diff mbox series

[5/5] ASoC: rt286: Generalize support for ALC3263 codec

Message ID 20210418134658.4333-6-david.ward@gatech.edu (mailing list archive)
State Accepted
Commit aa2f9c12821e6a4ba1df4fb34a3dbc6a2a1ee7fe
Headers show
Series ASoC: rt286/rt298: Fixes for DMIC2 config and combo jack | expand

Commit Message

David Ward April 18, 2021, 1:46 p.m. UTC 
The ALC3263 codec on the XPS 13 9343 is also found on the Latitude 13 7350
and Venue 11 Pro 7140. They require the same handling for the combo jack to
work with a headset: GPIO pin 6 must be set.

The HDA driver always sets this pin on the ALC3263, which it distinguishes
by the codec vendor/device ID 0x10ec0288 and PCI subsystem vendor ID 0x1028
(Dell). The ASoC driver does not use PCI, so adapt this check to use DMI to
determine if Dell is the system vendor.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=150601
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205961
Signed-off-by: David Ward <david.ward@gatech.edu>
---
 sound/soc/codecs/rt286.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/sound/soc/codecs/rt286.c b/sound/soc/codecs/rt286.c
index 45e4a48ef5bf..802f4851c3df 100644
--- a/sound/soc/codecs/rt286.c
+++ b/sound/soc/codecs/rt286.c
@@ -1125,12 +1125,11 @@  static const struct dmi_system_id force_combo_jack_table[] = {
 	{ }
 };
 
-static const struct dmi_system_id dmi_dell_dino[] = {
+static const struct dmi_system_id dmi_dell[] = {
 	{
-		.ident = "Dell Dino",
+		.ident = "Dell",
 		.matches = {
 			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-			DMI_MATCH(DMI_PRODUCT_NAME, "XPS 13 9343")
 		}
 	},
 	{ }
@@ -1141,7 +1140,7 @@  static int rt286_i2c_probe(struct i2c_client *i2c,
 {
 	struct rt286_platform_data *pdata = dev_get_platdata(&i2c->dev);
 	struct rt286_priv *rt286;
-	int i, ret, val;
+	int i, ret, vendor_id;
 
 	rt286 = devm_kzalloc(&i2c->dev,	sizeof(*rt286),
 				GFP_KERNEL);
@@ -1157,14 +1156,15 @@  static int rt286_i2c_probe(struct i2c_client *i2c,
 	}
 
 	ret = regmap_read(rt286->regmap,
-		RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &val);
+		RT286_GET_PARAM(AC_NODE_ROOT, AC_PAR_VENDOR_ID), &vendor_id);
 	if (ret != 0) {
 		dev_err(&i2c->dev, "I2C error %d\n", ret);
 		return ret;
 	}
-	if (val != RT286_VENDOR_ID && val != RT288_VENDOR_ID) {
+	if (vendor_id != RT286_VENDOR_ID && vendor_id != RT288_VENDOR_ID) {
 		dev_err(&i2c->dev,
-			"Device with ID register %#x is not rt286\n", val);
+			"Device with ID register %#x is not rt286\n",
+			vendor_id);
 		return -ENODEV;
 	}
 
@@ -1188,8 +1188,8 @@  static int rt286_i2c_probe(struct i2c_client *i2c,
 	if (pdata)
 		rt286->pdata = *pdata;
 
-	if (dmi_check_system(force_combo_jack_table) ||
-		dmi_check_system(dmi_dell_dino))
+	if ((vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) ||
+		dmi_check_system(force_combo_jack_table))
 		rt286->pdata.cbj_en = true;
 
 	regmap_write(rt286->regmap, RT286_SET_AUDIO_POWER, AC_PWRST_D3);
@@ -1228,7 +1228,7 @@  static int rt286_i2c_probe(struct i2c_client *i2c,
 	regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL3, 0xf777, 0x4737);
 	regmap_update_bits(rt286->regmap, RT286_DEPOP_CTRL4, 0x00ff, 0x003f);
 
-	if (dmi_check_system(dmi_dell_dino)) {
+	if (vendor_id == RT288_VENDOR_ID && dmi_check_system(dmi_dell)) {
 		regmap_update_bits(rt286->regmap,
 			RT286_SET_GPIO_MASK, 0x40, 0x40);
 		regmap_update_bits(rt286->regmap,