===================================================================
@@ -0,0 +1,1737 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "../pci.h"
+#include "../ps.h"
+#include "reg.h"
+#include "def.h"
+#include "phy.h"
+#include "rf.h"
+#include "dm.h"
+#include "fw.h"
+#include "hw.h"
+#include "table.h"
+
+static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask)
+{
+ u32 i;
+
+ for (i = 0; i <= 31; i++) {
+ if (((bitmask >> i) & 0x1) == 1)
+ break;
+ }
+ return i;
+}
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 returnvalue = 0, originalvalue, bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x)\n",
+ regaddr, bitmask));
+
+ originalvalue = rtl_read_dword(rtlpriv, regaddr);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ returnvalue = (originalvalue & bitmask) >> bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ ("BBR MASK=0x%x Addr[0x%x]=0x%x\n",
+ bitmask, regaddr, originalvalue));
+
+ return returnvalue;
+}
+
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 originalvalue, bitshift;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+ " data(%#x)\n", regaddr, bitmask, data));
+
+ if (bitmask != MASKDWORD) {
+ originalvalue = rtl_read_dword(rtlpriv, regaddr);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ data = ((originalvalue & (~bitmask)) | (data << bitshift));
+ }
+
+ rtl_write_dword(rtlpriv, regaddr, data);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+ " data(%#x)\n", regaddr, bitmask, data));
+}
+
+static u32 _rtl92s_phy_rf_serial_read(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset)
+{
+
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+ u32 newoffset;
+ u32 tmplong, tmplong2;
+ u8 rfpi_enable = 0;
+ u32 retvalue = 0;
+
+ offset &= 0x3f;
+ newoffset = offset;
+ tmplong = rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD);
+
+ if (rfpath == RF90_PATH_A)
+ tmplong2 = tmplong;
+ else
+ tmplong2 = rtl_get_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD);
+
+ tmplong2 = (tmplong2 & (~BLSSI_READADDRESS)) | (newoffset << 23) |
+ BLSSI_READEDGE;
+
+ rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD,
+ tmplong & (~BLSSI_READEDGE));
+
+ mdelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfhssi_para2, MASKDWORD, tmplong2);
+ mdelay(1);
+
+ rtl_set_bbreg(hw, RFPGA0_XA_HSSIPARAMETER2, MASKDWORD, tmplong |
+ BLSSI_READEDGE);
+ mdelay(1);
+
+ if (rfpath == RF90_PATH_A)
+ rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XA_HSSIPARAMETER1,
+ BIT(8));
+ else if (rfpath == RF90_PATH_B)
+ rfpi_enable = (u8)rtl_get_bbreg(hw, RFPGA0_XB_HSSIPARAMETER1,
+ BIT(8));
+
+ if (rfpi_enable)
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readbackpi,
+ BLSSI_READBACK_DATA);
+ else
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+ BLSSI_READBACK_DATA);
+
+ retvalue = rtl_get_bbreg(hw, pphyreg->rflssi_readback,
+ BLSSI_READBACK_DATA);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFR-%d Addr[0x%x]=0x%x\n",
+ rfpath, pphyreg->rflssi_readback, retvalue));
+
+ return retvalue;
+}
+
+static void _rtl92s_phy_rf_serial_write(struct ieee80211_hw *hw,
+ enum radio_path rfpath, u32 offset,
+ u32 data)
+{
+ u32 data_and_addr = 0;
+ u32 newoffset;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct bb_reg_def *pphyreg = &rtlphy->phyreg_def[rfpath];
+
+ offset &= 0x3f;
+ newoffset = offset;
+ data_and_addr = ((newoffset << 20) | (data & 0x000fffff)) & 0x0fffffff;
+ rtl_set_bbreg(hw, pphyreg->rf3wire_offset, MASKDWORD, data_and_addr);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("RFW-%d Addr[0x%x]=0x%x\n",
+ rfpath, pphyreg->rf3wire_offset, data_and_addr));
+}
+
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 original_value, readback_value, bitshift;
+ unsigned long flags;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+ "bitmask(%#x)\n", regaddr, rfpath, bitmask));
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+ original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr);
+
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ readback_value = (original_value & bitmask) >> bitshift;
+
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), rfpath(%#x), "
+ "bitmask(%#x), original_value(%#x)\n", regaddr, rfpath,
+ bitmask, original_value));
+
+ return readback_value;
+}
+
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 original_value, bitshift;
+ unsigned long flags;
+
+ if (!((rtlphy->rf_pathmap >> rfpath) & 0x1))
+ return;
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x),"
+ " data(%#x), rfpath(%#x)\n", regaddr, bitmask, data,
+ rfpath));
+
+ spin_lock_irqsave(&rtlpriv->locks.rf_lock, flags);
+
+ if (bitmask != RFREG_OFFSET_MASK) {
+ original_value = _rtl92s_phy_rf_serial_read(hw, rfpath,
+ regaddr);
+ bitshift = _rtl92s_phy_calculate_bit_shift(bitmask);
+ data = ((original_value & (~bitmask)) | (data << bitshift));
+ }
+
+ _rtl92s_phy_rf_serial_write(hw, rfpath, regaddr, data);
+
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_lock, flags);
+
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, ("regaddr(%#x), bitmask(%#x), "
+ "data(%#x), rfpath(%#x)\n", regaddr, bitmask, data, rfpath));
+}
+
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw,
+ u8 operation)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+ if (!is_hal_stop(rtlhal)) {
+ switch (operation) {
+ case SCAN_OPT_BACKUP:
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_PAUSE_DM_BY_SCAN);
+ break;
+ case SCAN_OPT_RESTORE:
+ rtl92s_phy_set_fw_cmd(hw, FW_CMD_RESUME_DM_BY_SCAN);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("Unknown operation.\n"));
+ break;
+ }
+ }
+}
+
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ u8 reg_bw_opmode;
+ u8 reg_prsr_rsc;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("Switch to %s bandwidth\n",
+ rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20 ?
