@@ -2,7 +2,7 @@ rsi_91x-y += rsi_91x_main.o
rsi_91x-y += rsi_91x_core.o
rsi_91x-y += rsi_91x_mac80211.o
rsi_91x-y += rsi_91x_mgmt.o
-rsi_91x-y += rsi_91x_pkt.o
+rsi_91x-y += rsi_91x_hal.o
rsi_91x-$(CONFIG_RSI_DEBUGFS) += rsi_91x_debugfs.o
rsi_usb-y += rsi_91x_usb.o rsi_91x_usb_ops.o
new file mode 100644
@@ -0,0 +1,215 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_mgmt.h"
+
+/**
+ * rsi_send_data_pkt() - This function sends the recieved data packet from
+ * driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *tmp_hdr;
+ struct ieee80211_tx_info *info;
+ struct skb_info *tx_params;
+ struct ieee80211_bss_conf *bss;
+ int status;
+ u8 ieee80211_size = MIN_802_11_HDR_LEN;
+ u8 extnd_size;
+ __le16 *frame_desc;
+ u16 seq_num;
+
+ info = IEEE80211_SKB_CB(skb);
+ bss = &info->control.vif->bss_conf;
+ tx_params = (struct skb_info *)info->driver_data;
+
+ if (!bss->assoc) {
+ status = -EINVAL;
+ goto err;
+ }
+
+ tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
+ seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
+
+ extnd_size = ((uintptr_t)skb->data & 0x3);
+
+ if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+ status = -ENOSPC;
+ goto err;
+ }
+
+ skb_push(skb, (FRAME_DESC_SZ + extnd_size));
+ frame_desc = (__le16 *)&skb->data[0];
+ memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
+
+ if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
+ ieee80211_size += 2;
+ frame_desc[6] |= cpu_to_le16(BIT(12));
+ }
+
+ if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
+ (common->secinfo.security_enable)) {
+ if (rsi_is_cipher_wep(common))
+ ieee80211_size += 4;
+ else
+ ieee80211_size += 8;
+ frame_desc[6] |= cpu_to_le16(BIT(15));
+ }
+
+ frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_DATA_Q << 12));
+ frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
+
+ if (common->min_rate != 0xffff) {
+ /* Send fixed rate */
+ frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ frame_desc[4] = cpu_to_le16(common->min_rate);
+
+ if (conf_is_ht40(&common->priv->hw->conf))
+ frame_desc[5] = cpu_to_le16(FULL40M_ENABLE);
+
+ if (common->vif_info[0].sgi) {
+ if (common->min_rate & 0x100) /* Only MCS rates */
+ frame_desc[4] |=
+ cpu_to_le16(ENABLE_SHORTGI_RATE);
+ }
+
+ }
+
+ frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
+ frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
+ (skb->priority & 0xf) |
+ (tx_params->sta_id << 8));
+
+ status = adapter->host_intf_write_pkt(common->priv,
+ skb->data,
+ skb->len);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
+ __func__);
+
+err:
+ ++common->tx_stats.total_tx_pkt_freed[skb->priority];
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
+
+/**
+ * rsi_send_mgmt_pkt() - This functions sends the received management packet
+ * from driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_mgmt_pkt(struct rsi_common *common,
+ struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *wh;
+ struct ieee80211_tx_info *info;
+ struct ieee80211_bss_conf *bss;
+ struct ieee80211_hw *hw = adapter->hw;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct skb_info *tx_params;
+ int status = -E2BIG;
+ __le16 *msg;
+ u8 extnd_size;
+ u8 vap_id = 0;
+
+ info = IEEE80211_SKB_CB(skb);
+ tx_params = (struct skb_info *)info->driver_data;
+ extnd_size = ((uintptr_t)skb->data & 0x3);
+
+ if (tx_params->flags & INTERNAL_MGMT_PKT) {
+ if ((extnd_size) > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+ dev_kfree_skb(skb);
+ return -ENOSPC;
+ }
+ skb_push(skb, extnd_size);
+ skb->data[extnd_size + 4] = extnd_size;
+ status = adapter->host_intf_write_pkt(common->priv,
+ (u8 *)skb->data,
+ skb->len);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write the packet\n", __func__);
+ }
+ dev_kfree_skb(skb);
+ return status;
+ }
+
+ bss = &info->control.vif->bss_conf;
+ wh = (struct ieee80211_hdr *)&skb->data[0];
+
+ if (FRAME_DESC_SZ > skb_headroom(skb))
+ goto err;
+
+ skb_push(skb, FRAME_DESC_SZ);
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ msg = (__le16 *)skb->data;
