diff mbox series

[v2,3/4] remoteproc: mtk_vpu_rproc: Add support of JTAG

Message ID 20200910130148.8734-4-abailon@baylibre.com (mailing list archive)
State New, archived
Headers show
Series Add support of mt8183 APU | expand

Commit Message

Alexandre Bailon Sept. 10, 2020, 1:01 p.m. UTC
The DSP could be debugged using JTAG.
The support of JTAG could enabled at build time and it could be enabled
using debugfs.

Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
---
 drivers/remoteproc/Kconfig   |   9 +++
 drivers/remoteproc/mtk_apu.c | 151 ++++++++++++++++++++++++++++++++++-
 2 files changed, 159 insertions(+), 1 deletion(-)

Comments

Mathieu Poirier Sept. 29, 2020, 6:01 p.m. UTC | #1
On Thu, Sep 10, 2020 at 03:01:47PM +0200, Alexandre Bailon wrote:
> The DSP could be debugged using JTAG.
> The support of JTAG could enabled at build time and it could be enabled
> using debugfs.
> 
> Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
> ---
>  drivers/remoteproc/Kconfig   |   9 +++
>  drivers/remoteproc/mtk_apu.c | 151 ++++++++++++++++++++++++++++++++++-
>  2 files changed, 159 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
> index 4ebea57bf4c8..310462346bd8 100644
> --- a/drivers/remoteproc/Kconfig
> +++ b/drivers/remoteproc/Kconfig
> @@ -61,6 +61,15 @@ config MTK_APU
>  
>  	  It's safe to say N here.
>  
> +config MTK_APU_JTAG
> +	bool "Enable support of JTAG"

I think it is better to simply go with "Enable JTAG support"

> +	depends on MTK_APU
> +	help
> +	  Say y to enable support of JTAG.

Same here.

> +	  By default, JTAG will remain disabled until it is enabled using
> +	  debugfs: remoteproc/remoteproc0/jtag. Write 1 to enable it and

s/remoteproc0/remoteprocX

> +	  0 to disable it.
> +
>  config OMAP_REMOTEPROC
>  	tristate "OMAP remoteproc support"
>  	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
> diff --git a/drivers/remoteproc/mtk_apu.c b/drivers/remoteproc/mtk_apu.c
> index 6d2f577cfde5..07157fdc24ba 100644
> --- a/drivers/remoteproc/mtk_apu.c
> +++ b/drivers/remoteproc/mtk_apu.c
> @@ -5,6 +5,7 @@
>  
>  #include <linux/bitops.h>
>  #include <linux/clk.h>
> +#include <linux/debugfs.h>
>  #include <linux/delay.h>
>  #include <linux/highmem.h>
>  #include <linux/interrupt.h>
> @@ -14,6 +15,7 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/of_reserved_mem.h>
> +#include <linux/pinctrl/consumer.h>
>  #include <linux/platform_device.h>
>  #include <linux/remoteproc.h>
>  
> @@ -48,6 +50,11 @@
>  #define CORE_DEFAULT1				(0x00000140)
>  #define CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU	(0x10 << 0)
>  #define CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU	(0x10 << 5)
> +#define CORE_DEFAULT2				(0x00000144)
> +#define CORE_DEFAULT2_DBG_EN			BIT(3)
> +#define CORE_DEFAULT2_NIDEN			BIT(2)
> +#define CORE_DEFAULT2_SPNIDEN			BIT(1)
> +#define CORE_DEFAULT2_SPIDEN			BIT(0)
>  #define CORE_XTENSA_ALTRESETVEC			(0x000001F8)
>  
>  struct mtk_apu_rproc {
> @@ -57,6 +64,13 @@ struct mtk_apu_rproc {
>  	void __iomem *base;
>  	int irq;
>  	struct clk_bulk_data clks[3];
> +
> +#ifdef CONFIG_MTK_APU_JTAG
> +	struct pinctrl *pinctrl;
> +	struct pinctrl_state *pinctrl_jtag;
> +	bool jtag_enabled;
> +	struct mutex jtag_mutex;

Move this up to keep all the struct together.

> +#endif
>  };
>  
>  static int mtk_apu_rproc_prepare(struct rproc *rproc)
> @@ -166,6 +180,137 @@ static irqreturn_t handle_event(int irq, void *data)
>  	return IRQ_HANDLED;
>  }
>  
> +#ifdef CONFIG_MTK_APU_JTAG
> +
> +static int apu_enable_jtag(struct mtk_apu_rproc *apu_rproc)
> +{
> +	int ret = 0;
> +
> +	mutex_lock(&apu_rproc->jtag_mutex);
> +	if (apu_rproc->jtag_enabled) {
> +		ret = -EINVAL;

The JTAG is already enabled, I think enabling it again isn't a big deal and
should simply return 0 rather than an error.