+ "20MHz" : "40MHz"));
+
+ if (rtlphy->set_bwmode_inprogress)
+ return;
+ if (is_hal_stop(rtlhal))
+ return;
+
+ rtlphy->set_bwmode_inprogress = true;
+
+ reg_bw_opmode = rtl_read_byte(rtlpriv, BW_OPMODE);
+ reg_prsr_rsc = rtl_read_byte(rtlpriv, RRSR + 2);
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ reg_bw_opmode |= BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ reg_bw_opmode &= ~BW_OPMODE_20MHZ;
+ rtl_write_byte(rtlpriv, BW_OPMODE, reg_bw_opmode);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+ break;
+ }
+
+ switch (rtlphy->current_chan_bw) {
+ case HT_CHANNEL_WIDTH_20:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x0);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x0);
+
+ if (rtlhal->version >= VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x58);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtl_set_bbreg(hw, RFPGA0_RFMOD, BRFMOD, 0x1);
+ rtl_set_bbreg(hw, RFPGA1_RFMOD, BRFMOD, 0x1);
+
+ rtl_set_bbreg(hw, RCCK0_SYSTEM, BCCK_SIDEBAND,
+ (mac->cur_40_prime_sc >> 1));
+ rtl_set_bbreg(hw, ROFDM1_LSTF, 0xC00, mac->cur_40_prime_sc);
+
+ if (rtlhal->version >= VERSION_8192S_BCUT)
+ rtl_write_byte(rtlpriv, RFPGA0_ANALOGPARAMETER2, 0x18);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n", rtlphy->current_chan_bw));
+ break;
+ }
+
+ rtl92s_phy_rf6052_set_bandwidth(hw, rtlphy->current_chan_bw);
+ rtlphy->set_bwmode_inprogress = false;
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+}
+
+static bool _rtl92s_phy_set_sw_chnl_cmdarray(struct swchnlcmd *cmdtable,
+ u32 cmdtableidx, u32 cmdtablesz, enum swchnlcmd_id cmdid,
+ u32 para1, u32 para2, u32 msdelay)
+{
+ struct swchnlcmd *pcmd;
+
+ if (cmdtable == NULL) {
+ RT_ASSERT(false, ("cmdtable cannot be NULL.\n"));
+ return false;
+ }
+
+ if (cmdtableidx >= cmdtablesz)
+ return false;
+
+ pcmd = cmdtable + cmdtableidx;
+ pcmd->cmdid = cmdid;
+ pcmd->para1 = para1;
+ pcmd->para2 = para2;
+ pcmd->msdelay = msdelay;
+ return true;
+}
+
+static bool _rtl92s_phy_sw_chnl_step_by_step(struct ieee80211_hw *hw,
+ u8 channel, u8 *stage, u8 *step, u32 *delay)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct swchnlcmd precommoncmd[MAX_PRECMD_CNT];
+ u32 precommoncmdcnt;
+ struct swchnlcmd postcommoncmd[MAX_POSTCMD_CNT];
+ u32 postcommoncmdcnt;
+ struct swchnlcmd rfdependcmd[MAX_RFDEPENDCMD_CNT];
+ u32 rfdependcmdcnt;
+ struct swchnlcmd *currentcmd = NULL;
+ u8 rfpath;
+ u8 num_total_rfpath = rtlphy->num_total_rfpath;
+
+ precommoncmdcnt = 0;
+ _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+ MAX_PRECMD_CNT, CMDID_SET_TXPOWEROWER_LEVEL, 0, 0, 0);
+ _rtl92s_phy_set_sw_chnl_cmdarray(precommoncmd, precommoncmdcnt++,
+ MAX_PRECMD_CNT, CMDID_END, 0, 0, 0);
+
+ postcommoncmdcnt = 0;
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(postcommoncmd, postcommoncmdcnt++,
+ MAX_POSTCMD_CNT, CMDID_END, 0, 0, 0);
+
+ rfdependcmdcnt = 0;
+
+ RT_ASSERT((channel >= 1 && channel <= 14),
+ ("illegal channel for Zebra: %d\n", channel));
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+ MAX_RFDEPENDCMD_CNT, CMDID_RF_WRITEREG, RF_CHNLBW,
+ channel, 10);
+
+ _rtl92s_phy_set_sw_chnl_cmdarray(rfdependcmd, rfdependcmdcnt++,
+ MAX_RFDEPENDCMD_CNT, CMDID_END, 0, 0, 0);
+
+ do {
+ switch (*stage) {
+ case 0:
+ currentcmd = &precommoncmd[*step];
+ break;
+ case 1:
+ currentcmd = &rfdependcmd[*step];
+ break;
+ case 2:
+ currentcmd = &postcommoncmd[*step];
+ break;
+ }
+
+ if (currentcmd->cmdid == CMDID_END) {
+ if ((*stage) == 2) {
+ return true;
+ } else {
+ (*stage)++;
+ (*step) = 0;
+ continue;
+ }
+ }
+
+ switch (currentcmd->cmdid) {
+ case CMDID_SET_TXPOWEROWER_LEVEL:
+ rtl92s_phy_set_txpower(hw, channel);
+ break;
+ case CMDID_WRITEPORT_ULONG:
+ rtl_write_dword(rtlpriv, currentcmd->para1,
+ currentcmd->para2);
+ break;
+ case CMDID_WRITEPORT_USHORT:
+ rtl_write_word(rtlpriv, currentcmd->para1,
+ (u16)currentcmd->para2);
+ break;
+ case CMDID_WRITEPORT_UCHAR:
+ rtl_write_byte(rtlpriv, currentcmd->para1,
+ (u8)currentcmd->para2);
+ break;
+ case CMDID_RF_WRITEREG:
+ for (rfpath = 0; rfpath < num_total_rfpath; rfpath++) {
+ rtlphy->rfreg_chnlval[rfpath] =
+ ((rtlphy->rfreg_chnlval[rfpath] &
+ 0xfffffc00) | currentcmd->para2);
+ rtl_set_rfreg(hw, (enum radio_path)rfpath,
+ currentcmd->para1,
+ RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[rfpath]);
+ }
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+
+ break;
+ } while (true);
+
+ (*delay) = currentcmd->msdelay;
+ (*step)++;
+ return false;
+}
+
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 delay;
+ bool ret;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("switch to channel%d\n",
+ rtlphy->current_channel));
+
+ if (rtlphy->sw_chnl_inprogress)
+ return 0;
+
+ if (rtlphy->set_bwmode_inprogress)
+ return 0;
+
+ if (is_hal_stop(rtlhal))
+ return 0;
+
+ rtlphy->sw_chnl_inprogress = true;
+ rtlphy->sw_chnl_stage = 0;
+ rtlphy->sw_chnl_step = 0;
+
+ do {
+ if (!rtlphy->sw_chnl_inprogress)
+ break;
+
+ ret = _rtl92s_phy_sw_chnl_step_by_step(hw,
+ rtlphy->current_channel,
+ &rtlphy->sw_chnl_stage,
+ &rtlphy->sw_chnl_step,
+ &delay);
+ if (!ret) {
+ if (delay > 0)
+ mdelay(delay);
+ else
+ continue;
+ } else {
+ rtlphy->sw_chnl_inprogress = false;
+ }
+ break;
+ } while (true);
+
+ rtlphy->sw_chnl_inprogress = false;
+
+ RT_TRACE(rtlpriv, COMP_SCAN, DBG_TRACE, ("<==\n"));
+
+ return 1;
+}
+
+static void _rtl92se_phy_set_rf_sleep(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u8 u1btmp;
+
+ u1btmp = rtl_read_byte(rtlpriv, LDOV12D_CTRL);
+ u1btmp |= BIT(0);
+
+ rtl_write_byte(rtlpriv, LDOV12D_CTRL, u1btmp);
+ rtl_write_byte(rtlpriv, SPS1_CTRL, 0x0);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0xFF);
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+ udelay(100);
+
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x0);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x77FC);
+ udelay(10);
+
+ rtl_write_word(rtlpriv, CMDR, 0x57FC);
+
+ /* we should chnge GPIO to input mode
+ * this will drop away current about 25mA*/
+ rtl8192se_gpiobit3_cfg_inputmode(hw);
+}
+
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpwr_state)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ bool bresult = true;
+ u8 i, queue_id;
+ struct rtl8192_tx_ring *ring = NULL;
+
+ if (rfpwr_state == ppsc->rfpwr_state)
+ return false;
+
+ ppsc->set_rfpowerstate_inprogress = true;
+
+ switch (rfpwr_state) {
+ case ERFON:{
+ if ((ppsc->rfpwr_state == ERFOFF) &&
+ RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC)) {
+
+ bool rtstatus;
+ u32 InitializeCount = 0;
+ do {
+ InitializeCount++;
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("IPS Set eRf nic enable\n"));
+ rtstatus = rtl_ps_enable_nic(hw);
+ } while ((rtstatus != true) &&
+ (InitializeCount < 10));
+
+ RT_CLEAR_PS_LEVEL(ppsc,
+ RT_RF_OFF_LEVL_HALT_NIC);
+ } else {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ ("awake, sleeped:%d ms "
+ "state_inap:%x\n",
+ jiffies_to_msecs(jiffies -
+ ppsc->last_sleep_jiffies),
+ rtlpriv->psc.state_inap));
+ ppsc->last_awake_jiffies = jiffies;
+ rtl_write_word(rtlpriv, CMDR, 0x37FC);
+ rtl_write_byte(rtlpriv, TXPAUSE, 0x00);
+ rtl_write_byte(rtlpriv, PHY_CCA, 0x3);
+ }
+
+ if (mac->link_state == MAC80211_LINKED)
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_LINK);
+ else
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_NO_LINK);
+ break;
+ }
+ case ERFOFF:{
+ for (queue_id = 0, i = 0;
+ queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+ ring = &pcipriv->dev.tx_ring[queue_id];
+ if (skb_queue_len(&ring->queue) == 0 ||
+ queue_id == BEACON_QUEUE) {
+ queue_id++;
+ continue;
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("eRf Off/Sleep: "
+ "%d times TcbBusyQueue[%d] =%d"
+ " before doze!\n",
+ (i + 1), queue_id,
+ skb_queue_len(&ring->queue)));
+
+ udelay(10);
+ i++;
+ }
+
+ if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("\nERFOFF: %d times"
+ "TcbBusyQueue[%d] = %d !\n",
+ MAX_DOZE_WAITING_TIMES_9x,
+ queue_id,
+ skb_queue_len(&ring->queue)));
+ break;
+ }
+ }
+
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_HALT_NIC) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("IPS Set eRf nic disable\n"));
+ rtl_ps_disable_nic(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ } else {
+ if (ppsc->rfoff_reason == RF_CHANGE_BY_IPS)
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_NO_LINK);
+ else
+ rtlpriv->cfg->ops->led_control(hw,
+ LED_CTL_POWER_OFF);
+ }
+ break;
+ }
+ case ERFSLEEP:
+ if (ppsc->rfpwr_state == ERFOFF)
+ break;
+
+ for (queue_id = 0, i = 0;
+ queue_id < RTL_PCI_MAX_TX_QUEUE_COUNT;) {
+ ring = &pcipriv->dev.tx_ring[queue_id];
+ if (skb_queue_len(&ring->queue) == 0 ||
+ queue_id == BEACON_QUEUE) {
+ queue_id++;
+ continue;
+ } else {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("eRf Off/Sleep: "
+ "%d times TcbBusyQueue[%d] =%d"
+ " before doze!\n",
+ (i + 1), queue_id,
+ skb_queue_len(&ring->queue)));
+
+ udelay(10);
+ i++;
+ }
+
+ if (i >= MAX_DOZE_WAITING_TIMES_9x) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("\nERFOFF: %d times"
+ "TcbBusyQueue[%d] = %d !\n",
+ MAX_DOZE_WAITING_TIMES_9x,
+ queue_id,
+ skb_queue_len(&ring->queue)));
+ break;
+ }
+ }
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ ("Set ERFSLEEP awaked:%d ms\n",
+ jiffies_to_msecs(jiffies -
+ ppsc->last_awake_jiffies)));
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG,
+ ("sleep awaked:%d ms "
+ "state_inap:%x\n", jiffies_to_msecs(jiffies -
+ ppsc->last_awake_jiffies),
+ rtlpriv->psc.state_inap));
+ ppsc->last_sleep_jiffies = jiffies;
+ _rtl92se_phy_set_rf_sleep(hw);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ bresult = false;
+ break;
+ }
+
+ if (bresult)
+ ppsc->rfpwr_state = rfpwr_state;
+
+ ppsc->set_rfpowerstate_inprogress = false;
+
+ return bresult;
+}
+
+static bool _rtl92s_phy_config_rfpa_bias_current(struct ieee80211_hw *hw,
+ enum radio_path rfpath)
+{
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+
+ /* If inferiority IC, we have to increase the PA bias current */
+ if (rtlhal->ic_class != IC_INFERIORITY_A) {
+ u32 tmpval = rtl92s_phy_query_rf_reg(hw, rfpath, RF_IPA, 0xf);
+ rtl92s_phy_set_rf_reg(hw, rfpath, RF_IPA, 0xf, tmpval + 1);
+ }
+ return true;
+}
+
+static void _rtl92s_store_pwrindex_diffrate_offset(struct ieee80211_hw *hw,
+ u32 reg_addr, u32 bitmask, u32 data)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ if (reg_addr == RTXAGC_RATE18_06)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][0] =
+ data;
+ if (reg_addr == RTXAGC_RATE54_24)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][1] =
+ data;
+ if (reg_addr == RTXAGC_CCK_MCS32)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][6] =
+ data;
+ if (reg_addr == RTXAGC_MCS03_MCS00)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][2] =
+ data;
+ if (reg_addr == RTXAGC_MCS07_MCS04)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][3] =
+ data;
+ if (reg_addr == RTXAGC_MCS11_MCS08)
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][4] =
+ data;
+ if (reg_addr == RTXAGC_MCS15_MCS12) {
+ rtlphy->mcs_txpwrlevel_origoffset[rtlphy->pwrgroup_cnt][5] =
+ data;
+ rtlphy->pwrgroup_cnt++;
+ }
+}
+
+static void _rtl92s_phy_init_register_definition(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /*RF Interface Sowrtware Control */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfs = RFPGA0_XAB_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfs = RFPGA0_XCD_RFINTERFACESW;
+
+ /* RF Interface Readback Value */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfi = RFPGA0_XAB_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfi = RFPGA0_XCD_RFINTERFACERB;
+
+ /* RF Interface Output (and Enable) */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfo = RFPGA0_XA_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfo = RFPGA0_XB_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfo = RFPGA0_XC_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfo = RFPGA0_XD_RFINTERFACEOE;
+
+ /* RF Interface (Output and) Enable */
