mbox series

[v2,0/2] ath10k: SAR power limit vendor command

Message ID 1595823458-3926-1-git-send-email-wgong@codeaurora.org (mailing list archive)
Headers show
Series ath10k: SAR power limit vendor command | expand

Message

Wen Gong July 27, 2020, 4:17 a.m. UTC 
v2: change description of "nl80211: vendor-cmd: qca: add dynamic SAR power limits"
remove ATH10K_WMI_SAR_*G_0_MASK of wmi.h

here's a patchset adding dynamic SAR power limit vendor command to
ath10k. This follows the new process documented in the wiki:

https://wireless.wiki.kernel.org/en/developers/documentation/nl80211#vendor-specific_api

Wen Gong (2):
  nl80211: vendor-cmd: qca: add dynamic SAR power limits
  ath10k: allow dynamic SAR power limits to be configured

 drivers/net/wireless/ath/ath10k/Makefile |   1 +
 drivers/net/wireless/ath/ath10k/core.c   |   2 +
 drivers/net/wireless/ath/ath10k/core.h   |   2 +
 drivers/net/wireless/ath/ath10k/hw.h     |   3 +
 drivers/net/wireless/ath/ath10k/mac.c    |  64 +++++++++++++
 drivers/net/wireless/ath/ath10k/mac.h    |   2 +-
 drivers/net/wireless/ath/ath10k/vendor.c | 114 +++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/vendor.h |  13 +++
 include/uapi/nl80211-vnd-qca.h           |  68 ++++++++++++++
 9 files changed, 268 insertions(+), 1 deletion(-)
 create mode 100644 drivers/net/wireless/ath/ath10k/vendor.c
 create mode 100644 drivers/net/wireless/ath/ath10k/vendor.h
 create mode 100644 include/uapi/nl80211-vnd-qca.h