> +		goto err_mutex_unlock;
> +	}
> +
> +	writel(CORE_DEFAULT2_SPNIDEN | CORE_DEFAULT2_SPIDEN |
> +		CORE_DEFAULT2_NIDEN | CORE_DEFAULT2_DBG_EN,
> +		apu_rproc->base + CORE_DEFAULT2);
> +
> +	apu_rproc->jtag_enabled = 1;

s/1/true

> +
> +err_mutex_unlock:
> +	mutex_unlock(&apu_rproc->jtag_mutex);
> +
> +	return ret;
> +}
> +
> +static int apu_disable_jtag(struct mtk_apu_rproc *apu_rproc)
> +{
> +	int ret = 0;
> +
> +	mutex_lock(&apu_rproc->jtag_mutex);
> +	if (!apu_rproc->jtag_enabled) {
> +		ret = -EINVAL;

Same as above

> +		goto err_mutex_unlock;
> +	}
> +
> +	writel(0, apu_rproc->base + CORE_DEFAULT2);
> +
> +	apu_rproc->jtag_enabled = 0;

s/0/false

Thanks for the patience,
Mathieu

> +
> +err_mutex_unlock:
> +	mutex_unlock(&apu_rproc->jtag_mutex);
> +
> +	return ret;
> +}
> +
> +static ssize_t rproc_jtag_read(struct file *filp, char __user *userbuf,
> +			       size_t count, loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	struct mtk_apu_rproc *apu_rproc = (struct mtk_apu_rproc *)rproc->priv;
> +	char *buf = apu_rproc->jtag_enabled ? "enabled\n" : "disabled\n";
> +
> +	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
> +}
> +
> +static ssize_t rproc_jtag_write(struct file *filp, const char __user *user_buf,
> +				size_t count, loff_t *ppos)
> +{
> +	struct rproc *rproc = filp->private_data;
> +	struct mtk_apu_rproc *apu_rproc = (struct mtk_apu_rproc *)rproc->priv;
> +	char buf[10];
> +	int ret;
> +
> +	if (count < 1 || count > sizeof(buf))
> +		return -EINVAL;
> +
> +	ret = copy_from_user(buf, user_buf, count);
> +	if (ret)
> +		return -EFAULT;
> +
> +	/* remove end of line */
> +	if (buf[count - 1] == '\n')
> +		buf[count - 1] = '\0';
> +
> +	if (!strncmp(buf, "enabled", count))
> +		ret = apu_enable_jtag(apu_rproc);
> +	else if (!strncmp(buf, "disabled", count))
> +		ret = apu_disable_jtag(apu_rproc);
> +	else
> +		return -EINVAL;
> +
> +	return ret ? ret : count;
> +}
> +
> +static const struct file_operations rproc_jtag_ops = {
> +	.read = rproc_jtag_read,
> +	.write = rproc_jtag_write,
> +	.open = simple_open,
> +};
> +
> +static int apu_jtag_probe(struct mtk_apu_rproc *apu_rproc)
> +{
> +	int ret;
> +
> +	if (!apu_rproc->rproc->dbg_dir)
> +		return -ENODEV;
> +
> +	apu_rproc->pinctrl = devm_pinctrl_get(apu_rproc->dev);
> +	if (IS_ERR(apu_rproc->pinctrl)) {
> +		dev_warn(apu_rproc->dev, "Failed to find JTAG pinctrl\n");
> +		return PTR_ERR(apu_rproc->pinctrl);
> +	}
> +
> +	apu_rproc->pinctrl_jtag = pinctrl_lookup_state(apu_rproc->pinctrl,
> +						       "jtag");
> +	if (IS_ERR(apu_rproc->pinctrl_jtag))
> +		return PTR_ERR(apu_rproc->pinctrl_jtag);
> +
> +	ret = pinctrl_select_state(apu_rproc->pinctrl,
> +				   apu_rproc->pinctrl_jtag);
> +	if (ret < 0)
> +		return ret;
> +
> +	mutex_init(&apu_rproc->jtag_mutex);
> +
> +	debugfs_create_file("jtag", 0600, apu_rproc->rproc->dbg_dir,
> +			    apu_rproc->rproc, &rproc_jtag_ops);
> +
> +	return 0;
> +}
> +#else
> +static int apu_jtag_probe(struct mtk_apu_rproc *apu_rproc)
> +{
> +	return 0;
> +}
> +
> +static int apu_disable_jtag(struct mtk_apu_rproc *apu_rproc)
> +{
> +	return 0;
> +}
> +#endif /* CONFIG_MTK_APU_JTAG */
> +
>  static int mtk_apu_rproc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
> @@ -242,6 +387,10 @@ static int mtk_apu_rproc_probe(struct platform_device *pdev)
>  		goto free_mem;
>  	}
>  
> +	ret = apu_jtag_probe(apu_rproc);
> +	if (ret)
> +		dev_warn(dev, "Failed to configure jtag\n");
> +
>  	return 0;
>  
>  free_mem:
> @@ -259,7 +408,7 @@ static int mtk_apu_rproc_remove(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  
>  	disable_irq(apu_rproc->irq);
> -
> +	apu_disable_jtag(apu_rproc);
>  	rproc_del(rproc);
>  	of_reserved_mem_device_release(dev);
>  	rproc_free(rproc);
> -- 
> 2.26.2
>
diff mbox series