+ rtlphy->phyreg_def[RF90_PATH_A].rfintfe = RFPGA0_XA_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfintfe = RFPGA0_XB_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfintfe = RFPGA0_XC_RFINTERFACEOE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfintfe = RFPGA0_XD_RFINTERFACEOE;
+
+ /* Addr of LSSI. Wirte RF register by driver */
+ rtlphy->phyreg_def[RF90_PATH_A].rf3wire_offset =
+ RFPGA0_XA_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_B].rf3wire_offset =
+ RFPGA0_XB_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_C].rf3wire_offset =
+ RFPGA0_XC_LSSIPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_D].rf3wire_offset =
+ RFPGA0_XD_LSSIPARAMETER;
+
+ /* RF parameter */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_select = RFPGA0_XAB_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_C].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+ rtlphy->phyreg_def[RF90_PATH_D].rflssi_select = RFPGA0_XCD_RFPARAMETER;
+
+ /* Tx AGC Gain Stage (same for all path. Should we remove this?) */
+ rtlphy->phyreg_def[RF90_PATH_A].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftxgain_stage = RFPGA0_TXGAINSTAGE;
+
+ /* Tranceiver A~D HSSI Parameter-1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para1 = RFPGA0_XA_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para1 = RFPGA0_XB_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para1 = RFPGA0_XC_HSSIPARAMETER1;
+ rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para1 = RFPGA0_XD_HSSIPARAMETER1;
+
+ /* Tranceiver A~D HSSI Parameter-2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfhssi_para2 =
+ RFPGA0_XA_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_B].rfhssi_para2 =
+ RFPGA0_XB_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_C].rfhssi_para2 =
+ RFPGA0_XC_HSSIPARAMETER2;
+ rtlphy->phyreg_def[RF90_PATH_D].rfhssi_para2 =
+ RFPGA0_XD_HSSIPARAMETER2;
+
+ /* RF switch Control */
+ rtlphy->phyreg_def[RF90_PATH_A].rfswitch_control =
+ RFPGA0_XAB_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_B].rfswitch_control =
+ RFPGA0_XAB_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_C].rfswitch_control =
+ RFPGA0_XCD_SWITCHCONTROL;
+ rtlphy->phyreg_def[RF90_PATH_D].rfswitch_control =
+ RFPGA0_XCD_SWITCHCONTROL;
+
+ /* AGC control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfagc_control1 = ROFDM0_XAAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_B].rfagc_control1 = ROFDM0_XBAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_C].rfagc_control1 = ROFDM0_XCAGCCORE1;
+ rtlphy->phyreg_def[RF90_PATH_D].rfagc_control1 = ROFDM0_XDAGCCORE1;
+
+ /* AGC control 2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfagc_control2 = ROFDM0_XAAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_B].rfagc_control2 = ROFDM0_XBAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_C].rfagc_control2 = ROFDM0_XCAGCCORE2;
+ rtlphy->phyreg_def[RF90_PATH_D].rfagc_control2 = ROFDM0_XDAGCCORE2;
+
+ /* RX AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfrxiq_imbalance =
+ ROFDM0_XARXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfrxiq_imbalance =
+ ROFDM0_XBRXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfrxiq_imbalance =
+ ROFDM0_XCRXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfrxiq_imbalance =
+ ROFDM0_XDRXIQIMBALANCE;
+
+ /* RX AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rfrx_afe = ROFDM0_XARXAFE;
+ rtlphy->phyreg_def[RF90_PATH_B].rfrx_afe = ROFDM0_XBRXAFE;
+ rtlphy->phyreg_def[RF90_PATH_C].rfrx_afe = ROFDM0_XCRXAFE;
+ rtlphy->phyreg_def[RF90_PATH_D].rfrx_afe = ROFDM0_XDRXAFE;
+
+ /* Tx AFE control 1 */
+ rtlphy->phyreg_def[RF90_PATH_A].rftxiq_imbalance =
+ ROFDM0_XATXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftxiq_imbalance =
+ ROFDM0_XBTXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftxiq_imbalance =
+ ROFDM0_XCTXIQIMBALANCE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftxiq_imbalance =
+ ROFDM0_XDTXIQIMBALANCE;
+
+ /* Tx AFE control 2 */
+ rtlphy->phyreg_def[RF90_PATH_A].rftx_afe = ROFDM0_XATXAFE;
+ rtlphy->phyreg_def[RF90_PATH_B].rftx_afe = ROFDM0_XBTXAFE;
+ rtlphy->phyreg_def[RF90_PATH_C].rftx_afe = ROFDM0_XCTXAFE;
+ rtlphy->phyreg_def[RF90_PATH_D].rftx_afe = ROFDM0_XDTXAFE;
+
+ /* Tranceiver LSSI Readback */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_readback =
+ RFPGA0_XA_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_readback =
+ RFPGA0_XB_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_C].rflssi_readback =
+ RFPGA0_XC_LSSIREADBACK;
+ rtlphy->phyreg_def[RF90_PATH_D].rflssi_readback =
+ RFPGA0_XD_LSSIREADBACK;
+
+ /* Tranceiver LSSI Readback PI mode */
+ rtlphy->phyreg_def[RF90_PATH_A].rflssi_readbackpi =
+ TRANSCEIVERA_HSPI_READBACK;
+ rtlphy->phyreg_def[RF90_PATH_B].rflssi_readbackpi =
+ TRANSCEIVERB_HSPI_READBACK;
+}
+
+
+static bool _rtl92s_phy_config_bb(struct ieee80211_hw *hw, u8 configtype)
+{
+ int i;
+ u32 *phy_reg_table;
+ u32 *agc_table;
+ u16 phy_reg_len, agc_len;
+
+ agc_len = AGCTAB_ARRAYLENGTH;
+ agc_table = rtl8192seagctab_array;
+ /* Default RF_type: 2T2R */
+ phy_reg_len = PHY_REG_2T2RARRAYLENGTH;
+ phy_reg_table = rtl8192sephy_reg_2t2rarray;
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_reg_len; i = i + 2) {
+ if (phy_reg_table[i] == 0xfe)
+ mdelay(50);
+ else if (phy_reg_table[i] == 0xfd)
+ mdelay(5);
+ else if (phy_reg_table[i] == 0xfc)
+ mdelay(1);
+ else if (phy_reg_table[i] == 0xfb)
+ udelay(50);
+ else if (phy_reg_table[i] == 0xfa)
+ udelay(5);
+ else if (phy_reg_table[i] == 0xf9)
+ udelay(1);
+
+ /* Add delay for ECS T20 & LG malow platform, */
+ udelay(1);
+
+ rtl92s_phy_set_bb_reg(hw, phy_reg_table[i], MASKDWORD,
+ phy_reg_table[i + 1]);
+ }
+ } else if (configtype == BASEBAND_CONFIG_AGC_TAB) {
+ for (i = 0; i < agc_len; i = i + 2) {
+ rtl92s_phy_set_bb_reg(hw, agc_table[i], MASKDWORD,
+ agc_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+ }
+ return true;
+}
+
+static bool _rtl92s_phy_set_bb_to_diff_rf(struct ieee80211_hw *hw,
+ u8 configtype)
+{
