diff mbox

[for-4.12,1/3] brcmfmac: add parameter to pass error code in firmware callback

Message ID 1497268054-4507-2-git-send-email-arend.vanspriel@broadcom.com (mailing list archive)
State Accepted
Commit 6d0507a777fbc533f7f1bf5664a81982dd50dece
Delegated to: Kalle Valo
Headers show

Commit Message

Arend van Spriel June 12, 2017, 11:47 a.m. UTC 
Extend the parameters in the firmware callback so it can be called
upon success and failure. This allows the caller to properly clear
all resources in the failure path. Right now the error code is
always zero, ie. success.

Cc: stable@vger.kernel.org # 4.9.x-
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Reviewed-by: Franky Lin <franky.lin@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
---
 .../net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 10 +++++-----
 .../net/wireless/broadcom/brcm80211/brcmfmac/firmware.h |  4 ++--
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 17 ++++++++++++-----
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 17 +++++++++++------
 drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c  |  6 ++++--
 5 files changed, 34 insertions(+), 20 deletions(-)

Comments

Kalle Valo June 15, 2017, 4:08 p.m. UTC | #1 
Arend Van Spriel <arend.vanspriel@broadcom.com> wrote:

> Extend the parameters in the firmware callback so it can be called
> upon success and failure. This allows the caller to properly clear
> all resources in the failure path. Right now the error code is
> always zero, ie. success.
> 
> Cc: stable@vger.kernel.org # 4.9.x-
> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
> Reviewed-by: Franky Lin <franky.lin@broadcom.com>
> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>

3 patches applied to wireless-drivers.git, thanks.

6d0507a777fb brcmfmac: add parameter to pass error code in firmware callback
03fb0e8393fa brcmfmac: use firmware callback upon failure to load
7a51461fc2da brcmfmac: unbind all devices upon failure in firmware callback
Kalle Valo June 15, 2017, 4:17 p.m. UTC | #2 
Arend van Spriel <arend.vanspriel@broadcom.com> writes:

> Extend the parameters in the firmware callback so it can be called
> upon success and failure. This allows the caller to properly clear
> all resources in the failure path. Right now the error code is
> always zero, ie. success.
>
> Cc: stable@vger.kernel.org # 4.9.x-
> Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
> Reviewed-by: Franky Lin <franky.lin@broadcom.com>
> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>

[...]

> -static void brcmf_usb_probe_phase2(struct device *dev,
> +static void brcmf_usb_probe_phase2(struct device *dev, int ret,
>  				   const struct firmware *fw,
>  				   void *nvram, u32 nvlen)
>  {
>  	struct brcmf_bus *bus = dev_get_drvdata(dev);
>  	struct brcmf_usbdev_info *devinfo;
> -	int ret;
> +
> +	if (ret)
> +		goto error;

This introduces a new warning:

drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c:1198:2: warning:
‘devinfo’ may be used uninitialized in this function
[-Wmaybe-uninitialized]

From a quick look I think it's valid, but due to my mistake I only
noticed it after I had applied the patch. So can you send a small
followup patch to fix this, please?
diff mbox

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index c7c1e99..ae61a24 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -442,7 +442,7 @@  struct brcmf_fw {
 	const char *nvram_name;
 	u16 domain_nr;
 	u16 bus_nr;
-	void (*done)(struct device *dev, const struct firmware *fw,
+	void (*done)(struct device *dev, int err, const struct firmware *fw,
 		     void *nvram_image, u32 nvram_len);
 };
 
@@ -477,7 +477,7 @@  static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx)
 	if (!nvram && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
 		goto fail;
 
-	fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length);
+	fwctx->done(fwctx->dev, 0, fwctx->code, nvram, nvram_length);
 	kfree(fwctx);
 	return;
 
@@ -499,7 +499,7 @@  static void brcmf_fw_request_code_done(const struct firmware *fw, void *ctx)
 
 	/* only requested code so done here */
 	if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) {
-		fwctx->done(fwctx->dev, fw, NULL, 0);
+		fwctx->done(fwctx->dev, 0, fw, NULL, 0);
 		kfree(fwctx);
 		return;
 	}
@@ -522,7 +522,7 @@  static void brcmf_fw_request_code_done(const struct firmware *fw, void *ctx)
 
 int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
 				const char *code, const char *nvram,
-				void (*fw_cb)(struct device *dev,
+				void (*fw_cb)(struct device *dev, int err,
 					      const struct firmware *fw,
 					      void *nvram_image, u32 nvram_len),
 				u16 domain_nr, u16 bus_nr)
@@ -555,7 +555,7 @@  int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
 
