diff mbox series

[next,1/6] ARM: dts: am5729: beagleboneai: switch to new cpsw switch drv

Message ID 20200907202125.22943-2-grygorii.strashko@ti.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: am57xx/dra7x: switch to new cpsw switch drv | expand

Commit Message

Grygorii Strashko Sept. 7, 2020, 8:21 p.m. UTC
Switch BeagleBone AI to use new cpsw switch driver.
It has one Ext. port only and fits dual_mac mode with no issues.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 arch/arm/boot/dts/am5729-beagleboneai.dts | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
index e9c7f44126e7..149cfafb90bf 100644
--- a/arch/arm/boot/dts/am5729-beagleboneai.dts
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -488,25 +488,29 @@ 
 	status = "okay";
 };
 
-&davinci_mdio {
+&davinci_mdio_sw {
 	reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 	reset-delay-us = <2>;
 
-	phy0: ethernet-phy@1 {
+	phy0: ethernet-phy@4 {
 		reg = <4>;
 		eee-broken-100tx;
 		eee-broken-1000t;
 	};
 };
 
-&mac {
-	slaves = <1>;
+&mac_sw {
 	status = "okay";
 };
 
-&cpsw_emac0 {
+&cpsw_port1 {
 	phy-handle = <&phy0>;
 	phy-mode = "rgmii-rxid";
+	ti,dual-emac-pvid = <1>;
+};
+
+&cpsw_port2 {
+	status = "disabled";
 };
 
 &ocp {