+ int i;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 *phy_regarray2xtxr_table;
+ u16 phy_regarray2xtxr_len;
+
+ if (rtlphy->rf_type == RF_1T1R) {
+ phy_regarray2xtxr_table = rtl8192sephy_changeto_1t1rarray;
+ phy_regarray2xtxr_len = PHY_CHANGETO_1T1RARRAYLENGTH;
+ } else if (rtlphy->rf_type == RF_1T2R) {
+ phy_regarray2xtxr_table = rtl8192sephy_changeto_1t2rarray;
+ phy_regarray2xtxr_len = PHY_CHANGETO_1T2RARRAYLENGTH;
+ } else {
+ return false;
+ }
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_regarray2xtxr_len; i = i + 3) {
+ if (phy_regarray2xtxr_table[i] == 0xfe)
+ mdelay(50);
+ else if (phy_regarray2xtxr_table[i] == 0xfd)
+ mdelay(5);
+ else if (phy_regarray2xtxr_table[i] == 0xfc)
+ mdelay(1);
+ else if (phy_regarray2xtxr_table[i] == 0xfb)
+ udelay(50);
+ else if (phy_regarray2xtxr_table[i] == 0xfa)
+ udelay(5);
+ else if (phy_regarray2xtxr_table[i] == 0xf9)
+ udelay(1);
+
+ rtl92s_phy_set_bb_reg(hw, phy_regarray2xtxr_table[i],
+ phy_regarray2xtxr_table[i + 1],
+ phy_regarray2xtxr_table[i + 2]);
+ }
+ }
+ return true;
+}
+
+static bool _rtl92s_phy_config_bb_with_pg(struct ieee80211_hw *hw,
+ u8 configtype)
+{
+ int i;
+ u32 *phy_table_pg;
+ u16 phy_pg_len;
+
+ phy_pg_len = PHY_REG_ARRAY_PGLENGTH;
+ phy_table_pg = rtl8192sephy_reg_array_pg;
+
+ if (configtype == BASEBAND_CONFIG_PHY_REG) {
+ for (i = 0; i < phy_pg_len; i = i + 3) {
+ if (phy_table_pg[i] == 0xfe)
+ mdelay(50);
+ else if (phy_table_pg[i] == 0xfd)
+ mdelay(5);
+ else if (phy_table_pg[i] == 0xfc)
+ mdelay(1);
+ else if (phy_table_pg[i] == 0xfb)
+ udelay(50);
+ else if (phy_table_pg[i] == 0xfa)
+ udelay(5);
+ else if (phy_table_pg[i] == 0xf9)
+ udelay(1);
+
+ _rtl92s_store_pwrindex_diffrate_offset(hw,
+ phy_table_pg[i],
+ phy_table_pg[i + 1],
+ phy_table_pg[i + 2]);
+ rtl92s_phy_set_bb_reg(hw, phy_table_pg[i],
+ phy_table_pg[i + 1],
+ phy_table_pg[i + 2]);
+ }
+ }
+ return true;
+}
+
+static bool _rtl92s_phy_bb_config_parafile(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ bool rtstatus = true;
+
+ /* 1. Read PHY_REG.TXT BB INIT!! */
+ /* We will seperate as 1T1R/1T2R/1T2R_GREEN/2T2R */
+ if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_2T2R ||
+ rtlphy->rf_type == RF_1T1R || rtlphy->rf_type == RF_2T2R_GREEN) {
+ rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_PHY_REG);
+
+ if (rtlphy->rf_type != RF_2T2R && rtlphy->rf_type !=
+ RF_2T2R_GREEN)
+ /* so we should reconfig BB reg with the right PHY
+ * parameters. */
+ rtstatus = _rtl92s_phy_set_bb_to_diff_rf(
+ hw, BASEBAND_CONFIG_PHY_REG);
+ } else {
+ rtstatus = false;
+ }
+
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("Write BB Reg Fail!!"));
+ return false;
+ }
+
+ /* 2. If EEPROM or EFUSE autoload OK, We must config by
+ * PHY_REG_PG.txt */
+ if (rtlefuse->autoload_failflag == false) {
+ rtlphy->pwrgroup_cnt = 0;
+
+ rtstatus = _rtl92s_phy_config_bb_with_pg(
+ hw, BASEBAND_CONFIG_PHY_REG);
+ }
+ if (!rtstatus) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("_rtl92s_phy_bb_config_parafile():BB_PG Reg Fail!!"));
+ return false;
+ }
+
+ /* 3. BB AGC table Initialization */
+ rtstatus = _rtl92s_phy_config_bb(hw, BASEBAND_CONFIG_AGC_TAB);
+
+ if (!rtstatus) {
+ printk(KERN_ERR "_rtl92s_phy_bb_config_parafile(): "
+ "AGC Table Fail\n");
+ return false;
+ }
+
+ /* Check if the CCK HighPower is turned ON. */
+ /* This is used to calculate PWDB. */
+ rtlphy->cck_high_power = (bool)(rtl92s_phy_query_bb_reg(hw,
+ RFPGA0_XA_HSSIPARAMETER2, 0x200));
+ return rtstatus;
+}
+
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ int i;
+ u32 *radio_a_table;
+ u32 *radio_b_table;
+ u16 radio_a_tblen, radio_b_tblen;
+
+ radio_a_tblen = RADIOA_1T_ARRAYLENGTH;
+ radio_a_table = rtl8192seradioa_1t_array;
+
+ /* Using Green mode array table for RF_2T2R_GREEN */
+ if (rtlphy->rf_type == RF_2T2R_GREEN) {
+ radio_b_table = rtl8192seradiob_gm_array;
+ radio_b_tblen = RADIOB_GM_ARRAYLENGTH;
+ } else {
+ radio_b_table = rtl8192seradiob_array;
+ radio_b_tblen = RADIOB_ARRAYLENGTH;
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Radio No %x\n", rfpath));
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ for (i = 0; i < radio_a_tblen; i = i + 2) {
+ if (radio_a_table[i] == 0xfe)
+ /* Delay specific ms. Only RF configuration
+ * require delay. */
+ mdelay(50);
+ else if (radio_a_table[i] == 0xfd)
+ mdelay(5);
+ else if (radio_a_table[i] == 0xfc)
+ mdelay(1);
+ else if (radio_a_table[i] == 0xfb)
+ udelay(50);
+ else if (radio_a_table[i] == 0xfa)
+ udelay(5);
+ else if (radio_a_table[i] == 0xf9)
+ udelay(1);
+ else
+ rtl92s_phy_set_rf_reg(hw, rfpath,
+ radio_a_table[i],
+ MASK20BITS,
+ radio_a_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+
+ /* PA Bias current for inferiority IC */
+ _rtl92s_phy_config_rfpa_bias_current(hw, rfpath);
+ break;
+ case RF90_PATH_B:
+ for (i = 0; i < radio_b_tblen; i = i + 2) {
+ if (radio_b_table[i] == 0xfe)
+ /* Delay specific ms. Only RF configuration
+ * require delay.*/
+ mdelay(50);
+ else if (radio_b_table[i] == 0xfd)
+ mdelay(5);
+ else if (radio_b_table[i] == 0xfc)
+ mdelay(1);
+ else if (radio_b_table[i] == 0xfb)
+ udelay(50);
+ else if (radio_b_table[i] == 0xfa)
+ udelay(5);
+ else if (radio_b_table[i] == 0xf9)
+ udelay(1);
+ else
+ rtl92s_phy_set_rf_reg(hw, rfpath,
+ radio_b_table[i],
+ MASK20BITS,
+ radio_b_table[i + 1]);
+
+ /* Add delay for ECS T20 & LG malow platform */
+ udelay(1);
+ }
+ break;
+ case RF90_PATH_C:
+ break;
+ case RF90_PATH_D:
+ break;
+ default:
+ break;
+ }
+ return true;
+}
+
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 i;
+ u32 arraylength;
+ u32 *ptraArray;
+
+ arraylength = MAC_2T_ARRAYLENGTH;
+ ptraArray = rtl8192semac_2t_array;
+
+ for (i = 0; i < arraylength; i = i + 2)
+ rtl_write_byte(rtlpriv, ptraArray[i], (u8)ptraArray[i + 1]);
+ return true;
+}
+
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ bool rtstatus;
+ u8 pathmap, index, rf_num = 0;
+
+ _rtl92s_phy_init_register_definition(hw);
+
+ /* Config BB and AGC */
+ rtstatus = _rtl92s_phy_bb_config_parafile(hw);