 int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
 			   const char *code, const char *nvram,
-			   void (*fw_cb)(struct device *dev,
+			   void (*fw_cb)(struct device *dev, int err,
 					 const struct firmware *fw,
 					 void *nvram_image, u32 nvram_len))
 {
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h
index d3c9f0d..8fa4b7e 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.h
@@ -73,13 +73,13 @@  int brcmf_fw_map_chip_to_name(u32 chip, u32 chiprev,
  */
 int brcmf_fw_get_firmwares_pcie(struct device *dev, u16 flags,
 				const char *code, const char *nvram,
-				void (*fw_cb)(struct device *dev,
+				void (*fw_cb)(struct device *dev, int err,
 					      const struct firmware *fw,
 					      void *nvram_image, u32 nvram_len),
 				u16 domain_nr, u16 bus_nr);
 int brcmf_fw_get_firmwares(struct device *dev, u16 flags,
 			   const char *code, const char *nvram,
-			   void (*fw_cb)(struct device *dev,
+			   void (*fw_cb)(struct device *dev, int err,
 					 const struct firmware *fw,
 					 void *nvram_image, u32 nvram_len));
 
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index f36b96d..f878706 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1650,16 +1650,23 @@  static void brcmf_pcie_buscore_activate(void *ctx, struct brcmf_chip *chip,
 	.write32 = brcmf_pcie_buscore_write32,
 };
 
-static void brcmf_pcie_setup(struct device *dev, const struct firmware *fw,
+static void brcmf_pcie_setup(struct device *dev, int ret,
+			     const struct firmware *fw,
 			     void *nvram, u32 nvram_len)
 {
-	struct brcmf_bus *bus = dev_get_drvdata(dev);
-	struct brcmf_pciedev *pcie_bus_dev = bus->bus_priv.pcie;
-	struct brcmf_pciedev_info *devinfo = pcie_bus_dev->devinfo;
+	struct brcmf_bus *bus;
+	struct brcmf_pciedev *pcie_bus_dev;
+	struct brcmf_pciedev_info *devinfo;
 	struct brcmf_commonring **flowrings;
-	int ret;
 	u32 i;
 
+	/* check firmware loading result */
+	if (ret)
+		goto fail;
+
+	bus = dev_get_drvdata(dev);
+	pcie_bus_dev = bus->bus_priv.pcie;
+	devinfo = pcie_bus_dev->devinfo;
 	brcmf_pcie_attach(devinfo);
 
 	/* Some of the firmwares have the size of the memory of the device
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index e034500..6e1fcdc 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -3982,21 +3982,26 @@  static void brcmf_sdio_buscore_write32(void *ctx, u32 addr, u32 val)
 	.get_memdump = brcmf_sdio_bus_get_memdump,
 };
 
-static void brcmf_sdio_firmware_callback(struct device *dev,
+static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 					 const struct firmware *code,
 					 void *nvram, u32 nvram_len)
 {
-	struct brcmf_bus *bus_if = dev_get_drvdata(dev);
-	struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
-	struct brcmf_sdio *bus = sdiodev->bus;
-	int err = 0;
+	struct brcmf_bus *bus_if;
+	struct brcmf_sdio_dev *sdiodev;
+	struct brcmf_sdio *bus;
 	u8 saveclk;
 
-	brcmf_dbg(TRACE, "Enter: dev=%s\n", dev_name(dev));
+	brcmf_dbg(TRACE, "Enter: dev=%s, err=%d\n", dev_name(dev), err);
+	if (err)
+		goto fail;
 
+	bus_if = dev_get_drvdata(dev);
 	if (!bus_if->drvr)
 		return;
 
+	sdiodev = bus_if->bus_priv.sdio;
+	bus = sdiodev->bus;
+
 	/* try to download image and nvram to the dongle */
 	bus->alp_only = true;
 	err = brcmf_sdio_download_firmware(bus, code, nvram, nvram_len);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
index e4d545f..9ce3b55 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
@@ -1159,13 +1159,15 @@  static int brcmf_usb_bus_setup(struct brcmf_usbdev_info *devinfo)
 	return ret;
 }
 
-static void brcmf_usb_probe_phase2(struct device *dev,
+static void brcmf_usb_probe_phase2(struct device *dev, int ret,
 				   const struct firmware *fw,
 				   void *nvram, u32 nvlen)
 {
 	struct brcmf_bus *bus = dev_get_drvdata(dev);
 	struct brcmf_usbdev_info *devinfo;
-	int ret;
+
+	if (ret)
+		goto error;
 
 	brcmf_dbg(USB, "Start fw downloading\n");