@@ -202,38 +202,74 @@ snd_pcm_uframes_t hda_dsp_pcm_pointer(struct snd_sof_dev *sdev,
goto found;
}
- /*
- * DPIB/posbuf position mode:
- * For Playback, Use DPIB register from HDA space which
- * reflects the actual data transferred.
- * For Capture, Use the position buffer for pointer, as DPIB
- * is not accurate enough, its update may be completed
- * earlier than the data written to DDR.
- */
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ switch (sof_hda_position_quirk) {
+ case SOF_HDA_POSITION_QUIRK_USE_SKYLAKE_LEGACY:
+ /*
+ * This legacy code, inherited from the Skylake driver,
+ * mixes DPIB registers and DPIB DDR updates and
+ * does not seem to follow any known hardware recommendations.
+ * It's not clear e.g. why there is a different flow
+ * for capture and playback, the only information that matters is
+ * what traffic class is used, and on all SOF-enabled platforms
+ * only VC0 is supported so the work-around was likely not necessary
+ * and quite possibly wrong.
+ */
+
+ /* DPIB/posbuf position mode:
+ * For Playback, Use DPIB register from HDA space which
+ * reflects the actual data transferred.
+ * For Capture, Use the position buffer for pointer, as DPIB
+ * is not accurate enough, its update may be completed
+ * earlier than the data written to DDR.
+ */
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
+ pos = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR,
+ AZX_REG_VS_SDXDPIB_XBASE +
+ (AZX_REG_VS_SDXDPIB_XINTERVAL *
+ hstream->index));
+ } else {
+ /*
+ * For capture stream, we need more workaround to fix the
+ * position incorrect issue:
+ *
+ * 1. Wait at least 20us before reading position buffer after
+ * the interrupt generated(IOC), to make sure position update
+ * happens on frame boundary i.e. 20.833uSec for 48KHz.
+ * 2. Perform a dummy Read to DPIB register to flush DMA
+ * position value.
+ * 3. Read the DMA Position from posbuf. Now the readback
+ * value should be >= period boundary.
+ */
+ usleep_range(20, 21);
+ snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR,
+ AZX_REG_VS_SDXDPIB_XBASE +
+ (AZX_REG_VS_SDXDPIB_XINTERVAL *
+ hstream->index));
+ pos = snd_hdac_stream_get_pos_posbuf(hstream);
+ }
+ break;
+ case SOF_HDA_POSITION_QUIRK_USE_DPIB_REGISTERS:
+ /*
+ * In case VC1 traffic is disabled this is the recommended option
+ */
pos = snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR,
AZX_REG_VS_SDXDPIB_XBASE +
(AZX_REG_VS_SDXDPIB_XINTERVAL *
hstream->index));
- } else {
+ break;
+ case SOF_HDA_POSITION_QUIRK_USE_DPIB_DDR_UPDATE:
/*
- * For capture stream, we need more workaround to fix the
- * position incorrect issue:
- *
- * 1. Wait at least 20us before reading position buffer after
- * the interrupt generated(IOC), to make sure position update
- * happens on frame boundary i.e. 20.833uSec for 48KHz.
- * 2. Perform a dummy Read to DPIB register to flush DMA
- * position value.
- * 3. Read the DMA Position from posbuf. Now the readback
- * value should be >= period boundary.
+ * This is the recommended option when VC1 is enabled.
+ * While this isn't needed for SOF platforms it's added for
+ * consistency and debug.
*/
- usleep_range(20, 21);
- snd_sof_dsp_read(sdev, HDA_DSP_HDA_BAR,
- AZX_REG_VS_SDXDPIB_XBASE +
- (AZX_REG_VS_SDXDPIB_XINTERVAL *
- hstream->index));
pos = snd_hdac_stream_get_pos_posbuf(hstream);
+ break;
+ default:
+ dev_err_once(sdev->dev, "hda_position_quirk value %d not supported\n",
+ sof_hda_position_quirk);
+ pos = 0;
+ break;
}
if (pos >= hstream->bufsize)
@@ -432,6 +432,10 @@ MODULE_PARM_DESC(use_msi, "SOF HDA use PCI MSI mode");
#define hda_use_msi (1)
#endif
+int sof_hda_position_quirk = SOF_HDA_POSITION_QUIRK_USE_DPIB_REGISTERS;
+module_param_named(position_quirk, sof_hda_position_quirk, int, 0444);
+MODULE_PARM_DESC(position_quirk, "SOF HDaudio position quirk");
+
static char *hda_model;
module_param(hda_model, charp, 0444);
MODULE_PARM_DESC(hda_model, "Use the given HDA board model.");
@@ -610,7 +614,10 @@ static int hda_init(struct snd_sof_dev *sdev)
/* HDA bus init */
sof_hda_bus_init(bus, &pci->dev);
- bus->use_posbuf = 1;
+ if (sof_hda_position_quirk == SOF_HDA_POSITION_QUIRK_USE_DPIB_REGISTERS)
+ bus->use_posbuf = 0;
+ else
+ bus->use_posbuf = 1;
bus->bdl_pos_adj = 0;
bus->sync_write = 1;
@@ -740,4 +740,10 @@ struct sof_ipc_dai_config;
int hda_ctrl_dai_widget_setup(struct snd_soc_dapm_widget *w, unsigned int quirk_flags);
int hda_ctrl_dai_widget_free(struct snd_soc_dapm_widget *w, unsigned int quirk_flags);
+#define SOF_HDA_POSITION_QUIRK_USE_SKYLAKE_LEGACY (0) /* previous implementation */
+#define SOF_HDA_POSITION_QUIRK_USE_DPIB_REGISTERS (1) /* recommended if VC0 only */
+#define SOF_HDA_POSITION_QUIRK_USE_DPIB_DDR_UPDATE (2) /* recommended with VC0 or VC1 */
+
+extern int sof_hda_position_quirk;
+
#endif