+
+
+ /* Check BB/RF confiuration setting. */
+ /* We only need to configure RF which is turned on. */
+ pathmap = (u8)(rtl92s_phy_query_bb_reg(hw, RFPGA0_TXINFO, 0xf) |
+ rtl92s_phy_query_bb_reg(hw, ROFDM0_TRXPATHENABLE,
+ 0xf));
+
+ rtlphy->rf_pathmap = pathmap;
+ for (index = 0; index < 4; index++) {
+ if ((pathmap >> index) & 0x1)
+ rf_num++;
+ }
+
+ if ((rtlphy->rf_type == RF_1T1R && rf_num != 1) ||
+ (rtlphy->rf_type == RF_1T2R && rf_num != 2) ||
+ (rtlphy->rf_type == RF_2T2R && rf_num != 2) ||
+ (rtlphy->rf_type == RF_2T2R_GREEN && rf_num != 2)) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG,
+ ("RF_Type(%x) does not match RF_Num(%x)!!\n",
+ rtlphy->rf_type, rf_num));
+ }
+ return rtstatus;
+}
+
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /* Initialize general global value */
+ if (rtlphy->rf_type == RF_1T1R)
+ rtlphy->num_total_rfpath = 1;
+ else
+ rtlphy->num_total_rfpath = 2;
+
+ /* Config BB and RF */
+ return rtl92s_phy_rf6052_config(hw);
+}
+
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ /* read rx initial gain */
+ rtlphy->default_initialgain[0] = rtl_get_bbreg(hw,
+ ROFDM0_XAAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[1] = rtl_get_bbreg(hw,
+ ROFDM0_XBAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[2] = rtl_get_bbreg(hw,
+ ROFDM0_XCAGCCORE1, MASKBYTE0);
+ rtlphy->default_initialgain[3] = rtl_get_bbreg(hw,
+ ROFDM0_XDAGCCORE1, MASKBYTE0);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, ("Default initial gain "
+ "(c50=0x%x, c58=0x%x, c60=0x%x, c68=0x%x)\n",
+ rtlphy->default_initialgain[0],
+ rtlphy->default_initialgain[1],
+ rtlphy->default_initialgain[2],
+ rtlphy->default_initialgain[3]));
+
+ /* read framesync */
+ rtlphy->framesync = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR3,
+ MASKBYTE0);
+ rtlphy->framesync_c34 = rtl_get_bbreg(hw, ROFDM0_RXDETECTOR2,
+ MASKDWORD);
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
+ ("Default framesync (0x%x) = 0x%x\n",
+ ROFDM0_RXDETECTOR3, rtlphy->framesync));
+}
+
+static void _rtl92s_phy_get_txpower_index(struct ieee80211_hw *hw, u8 channel,
+ u8 *cckpowerlevel, u8 *ofdmpowerLevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 index = (channel - 1);
+
+ /* 1. CCK */
+ /* RF-A */
+ cckpowerlevel[0] = rtlefuse->txpwrlevel_cck[0][index];
+ /* RF-B */
+ cckpowerlevel[1] = rtlefuse->txpwrlevel_cck[1][index];
+
+ /* 2. OFDM for 1T or 2T */
+ if (rtlphy->rf_type == RF_1T2R || rtlphy->rf_type == RF_1T1R) {
+ /* Read HT 40 OFDM TX power */
+ ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_1s[0][index];
+ ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_1s[1][index];
+ } else if (rtlphy->rf_type == RF_2T2R) {
+ /* Read HT 40 OFDM TX power */
+ ofdmpowerLevel[0] = rtlefuse->txpwrlevel_ht40_2s[0][index];
+ ofdmpowerLevel[1] = rtlefuse->txpwrlevel_ht40_2s[1][index];
+ }
+}
+
+static void _rtl92s_phy_ccxpower_indexcheck(struct ieee80211_hw *hw,
+ u8 channel, u8 *cckpowerlevel, u8 *ofdmpowerlevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ rtlphy->cur_cck_txpwridx = cckpowerlevel[0];
+ rtlphy->cur_ofdm24g_txpwridx = ofdmpowerlevel[0];
+}
+
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ /* [0]:RF-A, [1]:RF-B */
+ u8 cckpowerlevel[2], ofdmpowerLevel[2];
+
+ if (rtlefuse->txpwr_fromeprom == false)
+ return;
+
+ /* Mainly we use RF-A Tx Power to write the Tx Power registers,
+ * but the RF-B Tx Power must be calculated by the antenna diff.
+ * So we have to rewrite Antenna gain offset register here.
+ * Please refer to BB register 0x80c
+ * 1. For CCK.
+ * 2. For OFDM 1T or 2T */
+ _rtl92s_phy_get_txpower_index(hw, channel, &cckpowerlevel[0],
+ &ofdmpowerLevel[0]);
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Channel-%d, cckPowerLevel (A / B) = "
+ "0x%x / 0x%x, ofdmPowerLevel (A / B) = 0x%x / 0x%x\n",
+ channel, cckpowerlevel[0], cckpowerlevel[1],
+ ofdmpowerLevel[0], ofdmpowerLevel[1]));
+
+ _rtl92s_phy_ccxpower_indexcheck(hw, channel, &cckpowerlevel[0],
+ &ofdmpowerLevel[0]);
+
+ rtl92s_phy_rf6052_set_ccktxpower(hw, cckpowerlevel[0]);
+ rtl92s_phy_rf6052_set_ofdmtxpower(hw, &ofdmpowerLevel[0], channel);
+
+}
+
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u16 pollingcnt = 10000;
+ u32 tmpvalue;
+
+ /* Make sure that CMD IO has be accepted by FW. */
+ do {
+ udelay(10);
+
+ tmpvalue = rtl_read_dword(rtlpriv, WFM5);
+ if (tmpvalue == 0)
+ break;
+ } while (--pollingcnt);
+
+ if (pollingcnt == 0)
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, ("Set FW Cmd fail!!\n"));
+}
+
+
+static void _rtl92s_phy_set_fwcmd_io(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 input, current_aid = 0;
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ /* We re-map RA related CMD IO to combinational ones */
+ /* if FW version is v.52 or later. */
+ switch (rtlhal->current_fwcmd_io) {
+ case FW_CMD_RA_REFRESH_N:
+ rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_N_COMB;
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ rtlhal->current_fwcmd_io = FW_CMD_RA_REFRESH_BG_COMB;
+ break;
+ default:
+ break;
+ }
+
+ switch (rtlhal->current_fwcmd_io) {
+ case FW_CMD_RA_RESET:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, ("FW_CMD_RA_RESET\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_RESET);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_ACTIVE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, ("FW_CMD_RA_ACTIVE\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ACTIVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_N:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_N\n"));
+ input = FW_RA_REFRESH;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_ENABLE_RSSI_MASK);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_BG\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_REFRESH);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ rtl_write_dword(rtlpriv, WFM5, FW_RA_DISABLE_RSSI_MASK);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_N_COMB:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_N_COMB\n"));
