diff mbox series

[1/3] brcmfmac: support the second p2p connection

Message ID 1588572453-194663-2-git-send-email-wright.feng@cypress.com (mailing list archive)
State Accepted
Commit babfd3caf3569e729f38a23dde75f11f5af057f5
Delegated to: Kalle Valo
Headers show
Series brcmfmac: p2p fixes and the second connection support | expand

Commit Message

Wright Feng May 4, 2020, 6:07 a.m. UTC
With RSDB feature, firmware is able to support two P2P-AGO or two
P2P-GC at the same time. So we add the second p2p connection type
to map to the second P2P connection bsscfg.

Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.c | 56 ++++++++++++++++++----
 .../net/wireless/broadcom/brcm80211/brcmfmac/p2p.h |  9 ++--
 2 files changed, 54 insertions(+), 11 deletions(-)

Comments

Kalle Valo May 6, 2020, 8:40 a.m. UTC | #1
Wright Feng <wright.feng@cypress.com> wrote:

> With RSDB feature, firmware is able to support two P2P-AGO or two
> P2P-GC at the same time. So we add the second p2p connection type
> to map to the second P2P connection bsscfg.
> 
> Signed-off-by: Wright Feng <wright.feng@cypress.com>
> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>

3 patches applied to wireless-drivers-next.git, thanks.

babfd3caf356 brcmfmac: support the second p2p connection
9c29da3f4e7e brcmfmac: Fix P2P Group Formation failure via Go-neg method
7f26cedfc9fd brcmfmac: Add P2P Action Frame retry delay to fix GAS Comeback Response failure issue
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
index 1f5deea..521b507 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.c
@@ -17,6 +17,7 @@ 
 #include "fwil_types.h"
 #include "p2p.h"
 #include "cfg80211.h"
+#include "feature.h"
 
 /* parameters used for p2p escan */
 #define P2PAPI_SCAN_NPROBES 1
@@ -474,9 +475,13 @@  static void brcmf_p2p_generate_bss_mac(struct brcmf_p2p_info *p2p, u8 *dev_addr)
 	 * BSSCFGs need to simultaneously co-exist, then this address must be
 	 * different from the P2P Device Address, but also locally administered.
 	 */
-	memcpy(p2p->int_addr, p2p->dev_addr, ETH_ALEN);
-	p2p->int_addr[0] |= 0x02;
-	p2p->int_addr[4] ^= 0x80;
+	memcpy(p2p->conn_int_addr, p2p->dev_addr, ETH_ALEN);
+	p2p->conn_int_addr[0] |= 0x02;
+	p2p->conn_int_addr[4] ^= 0x80;
+
+	memcpy(p2p->conn2_int_addr, p2p->dev_addr, ETH_ALEN);
+	p2p->conn2_int_addr[0] |= 0x02;
+	p2p->conn2_int_addr[4] ^= 0x90;
 }
 
 /**
@@ -1994,7 +1999,7 @@  int brcmf_p2p_ifchange(struct brcmf_cfg80211_info *cfg,
 
 	if_request.type = cpu_to_le16((u16)if_type);
 	if_request.chspec = cpu_to_le16(chanspec);
-	memcpy(if_request.addr, p2p->int_addr, sizeof(if_request.addr));
+	memcpy(if_request.addr, p2p->conn_int_addr, sizeof(if_request.addr));
 
 	brcmf_cfg80211_arm_vif_event(cfg, vif);
 	err = brcmf_fil_iovar_data_set(vif->ifp, "p2p_ifupd", &if_request,
@@ -2149,6 +2154,27 @@  static struct wireless_dev *brcmf_p2p_create_p2pdev(struct brcmf_p2p_info *p2p,
 	return ERR_PTR(err);
 }
 