Patch

diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index 4ebea57bf4c8..310462346bd8 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -61,6 +61,15 @@  config MTK_APU
 
 	  It's safe to say N here.
 
+config MTK_APU_JTAG
+	bool "Enable support of JTAG"
+	depends on MTK_APU
+	help
+	  Say y to enable support of JTAG.
+	  By default, JTAG will remain disabled until it is enabled using
+	  debugfs: remoteproc/remoteproc0/jtag. Write 1 to enable it and
+	  0 to disable it.
+
 config OMAP_REMOTEPROC
 	tristate "OMAP remoteproc support"
 	depends on ARCH_OMAP4 || SOC_OMAP5 || SOC_DRA7XX
diff --git a/drivers/remoteproc/mtk_apu.c b/drivers/remoteproc/mtk_apu.c
index 6d2f577cfde5..07157fdc24ba 100644
--- a/drivers/remoteproc/mtk_apu.c
+++ b/drivers/remoteproc/mtk_apu.c
@@ -5,6 +5,7 @@ 
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <linux/delay.h>
 #include <linux/highmem.h>
 #include <linux/interrupt.h>
@@ -14,6 +15,7 @@ 
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_reserved_mem.h>
+#include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
 #include <linux/remoteproc.h>
 
@@ -48,6 +50,11 @@ 
 #define CORE_DEFAULT1				(0x00000140)
 #define CORE_DEFAULT0_ARUSER_IDMA_USE_IOMMU	(0x10 << 0)
 #define CORE_DEFAULT0_AWUSER_IDMA_USE_IOMMU	(0x10 << 5)
+#define CORE_DEFAULT2				(0x00000144)
+#define CORE_DEFAULT2_DBG_EN			BIT(3)
+#define CORE_DEFAULT2_NIDEN			BIT(2)
+#define CORE_DEFAULT2_SPNIDEN			BIT(1)
+#define CORE_DEFAULT2_SPIDEN			BIT(0)
 #define CORE_XTENSA_ALTRESETVEC			(0x000001F8)
 
 struct mtk_apu_rproc {
@@ -57,6 +64,13 @@  struct mtk_apu_rproc {
 	void __iomem *base;
 	int irq;
 	struct clk_bulk_data clks[3];
+
+#ifdef CONFIG_MTK_APU_JTAG
+	struct pinctrl *pinctrl;
+	struct pinctrl_state *pinctrl_jtag;
+	bool jtag_enabled;
+	struct mutex jtag_mutex;
+#endif
 };
 