+
+ if (skb->len > MAX_MGMT_PKT_SIZE) {
+ rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
+ goto err;
+ }
+
+ msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ msg[1] = cpu_to_le16(TX_DOT11_MGMT);
+ msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
+ msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
+
+ if (wh->addr1[0] & BIT(0))
+ msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
+
+ if (common->band == NL80211_BAND_2GHZ)
+ msg[4] = cpu_to_le16(RSI_11B_MODE);
+ else
+ msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
+
+ if (conf_is_ht40(conf)) {
+ msg[4] = cpu_to_le16(0xB | RSI_11G_MODE);
+ msg[5] = cpu_to_le16(0x6);
+ }
+
+ /* Indicate to firmware to give cfm */
+ if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
+ msg[1] |= cpu_to_le16(BIT(10));
+ msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
+ common->mgmt_q_block = true;
+ }
+
+ msg[7] |= cpu_to_le16(vap_id << 8);
+
+ status = adapter->host_intf_write_pkt(common->priv,
+ (u8 *)msg,
+ skb->len);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
+
+err:
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
deleted file mode 100644
@@ -1,215 +0,0 @@
-/**
- * Copyright (c) 2014 Redpine Signals Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "rsi_mgmt.h"
-
-/**
- * rsi_send_data_pkt() - This function sends the recieved data packet from
- * driver to device.
- * @common: Pointer to the driver private structure.
- * @skb: Pointer to the socket buffer structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
-{
- struct rsi_hw *adapter = common->priv;
- struct ieee80211_hdr *tmp_hdr;
- struct ieee80211_tx_info *info;
- struct skb_info *tx_params;
- struct ieee80211_bss_conf *bss;
- int status;
- u8 ieee80211_size = MIN_802_11_HDR_LEN;
- u8 extnd_size;
- __le16 *frame_desc;
- u16 seq_num;
-
- info = IEEE80211_SKB_CB(skb);
- bss = &info->control.vif->bss_conf;
- tx_params = (struct skb_info *)info->driver_data;
-
- if (!bss->assoc) {
- status = -EINVAL;
- goto err;
- }
-
- tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
- seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
-
- extnd_size = ((uintptr_t)skb->data & 0x3);
-
- if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
- rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
- status = -ENOSPC;
- goto err;
- }
-
- skb_push(skb, (FRAME_DESC_SZ + extnd_size));
- frame_desc = (__le16 *)&skb->data[0];
- memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
-
- if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
- ieee80211_size += 2;
- frame_desc[6] |= cpu_to_le16(BIT(12));
- }
-
- if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
- (common->secinfo.security_enable)) {
- if (rsi_is_cipher_wep(common))
- ieee80211_size += 4;
- else
- ieee80211_size += 8;
- frame_desc[6] |= cpu_to_le16(BIT(15));
- }
-
- frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
- (RSI_WIFI_DATA_Q << 12));
- frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
-
- if (common->min_rate != 0xffff) {
- /* Send fixed rate */
- frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
- frame_desc[4] = cpu_to_le16(common->min_rate);
-
- if (conf_is_ht40(&common->priv->hw->conf))
- frame_desc[5] = cpu_to_le16(FULL40M_ENABLE);
-
- if (common->vif_info[0].sgi) {
- if (common->min_rate & 0x100) /* Only MCS rates */
- frame_desc[4] |=
- cpu_to_le16(ENABLE_SHORTGI_RATE);
- }
-
- }
-
- frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
- frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
- (skb->priority & 0xf) |
- (tx_params->sta_id << 8));
-
- status = adapter->host_intf_write_pkt(common->priv,
- skb->data,
- skb->len);
- if (status)
- rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
- __func__);
-
-err:
- ++common->tx_stats.total_tx_pkt_freed[skb->priority];
- rsi_indicate_tx_status(common->priv, skb, status);
- return status;
-}
-
-/**
- * rsi_send_mgmt_pkt() - This functions sends the received management packet
- * from driver to device.