+int brcmf_p2p_get_conn_idx(struct brcmf_cfg80211_info *cfg)
+{
+	int i;
+	struct brcmf_if *ifp = netdev_priv(cfg_to_ndev(cfg));
+
+	if (!ifp)
+		return -ENODEV;
+
+	for (i = P2PAPI_BSSCFG_CONNECTION; i < P2PAPI_BSSCFG_MAX; i++) {
+		if (!cfg->p2p.bss_idx[i].vif) {
+			if (i == P2PAPI_BSSCFG_CONNECTION2 &&
+			    !(brcmf_feat_is_enabled(ifp, BRCMF_FEAT_RSDB))) {
+				brcmf_err("Multi p2p not supported");
+				return -EIO;
+			}
+			return i;
+		}
+	}
+	return -EIO;
+}
+
 /**
  * brcmf_p2p_add_vif() - create a new P2P virtual interface.
  *
@@ -2168,7 +2194,9 @@  struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
 	struct brcmf_pub *drvr = cfg->pub;
 	struct brcmf_cfg80211_vif *vif;
 	enum brcmf_fil_p2p_if_types iftype;
-	int err;
+	int err = 0;
+	int connidx;
+	u8 *p2p_intf_addr;
 
 	if (brcmf_cfg80211_vif_event_armed(cfg))
 		return ERR_PTR(-EBUSY);
@@ -2194,9 +2222,21 @@  struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
 		return (struct wireless_dev *)vif;
 	brcmf_cfg80211_arm_vif_event(cfg, vif);
 
-	err = brcmf_p2p_request_p2p_if(&cfg->p2p, ifp, cfg->p2p.int_addr,
-				       iftype);
+	connidx = brcmf_p2p_get_conn_idx(cfg);
+
+	if (connidx == P2PAPI_BSSCFG_CONNECTION)
+		p2p_intf_addr = cfg->p2p.conn_int_addr;
+	else if (connidx == P2PAPI_BSSCFG_CONNECTION2)
+		p2p_intf_addr = cfg->p2p.conn2_int_addr;
+	else
+		err = -EINVAL;
+
+	if (!err)
+		err =  brcmf_p2p_request_p2p_if(&cfg->p2p, ifp,
+						p2p_intf_addr, iftype);
+
 	if (err) {
+		brcmf_err("request p2p interface failed\n");
 		brcmf_cfg80211_arm_vif_event(cfg, NULL);
 		goto fail;
 	}
@@ -2228,7 +2268,7 @@  struct wireless_dev *brcmf_p2p_add_vif(struct wiphy *wiphy, const char *name,
 		goto fail;
 	}
 
-	cfg->p2p.bss_idx[P2PAPI_BSSCFG_CONNECTION].vif = vif;
+	cfg->p2p.bss_idx[connidx].vif = vif;
 	/* Disable firmware roaming for P2P interface  */
 	brcmf_fil_iovar_int_set(ifp, "roam_off", 1);
 	if (iftype == BRCMF_FIL_P2P_IF_GO) {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
index 64ab9b6..d2ecee5 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/p2p.h
@@ -14,13 +14,15 @@  struct brcmf_cfg80211_info;
  *
  * @P2PAPI_BSSCFG_PRIMARY: maps to driver's primary bsscfg.
  * @P2PAPI_BSSCFG_DEVICE: maps to driver's P2P device discovery bsscfg.
- * @P2PAPI_BSSCFG_CONNECTION: maps to driver's P2P connection bsscfg.
+ * @P2PAPI_BSSCFG_CONNECTION: maps to driver's 1st P2P connection bsscfg.
+ * @P2PAPI_BSSCFG_CONNECTION2: maps to driver's 2nd P2P connection bsscfg.
  * @P2PAPI_BSSCFG_MAX: used for range checking.
  */
 enum p2p_bss_type {
 	P2PAPI_BSSCFG_PRIMARY, /* maps to driver's primary bsscfg */
 	P2PAPI_BSSCFG_DEVICE, /* maps to driver's P2P device discovery bsscfg */
-	P2PAPI_BSSCFG_CONNECTION, /* maps to driver's P2P connection bsscfg */
+	P2PAPI_BSSCFG_CONNECTION, /* driver's 1st P2P connection bsscfg */
+	P2PAPI_BSSCFG_CONNECTION2, /* driver's 2nd P2P connection bsscfg */
 	P2PAPI_BSSCFG_MAX
 };
 
@@ -119,7 +121,8 @@  struct brcmf_p2p_info {
 	struct brcmf_cfg80211_info *cfg;
 	unsigned long status;
 	u8 dev_addr[ETH_ALEN];
-	u8 int_addr[ETH_ALEN];
+	u8 conn_int_addr[ETH_ALEN];
+	u8 conn2_int_addr[ETH_ALEN];
 	struct p2p_bss bss_idx[P2PAPI_BSSCFG_MAX];
 	struct timer_list listen_timer;
 	u8 listen_channel;