+ input = FW_RA_IOT_N_COMB;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_RA_REFRESH_BG_COMB:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_RA_REFRESH_BG_COMB\n"));
+ input = FW_RA_IOT_BG_COMB;
+ rtl_write_dword(rtlpriv, WFM5, input);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_IQK_ENABLE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG, ("FW_CMD_IQK_ENABLE\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_IQK_ENABLE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_PAUSE_DM_BY_SCAN:
+ /* Lower initial gain */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+ break;
+ case FW_CMD_RESUME_DM_BY_SCAN:
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+ rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
+ break;
+ case FW_CMD_HIGH_PWR_DISABLE:
+ if (rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE)
+ break;
+
+ /* Lower initial gain */
+ rtl_set_bbreg(hw, ROFDM0_XAAGCCORE1, MASKBYTE0, 0x17);
+ rtl_set_bbreg(hw, ROFDM0_XBAGCCORE1, MASKBYTE0, 0x17);
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0x40);
+ break;
+ case FW_CMD_HIGH_PWR_ENABLE:
+ if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+ (rtlpriv->dm.dynamic_txpower_enable == true))
+ break;
+
+ /* CCA threshold */
+ rtl_set_bbreg(hw, RCCK0_CCA, MASKBYTE2, 0xcd);
+ break;
+ case FW_CMD_LPS_ENTER:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_LPS_ENTER\n"));
+ current_aid = rtlpriv->mac80211.assoc_id;
+ rtl_write_dword(rtlpriv, WFM5, (FW_LPS_ENTER |
+ ((current_aid | 0xc000) << 8)));
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ /* FW set TXOP disable here, so disable EDCA
+ * turbo mode until driver leave LPS */
+ break;
+ case FW_CMD_LPS_LEAVE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_LPS_LEAVE\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_LPS_LEAVE);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_ADD_A2_ENTRY:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_DMESG,
+ ("FW_CMD_ADD_A2_ENTRY\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_ADD_A2_ENTRY);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ case FW_CMD_CTRL_DM_BY_DRIVER:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("FW_CMD_CTRL_DM_BY_DRIVER\n"));
+ rtl_write_dword(rtlpriv, WFM5, FW_CTRL_DM_BY_DRIVER);
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+ break;
+ default:
+ break;
+ }
+
+ rtl92s_phy_chk_fwcmd_iodone(hw);
+
+ /* Clear FW CMD operation flag. */
+ rtlhal->set_fwcmd_inprogress = false;
+}
+
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fw_cmdio)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 fw_param = FW_CMD_IO_PARA_QUERY(rtlpriv);
+ u16 fw_cmdmap = FW_CMD_IO_QUERY(rtlpriv);
+ bool bPostProcessing = false;
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set FW Cmd(%#x), set_fwcmd_inprogress(%d)\n",
+ fw_cmdio, rtlhal->set_fwcmd_inprogress));
+
+ do {
+ /* We re-map to combined FW CMD ones if firmware version */
+ /* is v.53 or later. */
+ switch (fw_cmdio) {
+ case FW_CMD_RA_REFRESH_N:
+ fw_cmdio = FW_CMD_RA_REFRESH_N_COMB;
+ break;
+ case FW_CMD_RA_REFRESH_BG:
+ fw_cmdio = FW_CMD_RA_REFRESH_BG_COMB;
+ break;
+ default:
+ break;
+ }
+
+ /* If firmware version is v.62 or later,
+ * use FW_CMD_IO_SET for FW_CMD_CTRL_DM_BY_DRIVER */
+ if (hal_get_firmwareverison(rtlpriv) >= 0x3E) {
+ if (fw_cmdio == FW_CMD_CTRL_DM_BY_DRIVER)
+ fw_cmdio = FW_CMD_CTRL_DM_BY_DRIVER_NEW;
+ }
+
+
+ /* We shall revise all FW Cmd IO into Reg0x364
+ * DM map table in the future. */
+ switch (fw_cmdio) {
+ case FW_CMD_RA_INIT:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("RA init!!\n"));
+ fw_cmdmap |= FW_RA_INIT_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_INIT_CTL);
+ break;
+ case FW_CMD_DIG_DISABLE:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set DIG disable!!\n"));
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_DIG_ENABLE:
+ case FW_CMD_DIG_RESUME:
+ if (!(rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE)) {
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set DIG enable or resume!!\n"));
+ fw_cmdmap |= (FW_DIG_ENABLE_CTL | FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ }
+ break;
+ case FW_CMD_DIG_HALT:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set DIG halt!!\n"));
+ fw_cmdmap &= ~(FW_DIG_ENABLE_CTL | FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_TXPWR_TRACK_THERMAL: {
+ u8 thermalval = 0;
+ fw_cmdmap |= FW_PWR_TRK_CTL;
+
+ /* Clear FW parameter in terms of thermal parts. */
+ fw_param &= FW_PWR_TRK_PARAM_CLR;
+
+ thermalval = rtlpriv->dm.thermalvalue;
+ fw_param |= ((thermalval << 24) |
+ (rtlefuse->thermalmeter[0] << 16));
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("Set TxPwr tracking!! "
+ "FwCmdMap(%#x), FwParam(%#x)\n", fw_cmdmap,
+ fw_param));
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_PWR_TRK_CTL);
+ }
+ break;
+ /* The following FW CMDs are only compatible to v.53 or later.*/
+ case FW_CMD_RA_REFRESH_N_COMB:
+ fw_cmdmap |= FW_RA_N_CTL;
+
+ /* Clear RA BG mode control. */
+ fw_cmdmap &= ~(FW_RA_BG_CTL | FW_RA_INIT_CTL);
+
+ /* Clear FW parameter in terms of RA parts. */
+ fw_param &= FW_RA_PARAM_CLR;
+
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("[FW CMD] [New Version] "
+ "Set RA/IOT Comb in n mode!! FwCmdMap(%#x), "
+ "FwParam(%#x)\n", fw_cmdmap, fw_param));
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_N_CTL);
+ break;
+ case FW_CMD_RA_REFRESH_BG_COMB:
+ fw_cmdmap |= FW_RA_BG_CTL;
+
+ /* Clear RA n-mode control. */
+ fw_cmdmap &= ~(FW_RA_N_CTL | FW_RA_INIT_CTL);
+ /* Clear FW parameter in terms of RA parts. */
+ fw_param &= FW_RA_PARAM_CLR;
+
+ FW_CMD_PARA_SET(rtlpriv, fw_param);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_RA_BG_CTL);
+ break;
+ case FW_CMD_IQK_ENABLE:
+ fw_cmdmap |= FW_IQK_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ /* Clear control flag to sync with FW. */
+ FW_CMD_IO_CLR(rtlpriv, FW_IQK_CTL);
+ break;
+ /* The following FW CMD is compatible to v.62 or later. */
