diff mbox series

[49/49] regmap-irq: Remove not_fixed_stride flag

Message ID 20220620200644.1961936-50-aidanmacdonald.0x0@gmail.com (mailing list archive)
State New, archived
Headers show
Series regmap-irq cleanups and refactoring | expand

Commit Message

Aidan MacDonald June 20, 2022, 8:06 p.m. UTC
Clean up all the cruft related to not_fixed_stride. The same thing
can be accomplished with a custom get_irq_reg() callback.

Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
---
 drivers/base/regmap/regmap-irq.c | 41 +++-----------------------------
 include/linux/regmap.h           |  7 ------
 2 files changed, 3 insertions(+), 45 deletions(-)
diff mbox series

Patch

diff --git a/drivers/base/regmap/regmap-irq.c b/drivers/base/regmap/regmap-irq.c
index acbd6e22b0cd..0c9dd218614a 100644
--- a/drivers/base/regmap/regmap-irq.c
+++ b/drivers/base/regmap/regmap-irq.c
@@ -320,15 +320,8 @@  static inline int read_sub_irq_data(struct regmap_irq_chip_data *data,
 			unsigned int offset = subreg->offset[i];
 			unsigned int index = offset / map->reg_stride;
 
-			if (chip->not_fixed_stride)
-				ret = regmap_read(map,
-						chip->status_base + offset,
-						&data->status_buf[b]);
-			else
-				ret = regmap_read(map,
-						chip->status_base + offset,
-						&data->status_buf[index]);
-
+			ret = regmap_read(map, chip->status_base + offset,
+					  &data->status_buf[index]);
 			if (ret)
 				break;
 		}
@@ -380,18 +373,7 @@  static irqreturn_t regmap_irq_thread(int irq, void *d)
 		 * sake of simplicity. and add bulk reads only if needed
 		 */
 		for (i = 0; i < chip->num_main_regs; i++) {
-			/*
-			 * For not_fixed_stride, don't use get_irq_reg().
-			 * It would produce an incorrect result.
-			 */
-			if (data->chip->not_fixed_stride)
-				reg = chip->main_status +
-					(i * map->reg_stride *
-					 data->irq_reg_stride);
-			else
-				reg = data->get_irq_reg(data,
-							chip->main_status, i);
-
+			reg = data->get_irq_reg(data, chip->main_status, i);
 			ret = regmap_read(map, reg, &data->main_status_buf[i]);
 			if (ret) {
 				dev_err(map->dev,
@@ -561,17 +543,6 @@  unsigned int regmap_irq_get_irq_reg_linear(struct regmap_irq_chip_data *data,
 	const struct regmap_irq_chip *chip = data->chip;
 	struct regmap *map = data->map;
 
-	/*
-	 * NOTE: This is for backward compatibility only and will be removed
-	 * when not_fixed_stride is dropped (it's only used by qcom-pm8008).
-	 */
-	if (chip->not_fixed_stride && chip->sub_reg_offsets) {
-		struct regmap_irq_sub_irq_map *subreg;
-
-		subreg = &chip->sub_reg_offsets[0];
-		return base + subreg->offset[0];
-	}
-
 	return base + index * (map->reg_stride * chip->irq_reg_stride);
 }
 EXPORT_SYMBOL_GPL(regmap_irq_get_irq_reg_linear);
@@ -674,12 +645,6 @@  int regmap_add_irq_chip_fwnode(struct fwnode_handle *fwnode,
 			return -EINVAL;
 	}
 
-	if (chip->not_fixed_stride) {
-		for (i = 0; i < chip->num_regs; i++)
-			if (chip->sub_reg_offsets[i].num_regs != 1)
-				return -EINVAL;
-	}
-
 	if (irq_base) {
 		irq_base = irq_alloc_descs(irq_base, 0, chip->num_irqs, 0);
 		if (irq_base < 0) {
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index be51af0a2425..ecd3682de269 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -1446,9 +1446,6 @@  struct regmap_irq_chip_data;
  *		     status_base. Should contain num_regs arrays.
  *		     Can be provided for chips with more complex mapping than
  *		     1.st bit to 1.st sub-reg, 2.nd bit to 2.nd sub-reg, ...
- *		     When used with not_fixed_stride, each one-element array
- *		     member contains offset calculated as address from each
- *		     peripheral to first peripheral.
  * @num_main_regs: Number of 'main status' irq registers for chips which have
  *		   main_status set.
  *
@@ -1474,9 +1471,6 @@  struct regmap_irq_chip_data;
  * @clear_on_unmask: For chips with interrupts cleared on read: read the status
  *                   registers before unmasking interrupts to clear any bits
  *                   set when they were masked.
- * @not_fixed_stride: Used when chip peripherals are not laid out with fixed
- * 		      stride. Must be used with sub_reg_offsets containing the
- * 		      offsets to each peripheral.
  * @status_invert: Inverted status register: cleared bits are active interrupts.
  * @runtime_pm:  Hold a runtime PM lock on the device when accessing it.
  *
@@ -1529,7 +1523,6 @@  struct regmap_irq_chip {
 	bool runtime_pm:1;
 	bool type_in_mask:1;
 	bool clear_on_unmask:1;
-	bool not_fixed_stride:1;
 	bool status_invert:1;
 
 	int num_regs;