 static int mtk_apu_rproc_prepare(struct rproc *rproc)
@@ -166,6 +180,137 @@  static irqreturn_t handle_event(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
+#ifdef CONFIG_MTK_APU_JTAG
+
+static int apu_enable_jtag(struct mtk_apu_rproc *apu_rproc)
+{
+	int ret = 0;
+
+	mutex_lock(&apu_rproc->jtag_mutex);
+	if (apu_rproc->jtag_enabled) {
+		ret = -EINVAL;
+		goto err_mutex_unlock;
+	}
+
+	writel(CORE_DEFAULT2_SPNIDEN | CORE_DEFAULT2_SPIDEN |
+		CORE_DEFAULT2_NIDEN | CORE_DEFAULT2_DBG_EN,
+		apu_rproc->base + CORE_DEFAULT2);
+
+	apu_rproc->jtag_enabled = 1;
+
+err_mutex_unlock:
+	mutex_unlock(&apu_rproc->jtag_mutex);
+
+	return ret;
+}
+
+static int apu_disable_jtag(struct mtk_apu_rproc *apu_rproc)
+{
+	int ret = 0;
+
+	mutex_lock(&apu_rproc->jtag_mutex);
+	if (!apu_rproc->jtag_enabled) {
+		ret = -EINVAL;
+		goto err_mutex_unlock;
+	}
+
+	writel(0, apu_rproc->base + CORE_DEFAULT2);
+
+	apu_rproc->jtag_enabled = 0;
+
+err_mutex_unlock:
+	mutex_unlock(&apu_rproc->jtag_mutex);
+
+	return ret;
+}
+
+static ssize_t rproc_jtag_read(struct file *filp, char __user *userbuf,
+			       size_t count, loff_t *ppos)
+{
+	struct rproc *rproc = filp->private_data;
+	struct mtk_apu_rproc *apu_rproc = (struct mtk_apu_rproc *)rproc->priv;
+	char *buf = apu_rproc->jtag_enabled ? "enabled\n" : "disabled\n";
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
+}
+
+static ssize_t rproc_jtag_write(struct file *filp, const char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	struct rproc *rproc = filp->private_data;
+	struct mtk_apu_rproc *apu_rproc = (struct mtk_apu_rproc *)rproc->priv;
+	char buf[10];
+	int ret;
+
+	if (count < 1 || count > sizeof(buf))
+		return -EINVAL;
+
+	ret = copy_from_user(buf, user_buf, count);
+	if (ret)
+		return -EFAULT;
+
+	/* remove end of line */
+	if (buf[count - 1] == '\n')
+		buf[count - 1] = '\0';
+
+	if (!strncmp(buf, "enabled", count))
+		ret = apu_enable_jtag(apu_rproc);
+	else if (!strncmp(buf, "disabled", count))
+		ret = apu_disable_jtag(apu_rproc);
+	else
+		return -EINVAL;
+
+	return ret ? ret : count;
+}
+
+static const struct file_operations rproc_jtag_ops = {
+	.read = rproc_jtag_read,
+	.write = rproc_jtag_write,
+	.open = simple_open,
+};
+
+static int apu_jtag_probe(struct mtk_apu_rproc *apu_rproc)
+{
+	int ret;
+
+	if (!apu_rproc->rproc->dbg_dir)
+		return -ENODEV;
+
+	apu_rproc->pinctrl = devm_pinctrl_get(apu_rproc->dev);
+	if (IS_ERR(apu_rproc->pinctrl)) {
+		dev_warn(apu_rproc->dev, "Failed to find JTAG pinctrl\n");
+		return PTR_ERR(apu_rproc->pinctrl);
+	}
+
+	apu_rproc->pinctrl_jtag = pinctrl_lookup_state(apu_rproc->pinctrl,
+						       "jtag");
+	if (IS_ERR(apu_rproc->pinctrl_jtag))
+		return PTR_ERR(apu_rproc->pinctrl_jtag);
+
+	ret = pinctrl_select_state(apu_rproc->pinctrl,
+				   apu_rproc->pinctrl_jtag);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&apu_rproc->jtag_mutex);
+
+	debugfs_create_file("jtag", 0600, apu_rproc->rproc->dbg_dir,
+			    apu_rproc->rproc, &rproc_jtag_ops);
+
+	return 0;
+}
+#else
+static int apu_jtag_probe(struct mtk_apu_rproc *apu_rproc)
+{
+	return 0;
+}
+
+static int apu_disable_jtag(struct mtk_apu_rproc *apu_rproc)
+{
+	return 0;
+}
+#endif /* CONFIG_MTK_APU_JTAG */
+
 static int mtk_apu_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -242,6 +387,10 @@  static int mtk_apu_rproc_probe(struct platform_device *pdev)
 		goto free_mem;
 	}
 
+	ret = apu_jtag_probe(apu_rproc);
+	if (ret)
+		dev_warn(dev, "Failed to configure jtag\n");
+
 	return 0;
 
 free_mem:
@@ -259,7 +408,7 @@  static int mtk_apu_rproc_remove(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 
 	disable_irq(apu_rproc->irq);
-
+	apu_disable_jtag(apu_rproc);
 	rproc_del(rproc);
 	of_reserved_mem_device_release(dev);
 	rproc_free(rproc);