+ case FW_CMD_CTRL_DM_BY_DRIVER_NEW:
+ fw_cmdmap |= FW_DRIVER_CTRL_DM_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ /* The followed FW Cmds needs post-processing later. */
+ case FW_CMD_RESUME_DM_BY_SCAN:
+ fw_cmdmap |= (FW_DIG_ENABLE_CTL|FW_HIGH_PWR_ENABLE_CTL|
+ FW_SS_CTL);
+
+ if (rtlpriv->dm.dm_flag & HAL_DM_DIG_DISABLE ||
+ !digtable.dig_enable_flag)
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+ if ((rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) ||
+ (rtlpriv->dm.dynamic_txpower_enable == true))
+ fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+
+ if ((digtable.dig_ext_port_stage ==
+ DIG_EXT_PORT_STAGE_0) ||
+ (digtable.dig_ext_port_stage ==
+ DIG_EXT_PORT_STAGE_1))
+ fw_cmdmap &= ~FW_DIG_ENABLE_CTL;
+
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_PAUSE_DM_BY_SCAN:
+ fw_cmdmap &= ~(FW_DIG_ENABLE_CTL|FW_HIGH_PWR_ENABLE_CTL|
+ FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_HIGH_PWR_DISABLE:
+ fw_cmdmap &= ~FW_HIGH_PWR_ENABLE_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ break;
+ case FW_CMD_HIGH_PWR_ENABLE:
+ if (!(rtlpriv->dm.dm_flag & HAL_DM_HIPWR_DISABLE) &&
+ (rtlpriv->dm.dynamic_txpower_enable != true)) {
+ fw_cmdmap |= (FW_HIGH_PWR_ENABLE_CTL |
+ FW_SS_CTL);
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ bPostProcessing = true;
+ }
+ break;
+ case FW_CMD_DIG_MODE_FA:
+ fw_cmdmap |= FW_FA_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_DIG_MODE_SS:
+ fw_cmdmap &= ~FW_FA_CTL;
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ case FW_CMD_PAPE_CONTROL:
+ RT_TRACE(rtlpriv, COMP_CMD, DBG_LOUD,
+ ("[FW CMD] Set PAPE Control\n"));
+ fw_cmdmap &= ~FW_PAPE_CTL_BY_SW_HW;
+
+ FW_CMD_IO_SET(rtlpriv, fw_cmdmap);
+ break;
+ default:
+ /*Pass to original FW CMD processing callback routine.*/
+ bPostProcessing = true;
+ break;
+ }
+ } while (false);
+
+ /* We shall post processing these FW CMD if
+ * variable bPostProcessing is set. */
+ if (bPostProcessing && !rtlhal->set_fwcmd_inprogress) {
+ rtlhal->set_fwcmd_inprogress = true;
+ /* Update current FW Cmd for callback use. */
+ rtlhal->current_fwcmd_io = fw_cmdio;
+ } else {
+ return false;
+ }
+
+ _rtl92s_phy_set_fwcmd_io(hw);
+ return true;
+}
+
+static void _rtl92s_phy_check_ephy_switchready(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ u32 delay = 100;
+ u8 regu1;
+
+ regu1 = rtl_read_byte(rtlpriv, 0x554);
+ while ((regu1 & BIT(5)) && (delay > 0)) {
+ regu1 = rtl_read_byte(rtlpriv, 0x554);
+ delay--;
+ /* We delay only 50us to prevent
+ * being scheduled out. */
+ udelay(50);
+ }
+}
+
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ /* The way to be capable to switch clock request
+ * when the PG setting does not support clock request.
+ * This is the backdoor solution to switch clock
+ * request before ASPM or D3. */
+ rtl_write_dword(rtlpriv, 0x540, 0x73c11);
+ rtl_write_dword(rtlpriv, 0x548, 0x2407c);
+
+ /* Switch EPHY parameter!!!! */
+ rtl_write_word(rtlpriv, 0x550, 0x1000);
+ rtl_write_byte(rtlpriv, 0x554, 0x20);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ rtl_write_word(rtlpriv, 0x550, 0xa0eb);
+ rtl_write_byte(rtlpriv, 0x554, 0x3e);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ rtl_write_word(rtlpriv, 0x550, 0xff80);
+ rtl_write_byte(rtlpriv, 0x554, 0x39);
+ _rtl92s_phy_check_ephy_switchready(hw);
+
+ /* Delay L1 enter time */
+ if (ppsc->support_aspm && !ppsc->support_backdoor)
+ rtl_write_byte(rtlpriv, 0x560, 0x40);
+ else
+ rtl_write_byte(rtlpriv, 0x560, 0x00);
+
+}
+
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 BeaconInterval)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ rtl_write_dword(rtlpriv, WFM5, 0xF1000000 | (BeaconInterval << 8));
+}
+
===================================================================
@@ -0,0 +1,101 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+#ifndef __RTL92S_PHY_H__
+#define __RTL92S_PHY_H__
+
+#define MAX_TXPWR_IDX_NMODE_92S 63
+#define MAX_DOZE_WAITING_TIMES_9x 64
+
+/* Channel switch:The size of
+ * command tables for switch channel */
+#define MAX_PRECMD_CNT 16
+#define MAX_RFDEPENDCMD_CNT 16
+#define MAX_POSTCMD_CNT 16
+
+#define RF90_PATH_MAX 4
+
+enum version_8192s {
+ VERSION_8192S_ACUT,
+ VERSION_8192S_BCUT,
+ VERSION_8192S_CCUT
+};
+
+enum swchnlcmd_id {
+ CMDID_END,
+ CMDID_SET_TXPOWEROWER_LEVEL,
+ CMDID_BBREGWRITE10,
+ CMDID_WRITEPORT_ULONG,
+ CMDID_WRITEPORT_USHORT,
+ CMDID_WRITEPORT_UCHAR,
+ CMDID_RF_WRITEREG,
+};
+
+struct swchnlcmd {
+ enum swchnlcmd_id cmdid;
+ u32 para1;
+ u32 para2;
+ u32 msdelay;
+};
+
+enum baseband_config_type {
+ /* Radio Path A */
+ BASEBAND_CONFIG_PHY_REG = 0,
+ /* Radio Path B */
+ BASEBAND_CONFIG_AGC_TAB = 1,
+};
+
+#define hal_get_firmwareverison(rtlpriv) \
+ (((struct rt_firmware *)((rtlpriv)->rtlhal.pfirmware))->firmwareversion)
+
+u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask,
+ u32 data);
+void rtl92s_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation);
+u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask);
+void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath,
+ u32 regaddr, u32 bitmask, u32 data);
+void rtl92s_phy_set_bw_mode(struct ieee80211_hw *hw,
+ enum nl80211_channel_type ch_type);
+u8 rtl92s_phy_sw_chnl(struct ieee80211_hw *hw);
+bool rtl92s_phy_set_rf_power_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate rfpower_state);
+bool rtl92s_phy_mac_config(struct ieee80211_hw *hw);
+void rtl92s_phy_switch_ephy_parameter(struct ieee80211_hw *hw);
+bool rtl92s_phy_bb_config(struct ieee80211_hw *hw);
+bool rtl92s_phy_rf_config(struct ieee80211_hw *hw);
+void rtl92s_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw);
+void rtl92s_phy_set_txpower(struct ieee80211_hw *hw, u8 channel);
+bool rtl92s_phy_set_fw_cmd(struct ieee80211_hw *hw, enum fwcmd_iotype fwcmd_io);
+void rtl92s_phy_chk_fwcmd_iodone(struct ieee80211_hw *hw);
+void rtl92s_phy_set_beacon_hwreg(struct ieee80211_hw *hw, u16 beaconinterval);
+u8 rtl92s_phy_config_rf(struct ieee80211_hw *hw, enum radio_path rfpath) ;
+
+#endif
+