diff mbox series

[v3,1/3] dt-bindings: ath10k: Add wifi-firmware subnode for wifi node

Message ID 1586971906-20985-2-git-send-email-pillair@codeaurora.org (mailing list archive)
State Accepted
Commit 85325c24d5d2c8fcde35a634742d14d45bf7326e
Delegated to: Kalle Valo
Headers show
Series Add support to handle targets without TrustZone | expand

Commit Message

Rakesh Pillai April 15, 2020, 5:31 p.m. UTC
Add a wifi-firmware subnode for the wifi node.
This wifi-firmware subnode is needed for the
targets which do not support TrustZone.

Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 .../devicetree/bindings/net/wireless/qcom,ath10k.txt       | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

Comments

Rob Herring April 28, 2020, 3:55 p.m. UTC | #1
On Wed, 15 Apr 2020 23:01:44 +0530, Rakesh Pillai wrote:
> Add a wifi-firmware subnode for the wifi node.
> This wifi-firmware subnode is needed for the
> targets which do not support TrustZone.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> ---
>  .../devicetree/bindings/net/wireless/qcom,ath10k.txt       | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>
Kalle Valo May 5, 2020, 7:36 a.m. UTC | #2
Rakesh Pillai <pillair@codeaurora.org> wrote:

> Add a wifi-firmware subnode for the wifi node.
> This wifi-firmware subnode is needed for the
> targets which do not support TrustZone.
> 
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> Acked-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

3 patches applied to ath-next branch of ath.git, thanks.

85325c24d5d2 dt-bindings: ath10k: Add wifi-firmware subnode for wifi node
727fec790ead ath10k: Setup the msa resources before qmi init
1423f4327331 ath10k: Add support for targets without trustzone
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
index 71bf91f..65ee68e 100644
--- a/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
+++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath10k.txt
@@ -96,6 +96,17 @@  Optional properties:
 - qcom,coexist-gpio-pin : gpio pin number  information to support coex
 			  which will be used by wifi firmware.
 
+* Subnodes
+The ath10k wifi node can contain one optional firmware subnode.
+Firmware subnode is needed when the platform does not have TustZone.
+The firmware subnode must have:
+
+- iommus:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: A list of phandle and IOMMU specifier pairs.
+
+
 Example (to supply PCI based wifi block details):
 
 In this example, the node is defined as child node of the PCI controller.
@@ -196,4 +207,7 @@  wifi@18000000 {
 		memory-region = <&wifi_msa_mem>;
 		iommus = <&apps_smmu 0x0040 0x1>;
 		qcom,msa-fixed-perm;
+		wifi-firmware {
+			iommus = <&apps_iommu 0xc22 0x1>;
+		};
 };