexity of > TX logic will help TX efficiency since its memory is limited, and it will > reduce the TX circle's time of each packet and then firmware will have more > memory for TX since TX complete also need memeory. > > This patch disable TX complete indication from firmware for htt data > packet, it will not have TX complete indication from firmware to ath10k. > It will cut the cost of bus bandwidth of TX complete and make the TX > logic of firmware simpler, it results in significant performance > improvement on TX path. > > Udp TX throughout is 130Mbps without this patch, and it arrives > 400Mbps with this patch. > > The downside of this patch is the command "iw wlan0 station dump" will > show 0 for "tx retries" and "tx failed" since all tx packet's status > is success. > > This patch only effect sdio chip, it will not effect PCI, SNOC etc. > > Tested with QCA6174 SDIO with firmware > WLAN.RMH.4.4.1-00017-QCARMSWPZ-1 > > Signed-off-by: Wen Gong <wgong@codeaurora.org> > Signed-off-by: Kalle Valo <kvalo@codeaurora.org> 2 patches applied to ath-next branch of ath.git, thanks. d81686d33356 ath10k: disable TX complete indication of htt for sdio c61a74837043 ath10k: change ATH10K_SDIO_BUS_REQUEST_MAX_NUM from 64 to 1024
diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 5ec16ce19b69..b21c5f2fa04b 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -696,10 +696,7 @@ static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode) if (ret) return ret; - /* Data transfer is not initiated, when reduced Tx completion - * is used for SDIO. disable it until fixed - */ - param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET; + param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET; /* Alternate credit size of 1544 as used by SDIO firmware is * not big enough for mac80211 / native wifi frames. disable it diff --git a/drivers/net/wireless/ath/ath10k/hif.h b/drivers/net/wireless/ath/ath10k/hif.h index 496ee34a4d78..0dd8973d0acf 100644 --- a/drivers/net/wireless/ath/ath10k/hif.h +++ b/drivers/net/wireless/ath/ath10k/hif.h @@ -56,6 +56,8 @@ struct ath10k_hif_ops { int (*swap_mailbox)(struct ath10k *ar); + int (*get_htt_tx_complete)(struct ath10k *ar); + int (*map_service_to_pipe)(struct ath10k *ar, u16 service_id, u8 *ul_pipe, u8 *dl_pipe); @@ -144,6 +146,13 @@ static inline int ath10k_hif_swap_mailbox(struct ath10k *ar) return 0; } +static inline int ath10k_hif_get_htt_tx_complete(struct ath10k *ar) +{ + if (ar->hif.ops->get_htt_tx_complete) + return ar->hif.ops->get_htt_tx_complete(ar); + return 0; +} + static inline int ath10k_hif_map_service_to_pipe(struct ath10k *ar, u16 service_id, u8 *ul_pipe, u8 *dl_pipe) diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index 2248d6c022f4..61ee413d902a 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -660,6 +660,16 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc) return 0; } +void ath10k_htc_change_tx_credit_flow(struct ath10k_htc *htc, + enum ath10k_htc_ep_id eid, + bool enable) +{ + struct ath10k *ar = htc->ar; + struct ath10k_htc_ep *ep = &ar->htc.endpoint[eid]; + + ep->tx_credit_flow_enabled = enable; +} + int ath10k_htc_connect_service(struct ath10k_htc *htc, struct ath10k_htc_svc_conn_req *conn_req, struct ath10k_htc_svc_conn_resp *conn_resp) diff --git a/drivers/net/wireless/ath/ath10k/htc.h b/drivers/net/wireless/ath/ath10k/htc.h index 065c82d9d689..14e5c3f712c1 100644 --- a/drivers/net/wireless/ath/ath10k/htc.h +++ b/drivers/net/wireless/ath/ath10k/htc.h @@ -386,6 +386,9 @@ int ath10k_htc_start(struct ath10k_htc *htc); int ath10k_htc_connect_service(struct ath10k_htc *htc, struct ath10k_htc_svc_conn_req *conn_req, struct ath10k_htc_svc_conn_resp *conn_resp); +void ath10k_htc_change_tx_credit_flow(struct ath10k_htc *htc, + enum ath10k_htc_ep_id eid, + bool enable); int ath10k_htc_send(struct ath10k_htc *htc, enum ath10k_htc_ep_id eid, struct sk_buff *packet); struct sk_buff *ath10k_htc_alloc_skb(struct ath10k *ar, int size); diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c index c32ab07d2586..b07f14b53e72 100644 --- a/drivers/net/wireless/ath/ath10k/htt.c +++ b/drivers/net/wireless/ath/ath10k/htt.c @@ -10,6 +10,7 @@ #include "htt.h" #include "core.h" #include "debug.h" +#include "hif.h" static const enum htt_t2h_msg_type htt_main_t2h_msg_types[] = { [HTT_MAIN_T2H_MSG_TYPE_VERSION_CONF] = HTT_T2H_MSG_TYPE_VERSION_CONF, @@ -155,6 +156,10 @@ int ath10k_htt_connect(struct ath10k_htt *htt) htt->eid = conn_resp.eid; + htt->disable_tx_comp = ath10k_hif_get_htt_tx_complete(htt->ar); + if (htt->disable_tx_comp) + ath10k_htc_change_tx_credit_flow(&htt->ar->htc, htt->eid, true); + return 0; } diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h index d09ba4a550cc..2b3f32c929d1 100644 --- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h @@ -150,9 +150,19 @@ enum htt_data_tx_desc_flags1 { HTT_DATA_TX_DESC_FLAGS1_MORE_IN_BATCH = 1 << 12, HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD = 1 << 13, HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD = 1 << 14, - HTT_DATA_TX_DESC_FLAGS1_RSVD1 = 1 << 15 + HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE = 1 << 15 }; +#define HTT_TX_CREDIT_DELTA_ABS_M 0xffff0000 +#define HTT_TX_CREDIT_DELTA_ABS_S 16 +#define HTT_TX_CREDIT_DELTA_ABS_GET(word) \ + (((word) & HTT_TX_CREDIT_DELTA_ABS_M) >> HTT_TX_CREDIT_DELTA_ABS_S) + +#define HTT_TX_CREDIT_SIGN_BIT_M 0x00000100 +#define HTT_TX_CREDIT_SIGN_BIT_S 8 +#define HTT_TX_CREDIT_SIGN_BIT_GET(word) \ + (((word) & HTT_TX_CREDIT_SIGN_BIT_M) >> HTT_TX_CREDIT_SIGN_BIT_S) + enum htt_data_tx_ext_tid { HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST = 16, HTT_DATA_TX_EXT_TID_MGMT = 17, @@ -2051,6 +2061,7 @@ struct ath10k_htt { bool tx_mem_allocated; const struct ath10k_htt_tx_ops *tx_ops; const struct ath10k_htt_rx_ops *rx_ops; + bool disable_tx_comp; }; struct ath10k_htt_tx_ops { diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 22e78413fd44..2427adda4d9a 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -3929,6 +3929,9 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) } case HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION: { struct htt_tx_done tx_done = {}; + struct ath10k_htt *htt = &ar->htt; + struct ath10k_htc *htc = &ar->htc; + struct ath10k_htc_ep *ep = &ar->htc.endpoint[htt->eid]; int status = __le32_to_cpu(resp->mgmt_tx_completion.status); int info = __le32_to_cpu(resp->mgmt_tx_completion.info); @@ -3954,6 +3957,12 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) break; } + if (htt->disable_tx_comp) { + spin_lock_bh(&htc->tx_lock); + ep->tx_credits++; + spin_unlock_bh(&htc->tx_lock); + } + status = ath10k_txrx_tx_unref(htt, &tx_done); if (!status) { spin_lock_bh(&htt->tx_lock); @@ -4028,8 +4037,31 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) skb_queue_tail(&htt->rx_in_ord_compl_q, skb); return false; } - case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND: + case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND: { + struct ath10k_htt *htt = &ar->htt; + struct ath10k_htc *htc = &ar->htc; + struct ath10k_htc_ep *ep = &ar->htc.endpoint[htt->eid]; + u32 msg_word = __le32_to_cpu(*(__le32 *)resp); + int htt_credit_delta; + + htt_credit_delta = HTT_TX_CREDIT_DELTA_ABS_GET(msg_word); + if (HTT_TX_CREDIT_SIGN_BIT_GET(msg_word)) + htt_credit_delta = -htt_credit_delta; + + ath10k_dbg(ar, ATH10K_DBG_HTT, + "credit update: delta:%d\n", + htt_credit_delta); + + if (htt->disable_tx_comp) { + spin_lock_bh(&htc->tx_lock); + ep->tx_credits += htt_credit_delta; + spin_unlock_bh(&htc->tx_lock); + ath10k_dbg(ar, ATH10K_DBG_HTT, + "credit total:%d\n", + ep->tx_credits); + } break; + } case HTT_T2H_MSG_TYPE_CHAN_CHANGE: { u32 phymode = __le32_to_cpu(resp->chan_change.phymode); u32 freq = __le32_to_cpu(resp->chan_change.freq); diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index a182c0944cc7..8f2fda382b6b 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -543,7 +543,39 @@ void ath10k_htt_tx_free(struct ath10k_htt *htt) void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb) { + struct ath10k_htt *htt = &ar->htt; + struct htt_tx_done tx_done = {0}; + struct htt_cmd_hdr *htt_hdr; + struct htt_data_tx_desc *desc_hdr; + u16 flags1; + u8 msg_type; + + if (htt->disable_tx_comp) { + htt_hdr = (struct htt_cmd_hdr *)skb->data; + msg_type = htt_hdr->msg_type; + + if (msg_type == HTT_H2T_MSG_TYPE_TX_FRM) { + desc_hdr = (struct htt_data_tx_desc *) + (skb->data + sizeof(*htt_hdr)); + flags1 = __le16_to_cpu(desc_hdr->flags1); + } + } + dev_kfree_skb_any(skb); + + if ((!htt->disable_tx_comp) || (msg_type != HTT_H2T_MSG_TYPE_TX_FRM)) + return; + + ath10k_dbg(ar, ATH10K_DBG_HTT, + "htt tx complete msdu id:%u ,flags1:%x\n", + __le16_to_cpu(desc_hdr->id), flags1); + + if (flags1 & HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE) + return; + + tx_done.status = HTT_TX_COMPL_STATE_ACK; + tx_done.msdu_id = __le16_to_cpu(desc_hdr->id); + ath10k_txrx_tx_unref(&ar->htt, &tx_done); } void ath10k_htt_hif_tx_complete(struct ath10k *ar, struct sk_buff *skb) @@ -1269,6 +1301,9 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm flags0 |= SM(ATH10K_HW_TXRX_MGMT, HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT; + + if (htt->disable_tx_comp) + flags1 |= HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE; break; } diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 21b7a2a873b0..54176a0c0479 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -765,7 +765,7 @@ ath10k_is_rssi_enable(struct ath10k_hw_params *hw, #define TARGET_TLV_NUM_TDLS_VDEVS 1 #define TARGET_TLV_NUM_TIDS ((TARGET_TLV_NUM_PEERS) * 2) #define TARGET_TLV_NUM_MSDU_DESC (1024 + 32) -#define TARGET_TLV_NUM_MSDU_DESC_HL 64 +#define TARGET_TLV_NUM_MSDU_DESC_HL 1024 #define TARGET_TLV_NUM_WOW_PATTERNS 22 #define TARGET_TLV_MGMT_NUM_MSDU_DESC (50) diff --git a/drivers/net/wireless/ath/ath10k/sdio.c b/drivers/net/wireless/ath/ath10k/sdio.c index 6fdf71b8b676..7b894dcaad2e 100644 --- a/drivers/net/wireless/ath/ath10k/sdio.c +++ b/drivers/net/wireless/ath/ath10k/sdio.c @@ -1727,6 +1727,28 @@ static int ath10k_sdio_hif_swap_mailbox(struct ath10k *ar) return 0; } +static int ath10k_sdio_get_htt_tx_complete(struct ath10k *ar) +{ + u32 addr, val; + int ret; + + addr = host_interest_item_address(HI_ITEM(hi_acs_flags)); + + ret = ath10k_sdio_hif_diag_read32(ar, addr, &val); + if (ret) { + ath10k_warn(ar, + "unable to read hi_acs_flags for htt tx comple : %d\n", ret); + return ret; + } + + ret = (val & HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK); + + ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio reduce tx complete fw%sack\n", + ret ? " " : " not "); + + return ret; +} + /* HIF start/stop */ static int ath10k_sdio_hif_start(struct ath10k *ar) @@ -2001,6 +2023,7 @@ static const struct ath10k_hif_ops ath10k_sdio_hif_ops = { .start = ath10k_sdio_hif_start, .stop = ath10k_sdio_hif_stop, .swap_mailbox = ath10k_sdio_hif_swap_mailbox, + .get_htt_tx_complete = ath10k_sdio_get_htt_tx_complete, .map_service_to_pipe = ath10k_sdio_hif_map_service_to_pipe, .get_default_pipe = ath10k_sdio_hif_get_default_pipe, .send_complete_check = ath10k_sdio_hif_send_complete_check,
For sdio chip, it is high latency bus, all the TX packet's content will be tranferred from HOST memory to firmware memory via sdio bus, then it need much more memory in firmware than low latency bus chip, for low latency chip, such as PCI-E, it only need to transfer the TX descriptor via PCI-E bus to firmware memory. For sdio chip, reduce the complexity of TX logic will help TX efficiency since its memory is limited, and it will reduce the TX circle's time of each packet and then firmware will have more memory for TX since TX complete also need memeory. This patch disable TX complete indication from firmware for htt data packet, it will not have TX complete indication from firmware to ath10k. It will cut the cost of bus bandwidth of TX complete and make the TX logic of firmware simpler, it results in significant performance improvement on TX path. Udp TX throughout is 130Mbps without this patch, and it arrives 400Mbps with this patch. The downside of this patch is the command "iw wlan0 station dump" will show 0 for "tx retries" and "tx failed" since all tx packet's status is success. This patch only effect sdio chip, it will not effect PCI, SNOC etc. Tested with QCA6174 SDIO with firmware WLAN.RMH.4.4.1-00017-QCARMSWPZ-1 Signed-off-by: Wen Gong <wgong@codeaurora.org> --- drivers/net/wireless/ath/ath10k/core.c | 5 +--- drivers/net/wireless/ath/ath10k/hif.h | 9 ++++++ drivers/net/wireless/ath/ath10k/htc.c | 10 +++++++ drivers/net/wireless/ath/ath10k/htc.h | 3 ++ drivers/net/wireless/ath/ath10k/htt.c | 5 ++++ drivers/net/wireless/ath/ath10k/htt.h | 13 ++++++++- drivers/net/wireless/ath/ath10k/htt_rx.c | 34 ++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/htt_tx.c | 35 ++++++++++++++++++++++++ drivers/net/wireless/ath/ath10k/hw.h | 2 +- drivers/net/wireless/ath/ath10k/sdio.c | 23 ++++++++++++++++ 10 files changed, 132 insertions(+), 7 deletions(-)