- * @common: Pointer to the driver private structure.
- * @skb: Pointer to the socket buffer structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-int rsi_send_mgmt_pkt(struct rsi_common *common,
- struct sk_buff *skb)
-{
- struct rsi_hw *adapter = common->priv;
- struct ieee80211_hdr *wh;
- struct ieee80211_tx_info *info;
- struct ieee80211_bss_conf *bss;
- struct ieee80211_hw *hw = adapter->hw;
- struct ieee80211_conf *conf = &hw->conf;
- struct skb_info *tx_params;
- int status = -E2BIG;
- __le16 *msg;
- u8 extnd_size;
- u8 vap_id = 0;
-
- info = IEEE80211_SKB_CB(skb);
- tx_params = (struct skb_info *)info->driver_data;
- extnd_size = ((uintptr_t)skb->data & 0x3);
-
- if (tx_params->flags & INTERNAL_MGMT_PKT) {
- if ((extnd_size) > skb_headroom(skb)) {
- rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
- dev_kfree_skb(skb);
- return -ENOSPC;
- }
- skb_push(skb, extnd_size);
- skb->data[extnd_size + 4] = extnd_size;
- status = adapter->host_intf_write_pkt(common->priv,
- (u8 *)skb->data,
- skb->len);
- if (status) {
- rsi_dbg(ERR_ZONE,
- "%s: Failed to write the packet\n", __func__);
- }
- dev_kfree_skb(skb);
- return status;
- }
-
- bss = &info->control.vif->bss_conf;
- wh = (struct ieee80211_hdr *)&skb->data[0];
-
- if (FRAME_DESC_SZ > skb_headroom(skb))
- goto err;
-
- skb_push(skb, FRAME_DESC_SZ);
- memset(skb->data, 0, FRAME_DESC_SZ);
- msg = (__le16 *)skb->data;
-
- if (skb->len > MAX_MGMT_PKT_SIZE) {
- rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
- goto err;
- }
-
- msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
- (RSI_WIFI_MGMT_Q << 12));
- msg[1] = cpu_to_le16(TX_DOT11_MGMT);
- msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
- msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
- msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
-
- if (wh->addr1[0] & BIT(0))
- msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
-
- if (common->band == NL80211_BAND_2GHZ)
- msg[4] = cpu_to_le16(RSI_11B_MODE);
- else
- msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
-
- if (conf_is_ht40(conf)) {
- msg[4] = cpu_to_le16(0xB | RSI_11G_MODE);
- msg[5] = cpu_to_le16(0x6);
- }
-
- /* Indicate to firmware to give cfm */
- if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
- msg[1] |= cpu_to_le16(BIT(10));
- msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
- common->mgmt_q_block = true;
- }
-
- msg[7] |= cpu_to_le16(vap_id << 8);
-
- status = adapter->host_intf_write_pkt(common->priv,
- (u8 *)msg,
- skb->len);
- if (status)
- rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
-
-err:
- rsi_indicate_tx_status(common->priv, skb, status);
- return status;
-}
The file 'rsi_91x_hal.c' is going to contain device specific code like firmware loading etc. As the file 'rsi_91x_pkt.c' contains code for preparing device (frimware understandable) specific descriptors for the transmit frames, it is moved to 'rsi_91x_hal.c' Signed-off-by: Prameela Rani Garnepudi <prameela.j04cs@gmail.com> --- drivers/net/wireless/rsi/Makefile | 2 +- drivers/net/wireless/rsi/rsi_91x_hal.c | 215 +++++++++++++++++++++++++++++++++ drivers/net/wireless/rsi/rsi_91x_pkt.c | 215 --------------------------------- 3 files changed, 216 insertions(+), 216 deletions(-) create mode 100644 drivers/net/wireless/rsi/rsi_91x_hal.c delete mode 100644 drivers/net/wireless/rsi/rsi_91x_pkt.c