diff mbox series

[07/11] PCI: hv: Prepare hv_compose_msi_msg() for the VMBus-channel-interrupt-to-vCPU reassignment functionality

Message ID 20200406001514.19876-8-parri.andrea@gmail.com (mailing list archive)
State Not Applicable, archived
Delegated to: Lorenzo Pieralisi
Headers show
Series None | expand

Commit Message

Andrea Parri April 6, 2020, 12:15 a.m. UTC
The current implementation of hv_compose_msi_msg() is incompatible with
the new functionality that allows changing the vCPU a VMBus channel will
interrupt: if this function always calls hv_pci_onchannelcallback() in
the polling loop, the interrupt going to a different CPU could cause
hv_pci_onchannelcallback() to be running simultaneously in a tasklet,
which will break.  The current code also has a problem in that it is not
synchronized with vmbus_reset_channel_cb(): hv_compose_msi_msg() could
be accessing the ring buffer via the call of hv_pci_onchannelcallback()
well after the time that vmbus_reset_channel_cb() has finished.

Fix these issues as follows.  Disable the channel tasklet before
entering the polling loop in hv_compose_msi_msg() and re-enable it when
done.  This will prevent hv_pci_onchannelcallback() from running in a
tasklet on a different CPU.  Moreover, poll by always calling
hv_pci_onchannelcallback(), but check the channel callback function for
NULL and invoke the callback within a sched_lock critical section.  This
will prevent hv_compose_msi_msg() from accessing the ring buffer after
vmbus_reset_channel_cb() has acquired the sched_lock spinlock.

Suggested-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Andrew Murray <amurray@thegoodpenguin.co.uk>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: <linux-pci@vger.kernel.org>
---
 drivers/pci/controller/pci-hyperv.c | 44 ++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 16 deletions(-)

Comments

Michael Kelley (LINUX) April 10, 2020, 7:30 p.m. UTC | #1
From: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Sent: Sunday, April 5, 2020 5:15 PM
> 
> The current implementation of hv_compose_msi_msg() is incompatible with
> the new functionality that allows changing the vCPU a VMBus channel will
> interrupt: if this function always calls hv_pci_onchannelcallback() in
> the polling loop, the interrupt going to a different CPU could cause
> hv_pci_onchannelcallback() to be running simultaneously in a tasklet,
> which will break.  The current code also has a problem in that it is not
> synchronized with vmbus_reset_channel_cb(): hv_compose_msi_msg() could
> be accessing the ring buffer via the call of hv_pci_onchannelcallback()
> well after the time that vmbus_reset_channel_cb() has finished.
> 
> Fix these issues as follows.  Disable the channel tasklet before
> entering the polling loop in hv_compose_msi_msg() and re-enable it when
> done.  This will prevent hv_pci_onchannelcallback() from running in a
> tasklet on a different CPU.  Moreover, poll by always calling
> hv_pci_onchannelcallback(), but check the channel callback function for
> NULL and invoke the callback within a sched_lock critical section.  This
> will prevent hv_compose_msi_msg() from accessing the ring buffer after
> vmbus_reset_channel_cb() has acquired the sched_lock spinlock.
> 
> Suggested-by: Michael Kelley <mikelley@microsoft.com>
> Signed-off-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
> Cc: Andrew Murray <amurray@thegoodpenguin.co.uk>
> Cc: Bjorn Helgaas <bhelgaas@google.com>
> Cc: <linux-pci@vger.kernel.org>
> ---
>  drivers/pci/controller/pci-hyperv.c | 44 ++++++++++++++++++-----------
>  1 file changed, 28 insertions(+), 16 deletions(-)
> 

Reviewed-by: Michael Kelley <mikelley@microsoft.com>
diff mbox series

Patch

diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index 9977abff92fc5..e6020480a28b1 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -1350,11 +1350,11 @@  static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 {
 	struct irq_cfg *cfg = irqd_cfg(data);
 	struct hv_pcibus_device *hbus;
+	struct vmbus_channel *channel;
 	struct hv_pci_dev *hpdev;
 	struct pci_bus *pbus;
 	struct pci_dev *pdev;
 	struct cpumask *dest;
-	unsigned long flags;
 	struct compose_comp_ctxt comp;
 	struct tran_int_desc *int_desc;
 	struct {
@@ -1372,6 +1372,7 @@  static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 	dest = irq_data_get_effective_affinity_mask(data);
 	pbus = pdev->bus;
 	hbus = container_of(pbus->sysdata, struct hv_pcibus_device, sysdata);
+	channel = hbus->hdev->channel;
 	hpdev = get_pcichild_wslot(hbus, devfn_to_wslot(pdev->devfn));
 	if (!hpdev)
 		goto return_null_message;
@@ -1428,43 +1429,52 @@  static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 		goto free_int_desc;
 	}
 
+	/*
+	 * Prevents hv_pci_onchannelcallback() from running concurrently
+	 * in the tasklet.
+	 */
+	tasklet_disable(&channel->callback_event);
+
 	/*
 	 * Since this function is called with IRQ locks held, can't
 	 * do normal wait for completion; instead poll.
 	 */
 	while (!try_wait_for_completion(&comp.comp_pkt.host_event)) {
+		unsigned long flags;
+
 		/* 0xFFFF means an invalid PCI VENDOR ID. */
 		if (hv_pcifront_get_vendor_id(hpdev) == 0xFFFF) {
 			dev_err_once(&hbus->hdev->device,
 				     "the device has gone\n");
-			goto free_int_desc;
+			goto enable_tasklet;
 		}
 
 		/*
-		 * When the higher level interrupt code calls us with
-		 * interrupt disabled, we must poll the channel by calling
-		 * the channel callback directly when channel->target_cpu is
-		 * the current CPU. When the higher level interrupt code
-		 * calls us with interrupt enabled, let's add the
-		 * local_irq_save()/restore() to avoid race:
-		 * hv_pci_onchannelcallback() can also run in tasklet.
+		 * Make sure that the ring buffer data structure doesn't get
+		 * freed while we dereference the ring buffer pointer.  Test
+		 * for the channel's onchannel_callback being NULL within a
+		 * sched_lock critical section.  See also the inline comments
+		 * in vmbus_reset_channel_cb().
 		 */
-		local_irq_save(flags);
-
-		if (hbus->hdev->channel->target_cpu == smp_processor_id())
-			hv_pci_onchannelcallback(hbus);
-
-		local_irq_restore(flags);
+		spin_lock_irqsave(&channel->sched_lock, flags);
+		if (unlikely(channel->onchannel_callback == NULL)) {
+			spin_unlock_irqrestore(&channel->sched_lock, flags);
+			goto enable_tasklet;
+		}
+		hv_pci_onchannelcallback(hbus);
+		spin_unlock_irqrestore(&channel->sched_lock, flags);
 
 		if (hpdev->state == hv_pcichild_ejecting) {
 			dev_err_once(&hbus->hdev->device,
 				     "the device is being ejected\n");
-			goto free_int_desc;
+			goto enable_tasklet;
 		}
 
 		udelay(100);
 	}
 
+	tasklet_enable(&channel->callback_event);
+
 	if (comp.comp_pkt.completion_status < 0) {
 		dev_err(&hbus->hdev->device,
 			"Request for interrupt failed: 0x%x",
@@ -1488,6 +1498,8 @@  static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 	put_pcichild(hpdev);
 	return;
 
+enable_tasklet:
+	tasklet_enable(&channel->callback_event);
 free_int_desc:
 	kfree(int_desc);
 drop_reference: